• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1532-1548
• /
• 2008

The tunnel type spillways is under construction to increasing water reservoir capacity in Dae-am dam. The tunnel outlet was planned to be made after installing slope stabilization system on natural slope there. Generally, the tunnel outlet is made perpendicularly to the slope, but in this case, it had to be made obliquely to the slope for not interrupting flow of river. Because of excavation in condition of natural slope caused to deflecting earth pressure, the outlet couldn't be made. So, artificial ground made with concrete that it was constructed in the outside of tunnel for producing the arching effect which enables to make a outlet. We were planned tunnel excavation was carried out after artificial ground made. Artificial ground made by poor mix concrete of which it was planned that the thickness was at least 3.0m height from outside of tunnel lining and 30cm of height per pouring. Spreading and compaction was planned utilized weight of 15 ton roller machine. In order to access of working truck, slope of artificial ground was designed 1:1.0 and applied 2% slope in upper pert of it for easily drainage of water. In addition to, upper pert of artificial ground was covered with soil, because of impaction of rock fall from upper slope was made minimum. The tunnel excavation of the artificial ground was designed application with special blasting method that it was Super Wedge and control blasting utilized with pre-percussion hole.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.736-744
• /
• 2009

The abrupt failure of slope caused by a concentrated rainfall would be a disaster in this country. Specially, the soil slope may be collapsed by the rainfall seepage, however, there is not much information for the mechanism of slope failure during rainfall. As analyzing the stability of slope by rainfall, the conventional method is to put the ground-water level on the surface of slope. However, it may provide the over-reinforcement for the slope stability. Futhermore, although over-reinforcement for the slope was fulfilled, the possibility of potential slope failure still exists. In this study, the slope stability by the conventional design method and the causes of unstable slope during rainfall were investigated. To analyze the slope stability by rainfall, the computer program SEEP/W for the analysis of seepage was used. As changing the intensity and duration of rainfall in SEEP/W, the analysis were performed. After completion of analysis, the porewater pressure data from SEEP/W was applied to SLOPE/W. As a results of this analysis, it is not reasonable that the groundwater level is going up to the surface of slope during rainfall. Therefore, the conventional reinforcement for the slope stability is not obvious to satisfy the criterion safety factor during rainfall. The reasonable counterplan is to install drainage hole on the surface of slope in order to prevent erosion and debris flow.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.87-88
• /
• 2008

In the structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris (8-hydroxyquinoline)aluminum$(Alq_3)$/Al device, we studied the efficiency improvement of organic light-emitting diodes due to variation of deposition rate of TPD materials. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm, respectively under a base pressure of $5\times10^{-6}$Torr using a thermal evaporation. The $Alq_3$ used for an electron-transport and emissive layer were evaporated to be at a deposition rate of 2.5 $\AA$/s. When the deposition rate of TPD increased from 1.5 to 3.0 $\AA$/s, we found that the average roughness is rather smoother, external quantum efficiency is superior to the others when the deposition rate of TPD is 2.5 $\AA$/s. Compared to the ones from the devices made with the deposition rate of TPD 3.0 $\AA$/s, the external quantum efficiency was improved by a factor of eight.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.469-474
• /
• 2008

The objective of this study is to propose basic design guidelines for more effective air ventilation system in apartments. It is well known that ventilation depends on whether the room doors are open or closed as well as people's living patterns. This study considers 84 ㎡-sized apartment which has extended living room without balcony. Ventilation of bathroom and kitchen is not considered. The height of the building, external air pressure and air infiltration through the windows are also neglected. The regulation on indoor air quality made it mandatory that the air change per hour be more than 0.7. Four models are suggested to study the effect of open and closed doors. Models 1 and 3 are open door types and models 2 and 4 are closed door types. The open types have 50 mm hole near the top of the door to substitute exhaust outlet. The ventilation effectiveness was evaluated by 3-dimensional numerical simulation using finite volume method by a commercial software. This work compares air flow, temperature of air, age of air and the efficiency of ventilation of apartments with wooden doors of bedroom 1 and 2, which are open or closed.

