• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.83-88
• /
• 2004

Acoustic modes of internal region of 4-hp scroll compressor are identified by measuring transfer functions between a reference and 84 measuring points. The corresponding acoustic mode-shapes and natural frequencies were calculated by analysis software SYSNOISE. There exist two clearly distinguishable dipole modes of vertical and horizontal direction and a single quadrupole mode in the frequency region of interest. It shows that the natural frequencies of the identified modes are linearly sensitive to suction pressure (Ps) but relatively in sensitive to discharge pressure (Pd) in operating condition.

• 식품과학과 산업
• /
• 제50권3호
• /
• pp.60-69
• /
• 2017

Kimchi is a traditional fermented food of Korea and made by salting and fermenting vegetables. A negative impression on kimchi as a great source of sodium intake has grown in Korea since 1980 as people argue that sodium is a major cause of high blood pressure and metabolic syndrome. While people are more interested in healthy living in Korea, the negative impression is stronger now. This study analyzes the sensitive and negative reaction to sodium intake from kimchi, and suggests an alternative in the viewpoint that the sensitive reaction is one of food faddism which is a very popular topic currently in Korea.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.196-201
• /
• 2004

Adhesive joints have been widely used for fastening thin adherends because they can distribute the load over a larger area than mechanical joints, require no hole, add very little weight to the structure and have superior fatigue resistance. However, the fatigue characteristics of adhesive joints are much affected by applied pressure during curing operation because actual curing temperature is changed by applied pressure and the adhesion characteristics of adhesives are very sensitive to manufacturing conditions. In this study, cure monitoring and torsional fatigue tests of adhesive joints with an epoxy adhesive were performed in order to investigate the effects of the applied pressure during curing operation. From the experiments, it was found that the actual curing temperature increased as the applied pressure increased, which increased residual thermal stress in the adhesive layer. Therefore, the fatigue life decreased as the applied pressure increased because the mean stress during fatigue tests increased due to the residual thermal stress.

• 소성∙가공
• /
• 제20권1호
• /
• pp.73-78
• /
• 2011

The flashing reduces the part quality and the productivity of the molding process. We developed a contact pressure sensor to detect the flashing immediately. The performance of the sensor was analyzed in a simple 2D simulation. The sensor was applied to an automotive bumper mold with cavity pressure sensors. It showed sensitive output signal for the mold response by the cavity pressure change. It was confirmed that the flashing at the gate area occurred in the filling stage by the pressure increase due to growth of the melt flow length. The sensor output was correlated with the cavity pressure sensor output.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.791-796
• /
• 2000

The cavitation-induced fluctuating pressure of the container ship named "Sydney Express" is measured in Samsung Large Cavitation Tunnel(SCAT). In the measurements, a complete ship model is employed. The effects of thrust coefficient and cavitation number on cavity pattern and cavitation-induced fluctuating pressure were investigated experimentally. It is demonstrated that the fluctuating pressure coefficient is very sensitive to the cavitation number. The results of cavitation and pressure fluctuations are compared with those of ITTC and HSVA, which shows fairly good agreement. It is exhibited that the removal of rudder can significantly change the loading condition of a propeller, and can reduce the fluctuating pressure coefficient almost by half.

• 한국고분자학회지:고분자과학과기술
• /
• 제6권6호
• /
• pp.585-594
• /
• 1995

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.102-102
• /
• 1993

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.127-127
• /
• 1993

• 한국의류학회지
• /
• 제34권10호
• /
• pp.1731-1741
• /
• 2010

Personal appearance attitude about the ideal beauty is influenced by the context of the culture one belongs to. In a cultural sphere the higher public self-consciousness individuals have then the more sensitive one would be to the sociocultural pressure about thinness and thus the higher the expectations about the ideal appearance. Accordingly, in that culture one would have more body shame when they do not reach the ideal beauty standard. This study examines the difference between Korean and German culture, with a focus on the age group of university students who are especially sensitive to aesthetic consciousness. The results are as follows: There were differences of public self-consciousness, perceived sociocultural pressure, appearance internalization, appearance awareness and body shame between the two cultural spheres; in addition, Korean female university students were significantly higher in all the variables when compared to German female university students. The higher public self-consciousness and perceived sociocultural pressure then the higher the internalization of the ideal appearance; the ideal appearance awareness increased the body shame. In the case of the German female university student group, public self-consciousness influenced body shame directly; however, in case of the Korean female university student group public self-consciousness were not directly affective. Rather, perceived sociocultural pressures directly affected body shame and showed the difference between the cultural spheres. Finally, in regards to the direct effect about body shame, the German female university student group noted the influence of public self-consciousness as the most significant; however, the Korean female university student group noted the influence of sociocultural pressure as the most significant.

• Archives of Pharmacal Research
• /
• 제24권6호
• /
• pp.578-583
• /
• 2001

To investigate the feasibility of developing a new tenoxicam plaster, the effects of vehicles and penetration enhancers on the in vitro permeation of tenoxicam from a pressure-sensititre adhesive (PSA) matrices across the dorsal hairless mouse skin were studied. Vehicles employed in this study were propylene glycol (PC)-oleyl alcohol (OAI), PG-oleic acid (OA), and diethylene glycol monoethyl ether (DCMI)-propylene glycol monolaurate (PCML) cosolvents with/without fatty acids. In this studys amines such as triethanolamine (TEA) and tromethamine (TM) were additionally used as a solubilized. Among PSAs used, $Duro-Tak^{\circledR}$87-2510 showed much higher release rate than either $Duro-Tak^{\circledR}$ 87-2100 or $Duro-Tak^{\circledR}$87-2196. The relatively high flux rate was obtained with the formulation of DCMI-PCML (40:60, v/v) with 3% OA and 5% TM, and the flux increased as a function of the dose;the initial flux up to 12 h was $4.98{\pm}1.38{\;}{\mu\textrm{g}}/{\textrm{cm}^2}/h$ at the tenoxicam dose of $50{\;} mg/70{\;}{\textrm{cm}^2}$. This flux was much higher than that of a commercial piroxicam patch ($Trast^{\circledR}$) ($1.24{\pm}0.73{\;}{\mu\textrm{g}}/$\textrm{cm}^2/hr$) with almost only one-third that of the commercial patch. Therefore, these observations indicated that these composition of tenoxicam plaster may be practically applicable.