• International Journal of Vascular Biomedical Engineering
• /
• 제4권1호
• /
• pp.9-16
• /
• 2006

In this article we introduce computer models that have been developed in the past to determine the concentration of metabolic gases, the oxygen and carbon dioxide, along the pulmonary circulation. The terminal concentration of these gases in the arterial blood is related with the total change of the partial pressure of the same gases in the alveoli for the time beginning with inspiration and ending with expiration. It is affected not only by the ventilation-perfusion ratio and the gas diffusion capacity of the lung membrane but also by the pulmonary defect such as shunt, dead space, diffusion impairment and ventilation-perfusion mismatch. Some pathological pulmonary symptoms such as ARDS and CDPD can be understood through the mathematical models of these pulmonary dysfunctions. Quantitative study on the blood oxygenation process using various computer models is therefore of foremost importance in order to monitor not only the pulmonary health but also the cardiac output and cell metabolism. Reviewed in this paper include the basic and advanced methods that enable numerical study on the gas exchange and on the arterial oxygenation process, which might depend on the various heart and lung physiological conditions listed above.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.136-147
• /
• 2015

Dead-ended operation of Proton Exchange Membrane Fuel Cell(PEMFC) provides the simplification of fuel cell systems to reduce fuel consumption and weight of fuel cell. However, the water accumulation within the channel prohibits a uniform supply of fuel. Optimization of the purge strategy is required to increase the fuel cell efficiency since fuel and water are removed during the purge process. In this study, we investigated the average voltage output which depends on two interrelated conditions, namely, the supply gas pressure, purging valve open time. In addition, flow visualization was performed to better understand the water build-up on the anode side and cathode side of PEMFC in terms of a variety of the current density. We analyzed the correlation between the purge condition and water flooding.

• BMB Reports
• /
• 제30권4호
• /
• pp.274-279
• /
• 1997

Acetolactate synthase (ALS) catalyzes the first common step in the biosynthesis of branchedchain amino acids, valine, leucine, and isoleucine. ALS is the target site for several structually diverse classes of herbicides including sulfonylureas, imidazolinones. and triazolopyrimidines. We have purified ALS from etiolated barley shoots to homogeneity. The five major purification steps are ammonium sulfate fractionation, DEAE anion exchange, hydroxylapatite, Bio-Gel A gel filtration, and low pressure Mono-Q chrornatoqraphy. Approximately 170-fold purification was achieved and the yield was 0.45% of initial activity in the crude extract. Both SDS-PAGE and Western blot analysis showed a single polypeptide of ALS with an apparent molecular mass of 64 kDa. The result of nondenaturing gel electrophoresis with activity staining indicated that the molecular mass of its native form is approximately 225 to 250 kDa. The values of $K_m$ for pyruvate. pl. and optimum pH of ALS were determined to be 2.0 mM, 5.2. and 7.0. respectively Feedback inhibition studies showed that ALS is more susceptible to leucine than valine. And $IC_{50}$ value of Cadre, a class of irnidazolinones, is about $1.5\mu{M}$ for ALS.

• Biomolecules & Therapeutics
• /
• 제4권1호
• /
• pp.46-50
• /
• 1996

Inhibition of the growth of human cancer cells by proteins secreted from 373-L1 cells was investigated in the present study. The growth of human cancer cells was inhibited by co-culture with 373-L1 cells under 10% FBS and DME, DME, GIT and serumless medium, respectively. The conditioned medium of cultured 373-L1 cells under serumless medium was concentrated 100-fold through an ultrafiltration cell with a 10,000 molecular weight cutoff at 4$^{\circ}C$ under positive pressure using nitrogen(373-L1 EM). 373-L1 EM inhibited the growth of HeLa, Hep G 2, KHOS-Np, A43l and MCF-7 cells. 3T3-L1 EM was purified with FPLC, DEAE-ion exchange chromatography and phenyl-sepharose chromatography. The major protein of 373-L1 EM has a molecular weight of 66,000-68,000 in SDS-PAGE analysis. The results suggest that the inhibitory activity of 373-L1 EM appears to be due to some protein(m.w.66,000-68,000) secreted by 373-L1 cells.

• 한국수소및신에너지학회논문집
• /
• 제1권1호
• /
• pp.1-8
• /
• 1989

The hydriding kinetic mechanism and the change of the hydriding reaction rate of $MmNi_{4.5}Al_{0.5}$ during the thermally induced hydrogen absorption-desorption cycling are investigated. Comparison of the reaction rate data which are obtained by the pressure sweep method with the theoretical rate equations suggests that the hydriding rate controlling step has changed from the dissociative chemisorption of hydrogen molecules at the surface to the hydrogen diffusion through the hydride phase with the increase of the hydriding fraction. These hydriding kinetic mechanism is not changed during the cycling. However, the intrinsic hydriding reaction rate of $MmNi_{4.5}Al_{0.5}$ after 5500 cycles increases significantly comparing with the activated one. It is suggested that the change of the hydriding kinetic behavior due to intrinsic degradation of $MmNi_{4.5}Al_{0.5}$ can be interpreted as follows ; the formation of nickel cluster at the surface of the sample and the host metal atom exchange in bulk by thermal cycling.