• Nuclear Engineering and Technology
• /
• 제13권3호
• /
• pp.121-129
• /
• 1981

많은 기존 공식중 세계의 가장 우수한 최대 유량공식을 찾아, 그 세개의 한계유량공식의 개요와, 냉각재상실사고시 격납용기격리에 실패하는 경우를 특정지을 수 있는 구멍의 크기와 격납용기의 압력 및 온도 등이 주어진 상태하에서 격납용기로부터 외부대기로 방출되는 개략적인 핵분열생성물의 양을 추정하기 위한 계산절차를 제시하였다. 이상기체의 임계유량공식과 이상유(two-phase flow)의 최대유량을 산출하기 위한 무디(Moody)의 도표를 이용하여 계산실예를 제시하였으며, 그 결과를 콘뎀프트-앨티(CONTEMPT-LT) 전산코드의 질량유출공식을 콘버징 노즐(converging nozzle)을 통과하는 음속류(sonic flow)의 경우에 적용하여 산출한 값과 비교하여 보았다. 이리하여 이상 기체의 임계유량공식은 무디(Moody)의 공식이 주는 값과 거의 비슷한 결과를 줌을 입증하였다. 또한 냉각재상실 사고시 격납용기로부터의 유출율을 추정하기 위해서는 콘템프트-앨티(CONTEMPT-LT)의 질량유출공식을 사용하는 것보다 이상 기체의 최대유량공식을 사용하는 것이 더 보수적인 방법임을 보여 주었다.

• Nuclear Engineering and Technology
• /
• 제45권2호
• /
• pp.257-264
• /
• 2013

In Canada Deuterium Uranium (CANDU)-type nuclear power plants, the reactor is composed of 380 fuel channels and refueling is performed on one or two channels per day. At the time of refueling, the fluid force of the cooling water inside the channel is exploited. New fuel added upstream of the fuel channel is moved downstream by the fluid force of the cooling water, and the used fuel is pushed out. Through this process, refueling is completed. Among the 380 fuel channels, outer rows 1 and 2 (called the FARE channel) make the process of using only the internal fluid force impossible because of the low flow rate of the channel cooling water. Therefore, a Flow Assist Ram Extension (FARE) tool, a refueling aid, is used to refuel these channels in order to compensate for the insufficient fluid force. The FARE tool causes flow resistance, thus allowing the fuel to be moved down with the flow of cooling water. Although the existing FARE tool can perform refueling in Korean plants, the coolant flow rate is reduced to below 80% of the normal flow for some time during refueling. A Flow rate below 80% of the normal flow cause low flow rate alarm signal in the plant operation. A flow rate below 80% of the normal flow may cause difficulties in the plant operation because of the increase in the coolant temperature of the channel. A new and improved FARE tool is needed to address the limitations of the existing FARE tool. In this study, we identified the cause of the low flow phenomena of the existing FARE tool. A new and improved FARE tool has been designed and manufactured. The improved FARE tool has been tested many times using laboratory test apparatus and was redesigned until satisfactory results were obtained. In order to confirm the performance of the improved FARE tool in a real plant, the final design FARE tool was tested at Wolsong Nuclear Power Plant Unit 2. The test was carried out successfully and the low flow rate alarm signal was eliminated during refueling. Several additional improved FARE tools have been manufactured. These improved FARE tools are currently being used for Korean CANDU plant refueling.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.299-303
• /
• 2015

