• 한국수소및신에너지학회논문집
• /
• 제33권5호
• /
• pp.525-533
• /
• 2022

In this study, in order to numerically analyze the heat flow characteristics in the valve according to the opening rate for the solenoid valve for hydrogen supply applied to the hydrogen storage tank, flow characteristics were comparatively analyzed. Through the analysis of pressure and temperature distributions within the valve according to the high-pressure supply condition of 70 MPa or more, the heat flow characteristics in the valve, inlet and outlet passage according to the opening rate of the valve were identified. As a result a sudden change in the fluid behavior appears in the neck region of the valve, and it is understood that the flow separation caused by the flow path shape of the expanded tube has a dominant influence on the flow characteristics. And, it was confirmed that the shape of the valve seat is a factor significantly affecting the improvement of flow rate and differential pressure performance.

• 한국가스학회지
• /
• 제2권3호
• /
• pp.37-48
• /
• 1998

밀폐된 초저온액화가스 저장탱크에 액화질소의 충전량을 바꾸어 가면서 시간이 경과함에 따른 탱크 내부의 여러 가지 변화에 대해 조사하였다. 탱크 내부의 압력, 온도, 액체와 기체의 비율 등의 변화는 충전된 액체의 양에 의존한다. 탱크에 충전된 액체의 양에 따라 (1)액면이 높아지면서 액화를 동반하기도 하고, (2)액면이 높아짐에도 불구하고 초기에는 액체의 기화가 일어나다가 압력이 높아지면 다시 액화가 일어나기도 하며, (3)액면은 일정하게 유지되지만 액체의 기화가 일어나기도 하며, (4)액면이 낮아짐과 동시에 액체의 기화가 일어나는 등 다양한 변화를 나타내었다. 탱크에 액체를 가득 채우면 압력이 급상승하여 매우 위험하므로 안전수칙에 따라 $90\%$ 이하 충전해야한다. 탱크가 완전히 밀폐되어 있을 경우, 탱크를 액체로 가득 채우면 불과 5일만에 80bar의 압력상승을 가져오지만, $90\%$ 충전하면 5일 동안에 겨우 1.5bar의 압력상승이 일어난다. 그러나 어느 경우이건 액체를 충전한 채 탱크를 완전히 밀폐시킨 뒤 장기간 방치하는 것은 대단히 위험하다.

• 한국가스학회지
• /
• 제26권6호
• /
• pp.9-15
• /
• 2022

사용 압력 범위에서 고압 수소 탱크의 내구성을 검증하기 위해서는 수압 파열 시험이 수행되어야 한다. 그런데 물의 초기 주입 과정에서 물과 공기의 상호작용에 의해 생성된 기포가 탱크 내벽에 부착되어 잔류할 경우, 가압된 탱크가 파열되는 과정에서 기포의 급격한 압력 변화로 인해 큰 충격과 소음이 유발된다. 따라서 본 연구에서는 단순화된 수식을 통하여 탱크 내벽에 잔류하는 기포를 제거하기 위해 필요한 유속을 예측하였으며, 수소 버스용수소 용기 형상을 기준으로 해당 유속을 유지하기 위한 주입 노즐의 형상을 결정하였다. 또한 입구 압력에 따른 유속 변화를 예측하기 위하여 수치 해석 모델의 개발이 수행되었고, 예측 결과의 타당성을 입증하기 위하여 모형 제작을 통한 실험이 수행되었다. 실험 결과, 탱크 벽면 근처의 유속은 해석모델 예측 값과 유사하게 나타났으며, 입구 압력이 1.5 ~ 5.5 bar 일 경우 제거 가능한 기포의 최소 크기는 약 2.2 ~ 4.6 mm로 예측되었다.

• 대한조선학회논문집
• /
• 제40권6호
• /
• pp.80-87
• /
• 2003

Tank structures in ships are in contact with various fluid. The vibration characteristics of those structures are strongly affected by the added mass due to containing fluid. It is important to predict vibration characteristics of tank structures, but it is difficult to do. That's because the interaction problem concerned with the free surface, the variation of water depth and stiffener is to be considered between the fluid and the structure. Many authors have studied vibration of rectangular tank structures containing water. Kito studied added mass effect of water in contact with thin elastic flat plates. Kim et al. studied flexural vibration of stiffened plates in contact with water. However, few researches on dynamic interaction tank walls with water are reported in the vibration of rectangular tanks recently. in the present report, the coupling effect of added mass of fluid and structural constraint between panels on each vibration mode changing breadth of elastic plate, and dynamic pressure distribution have investigated numerically and discussed.