• Membrane and Water Treatment
• /
• 제4권2호
• /
• pp.109-126
• /
• 2013

Surface modification by low-pressure ammonia ($NH_3$) plasma on commercial thin-film composite (TFC) membranes was investigated in this study. Surface hydrophilicity, total surface free energy, ion exchange capacity (IEC) and zeta (${\zeta}$)-potentials were determined for the TFC membranes. Qualitative and quantitative analyses of the membrane surface chemistry were conducted by attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy. Results showed that the $NH_3$ plasma treatment increased the surface hydrophilicity, in particular at a plasma treatment time longer than 5 min at 50 W of plasma power. Total surface free energy was influenced by the basic polar components introduced by the $NH_3$ plasma, and isoelectric point (IEP) was shifted to higher pH region after the modification. A ten (10) min $NH_3$ plasma treatment at 90 W was found to be adequate for the TFC membrane modification, resulting in a membrane with better characteristics than the TFC membranes without the modification for water treatment. The thin-film chemistry (i.e., fully-aromatic and semi-aromatic nature in the interfacial polymerization) influenced the initial stage of plasma modification.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1083-1090
• /
• 2005

Repeated ribs are used on heat exchange surfaces to promote turbulence and enhance convective heat transfer. Applications include fuel rods of gas-cooled nuclear reactors, inside cavities of turbine blades, and internal surfaces pipes used in heat exchangers. Despite the great number of literature papers, only few experimental data concern detailed distributions of friction factors and heat transfer coefficients in square channels varying the number of rough walls. This issue is tackled by investigating effects of different number of ribbed walls on heat transfer and friction characteristics in square channel. The rough wall have a 45$^{\circ}$ inclined square rib. Uniform heat flux is maintained on whole inner heat transfer channel area. The heat transfer coefficient and friction factor values increase with increasing the number of rough walls.

• 동력기계공학회지
• /
• 제9권1호
• /
• pp.5-13
• /
• 2005

Acoustic emission(AE) is defined as the transient elastic waves thar are generated by the rapid release of energy. The advantage of AE is that very early crack growth can be detected well before a highly stressed component may fail. At present, an exact diagnosis is the most reliable means for determining the soundness of structures during power plant operations. AE monitoring has been applied successfully in power plants to determine mechanical problems, pressure vessel integrity and external valves leaks, vacuum leaks, the onset of cavitation in pumps and valves, the presence of flow(or no flow) in piping and heat exchange equipment, etc. Acoustic emission(AE) technology has recently strengthened its application base, and practitioners' understanding of the technique's fundamentals. This paper introduces the methods of a survey and assessment on AE monitoring applications in nuclear, fossil and hydraulic power plant. The main objective of this paper was to obtain information on various applications of AE technology in power plant.

• 한국환경복원기술학회지
• /
• 제7권1호
• /
• pp.110-115
• /
• 2004

This experiment was conducted to investigate the effect of light intensities on the growth responses, carbohydrate contents and the characteristics of leaf gas exchange in Miscanthus sinensis and Pennisetum purpurascens. The plant height and leaf length were increased to about 30% in the sun. However, those were reduced severely in the shade, and leaf necrosis was also observed. The representative growth index and the dry weight of 2 species were 50% higher than shade and the rate was reduced according to the decrease of light intensities. Total carbohydrate contents showed very similar changes to that of dry weight. However, any notable influences were observed at above the light intensities of 250~500${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in the half shade. The size of spikes and the earliest spiking appeared in the sun and the spike color was decolorized as decreased in light intensities, irrespective of species. Photosynthetic rate of 2 species was 2 times higher in the sun than those in the shade, and it showed the typical photoresponses of sun plant. Stomatal conductances and intercelluar $CO_2$ concetration showed similar changes to that of photosynthetic rate. On the contrary, vapor pressure deficit was increased more in the shade than in the sun.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.20-25
• /
• 1996

Wood chips of oak(Quercus mongolica) and larch(Larix leptolepis) were exploded with the optimum condition. Main components of exploded wood were separated with hot hot water and methanol. The hemicelluloses were purified from hot water extracts and alditol complexs were prepared from purified hemicellulose. And also, cellulose nitrate was prepared from extractive residue and characterized. The results can be summarized as follows. 1. Amounts of carbohydrate(72~79%) in the crude hemicellulose of larch wood was more than those of oak wood(55~66%). 2. The crude hemicelluloses were mainly composed of oligosaccharides in oak wood but those in larch wood contained about 50% monosaccharides. 3. Decolorization of hemicellulose was successful with activated charcoal and ion-exchange resin treatment. The alditol yields were 56.3~82.9%. 4. The degree of substitution(D.S.) of cellulose nitrate was 1.95~2.87 and it showed a good acetone solubility.