The electrolyte is an important component in determining the performance of Fuel Cells. Especially, investigation of the conduction properties of electrolytes plays a key role in determining the performance of the electrolyte. The electrochemical properties of Yttrium stabilized zirconia (YSZ) were measured to allow the use of this material as an electrolyte for solid oxide fuel cells (SOFC) in the temperature range of $700-1000^{\circ}C$ and in $0.21{\leq}pO_2/atm{\leq}10^{-23}$. A Hebb-Wagner polarization experimental cell was optimally manufactured; here we discuss typical problems associated with making cells. The partial conductivities due to electrons and holes for 8YSZ, which is known as a superior oxygen conductor, were obtained using I-V characteristics based on the Hebb-Wagner polarization method. Activation energies for holes and electrons are $3.99{\pm}0.17eV$ and $1.70{\pm}0.06eV$ respectively. Further, we calculated the oxygen ion conductivity with electron, hole, and total conductivity, which was obtained by DC four probe conductivity measurements. The oxygen ion conductivity was dependent on the temperature; the activation energy was $0.80{\pm}0.10eV$. The electrolyte domain was determined from the top limit, bottom limit, and boundary (p=n) of the oxygen partial pressure. As a result, the electrolyte domain was widely presented in an extensive range of oxygen partial pressures and temperatures.

• 마이크로전자및패키징학회지
• /
• 제17권1호
• /
• pp.47-53
• /
• 2010

본 연구에서는 솔더 페이스트를 이용한 프린팅 공정의 해석에 대해 연구를 수행하였다. 스텐실 프린팅 공정의 설계에서 중요한 인자는 프린팅 조건, 스텐실 설계, 그리고 솔더 페이스트의 물성 등이다. 본 연구에서는 이 인자들 중에서, 솔더 페이스트의 점도와 표면장력, 그리고 솔더 페이스트와 스텐실 사이의 접촉각이 프린팅 공정의 성능에 미치는 영향을 해석을 통해 파악하였다. 실제 해석에 앞서 압력에 의해서 솔더 페이스트가 스텐실에 채워지는 단순화된 형상과 조건으로 해석을 수행하였다. 해석은 마이크로 유동의 해석에 많이 이용이 되고 있는 상용 소프트웨어인 콤솔(COMSOL)을 이용하였고 축대칭으로 해석하였다. 해석 결과, 솔더 페이스트의 점도는 충진률에 큰 영향을 줌을 알 수 있었고 표면장력과 접촉각은 충진되는 형상에 영향을 줌을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.99-100
• /
• 2006

Silicon-on-insulator(SOI) MOSFET with SiGe/Si heterostructure channel is an attractive device due to its potent use for relaxing several limits of CMOS scaling, as well as because of high electron and hole mobility and low power dissipation operation and compatibility with Si CMOS standard processing. SOI technology is known as a possible solution for the problems of premature drain breakdown, hot carrier effects, and threshold voltage roll-off issues in sub-deca nano-scale devices. For the forthcoming generations, the combination of SiGe heterostructures and SOI can be the optimum structure, so that we have developed SOI n-MOSFETs with SiGe/Si heterostructure channel grown by reduced pressure chemical vapor deposition. The SOI n-MOSFETs with a SiGe/Si heterostructure are presented and their DC characteristics are discussed in terms of device structure and fabrication technology.

• 비파괴검사학회지
• /
• 제32권5호
• /
• pp.545-550
• /
• 2012

원자력발전소 증기발생기 세관은 방사성물질이 외부로 누출되지 않도록 압력경계 역할을 하는 주요부품이다. 설비 운전기간이 증가함에 따라 이차측에서 유입된 슬러지가 증기발생기 2차측 유체 흐름을 따라 상부로 이동하면서 유체비등과 난류에 의해 세관 외면에 스케일이 부착되어 세관열화, 유로홈 막힘 및 열전달을 감소시키는 파울링을 유발하는 원인으로 작용한다. 따라서, 원전 운영자는 세관 외면에 쌓인 스케일의 두께를 확인하여 일정시점이 되면 화학세정 등의 정비를 수행한다. 본 논문에서는 보빈코일 와전류신호를 이용하여 세관 외면에 부착된 스케일 두께를 정량적으로 평가하는 기술을 개발하고자 스케일 시험편을 제작하여 스케일 두께와 와전류신호 진폭 간의 상관관계를 분석하였고, 이를 바탕으로 스케일의 두께를 정량적으로 평가하는 기법과 대량의 와전류 데이터를 평가할 수 있는 프로그램을 개발하였다.