• Wind and Structures
• /
• 제31권6호
• /
• pp.495-508
• /
• 2020

To investigate the structural behaviour of grouped tanks under wind loads, 2 problems need to be figured out, wind pressures on tank shells and critical loads of the shell under these pressure distribution patterns. Following the wind tunnel tests described in the companion paper, this paper firstly seeks to obtain wind loads on the external wall in a squarely-arranged cylindrical tank group by numerical simulation, considering various layouts. The outcomes demonstrate that the numerical method can provide similar results on wind pressures and better insights on grouping effects through extracted streamlines. Then, geometrically nonlinear analyses are performed using several selected potentially unfavourable wind pressure distributions. It is found that the critical load is controlled by limit point buckling when the tank is empty while excessive deformations when the tank is full. In particular, significant reductions of wind resistance are found on grouped full tanks compared to the isolated tank, considering both serviceability and ultimate limit state, which should receive special attention if the tank is expected to resist severe wind loads with the increase of liquid level.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.487-496
• /
• 2002

Hydrodynamic behavior and response of vertical-cylindrical liquid-storage tank is considered. The equation of the liquid motion is shown by Laplace's differential equation with the fluid velocity potential. The solution of the Laplace's differential equation of the liquid motion is expressed with the modified Bessel functions. Only rigid tank is studied. The equivalent masses and heights for the tank contents are presented for engineering design model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.700-705
• /
• 2003

The general cooling tower is a device for making a cooling water in refrigerant condensers or industrial process heat exchangers. The present cooling tower have defects with noises, complicated structure and environmental problems. In this paper, we constituted a new water cooling system by using a evaporating latent heat in an enclosed tank, and this system is consisted of an enclosed vacuum tank and water driving ejector system. Several experimental cases were carried out for improvement methods of high vacuum pressure and water cooling characteristics. The ejector performance was tested in case of water temperature variations that flows in the ejector. Based on the vacuum pressure by water driving ejector, the water cooling characteristics were investigated for the vaporized air condensing effects.

• 한국가스학회지
• /
• 제11권4호
• /
• pp.85-90
• /
• 2007

본 논문에서는 유한요소법을 사용하여 댐핑안전 구조물을 설치한 완전밀폐식 LNG 저장탱크 시스템의 강도안전성에 대해 해석하였다. 내부탱크의 FEM 해석을 위해, 탱크에 저장된 LNG에 의한 유체정압, 초저온 온도하중, BOG 압력, LNG 자중량, 내부탱크의 코너 측벽면에 가해진 침하하중 등과 같은 모든 복합하중을 내부탱크 구조물에 적용하였다. FEM 계산결과에 의하면 기존의 내부탱크는 주어진 모든 하중 조건에 대하여 안전하지만, 압축 스프링과 같은 댐핑안전 구조물은 탱크시스템의 안전성을 확보하는데 대단히 유용한 구조물일 것이라는 사실이다. 따라서 스프링의 강점도를 높이고 최적의 설치위치를 찾으면 스프링 구조물에 의해 탱크시스템의 댐핑강도 안전성을 증가시킬 수 있는 중요한 설계요소가 될 것이다.

• 한국해양공학회지
• /
• 제33권4호
• /
• pp.358-363
• /
• 2019

The acoustic power is used as a primary index characterizing underwater sound sources and could be defined by its source level. The source level has been assessed using various experimental techniques such as the reverberation time method and reverberant tank plot method. While the reverberation time method requires reverberation time data extracted in a preliminary experiment in a reverberant water tank, the reverberant tank plot method only needs acoustic pressure data directly obtained at the reverberation water tank. In this research, these experimental techniques were studied in comparative experiments to estimate the source levels of underwater sources in a reverberant water tank. This paper summarizes the basic theories and procedures of these experimental techniques and presents the experimental results for an underwater source in a long cuboid water tank using each technique, along with a discussion.

• 대한기계학회논문집B
• /
• 제31권3호
• /
• pp.217-224
• /
• 2007

A numerical analysis for a silencer with three baffles of 120mm tank gun has been performed. The Reynolds-Averaged Wavier-Stokes equations with Baldwin-Lomax turbulence model were employed to compute unsteady, compressible flow inside the tank gun and the silencer. An axisymmetric computational domain was constructed by using 12 multi block chimera grids. The resolution of flow field is observed by depicting calculated pressure and muzzle brake force. The peak blast pressure and noise through the silencer reduced approximately 99% and 41dB in comparison to the tank gun without the silencer at near filed.