• 대한임상검사과학회지
• /
• 제50권3호
• /
• pp.370-374
• /
• 2018

빗장밑혈류빼앗김증후군은 왼쪽 근위부 빗장밑동맥이나 오른쪽 팔머리동맥에 심한 협착 혹은 폐색으로 인해 반대쪽 척추동맥으로부터 관류압이 감소된 병변쪽 빗장밑동맥으로 혈류가 역으로 유입되는 현상이 나타나게 되고, 그 결과로 척추-뇌바닥혈류부전이나 허혈성 말초동맥질환 증상이 동반되는 경우를 말한다. 빗장밑동맥을 포함한 뇌혈관 협착증에서 신경중재술을 이용한 혈류의 회복 및 방향 교정은 환자의 증상과 예후를 좋게 한다고 알려져 있다. 저자는 오른팔에 비해 왼팔 혈압이 12 mmHg 낮은 환자에서 이중초음파검사를 시행하였고, 왼쪽 척추동맥에서 빗장밑혈류빼앗김증후군의 특징적인 혈류파형이 관찰되어 혈관성형술 및 스텐트 설치술을 통해 성공적으로 치료된 증례를 보고하고자 한다. 6개월 후 추적검사에서 왼쪽 척추동맥의 혈류파형은 정상으로 회복되었고, 양팔의 혈압 차는 5 mmHg로 감소하였다.

• Journal of Oral Medicine and Pain
• /
• 제22권2호
• /
• pp.327-339
• /
• 1997

This study aimed at evaluating tile relationship between pressure pain threshold(PPT) and electromyographic(EMG) activity in 30 healthy volunteers and 30 patients with temporomandibular disorders. PPTs were determined with electric pressure algometry over masseter, temporalis anterior, sternocleidomastoid, and trapezius muscle during resting and clenching. To obtain more reliable result, two examiners measured PPTs two times on each muscles, randomly. Resting and clenching EMG activity and tenderness of all muscles were measured to evaluate the relationship with PPTs. The collected data were processed by SAS/STAT program. The obtained results were as follows : 1. Pressure pain thresholds in tendered muscles were lower than those in non-tendered muscles. This tendency was more prominant in masticatory muscles than in cervical muscles and in clenching than in resting. 2. There ware a tendency of higher PPTs in unaffected side than in affected side, but there were no significant difference statistically. 3. There wert no difference of PPTs between in preferred side and in ipsilateral side, significantly. 4. There was a significantly positive correlation between resting and clenching PPTs, but there were no correlation between PPTs and EMG activities. 5. Comparison of EMG activity between in higher group and in lower group by resting PPTs didn't show any significant difference. But resting EMG activity in the higher group of clenching PPTs were lower, on the contrary, clenching activity were higher than those in lower groups of clenching PPTs. From this results, the author concluded that the clenching PPTs was more important than resting PPTs in diagnosis of muscle dysfunction. And the author recommanded that all of three following test were performed for the proper diagnosis and treatment of orofacial Pain : muscle tenderness, EMG activity, and PPT.

• 대한기계학회논문집B
• /
• 제20권9호
• /
• pp.2944-2952
• /
• 1996

In this paper the CSCM type upwind flux difference splitting Navier-Stokes method has been applied to study the ARL-SL19 transoni $c^ersonic compressor cascade flow. First, the general characteristics of baseline cascade flow were analyzed. At freestream Mach n.1.612 and exit/inlet pressure ratio 2.15, the results from current laminar flow were compared well in suction surface with the experiment; however, not well in pressure surface. Second, numerical study of the transoni $c^ersonic compressor cascade flow demonstrated the effectiveness of a passive control by the various size cavities. A cavity under the shock foot point at the suction surface of the blades was used as a passive control. The passive control of shock-boundary layer interaction by a cavity reduced total pressure losses. The effect of cavity length and depth was studied. The total pressure loss was reduced by about 10% and the isentropic efficiency was improved slightly. The effect of cavity depth in current study(d/l = 0.05, 0.02) was not found strong. Further adequate turbulence modeling and TVD schemes would help to capture the shock more accurately and increase the effectiveness of the current shock-boundary layer interaction study using upwind flux difference splitting computational methods.thods.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.88-95
• /
• 2015

The thickness of adsorbed molecular layers is the most critical factor in studying thin-film lubrication, and it is the most essential parameter that distinguishes thin-film from thick-film lubrication analysis. The thin film between the shaft and bearing surface within a very narrow gap was considered. The general Reynolds equation has been derived for calculating thin-film lubrication parameters affecting the performance of the circular journal bearing. Investigation of the load-carrying capacity and pressure distribution for the journal bearing considering the adsorbed layer thickness has been carried out. A Reynolds equation appropriate for the journal bearing is used in this paper for the analysis, and it is discussed using the finite difference method of the central difference scheme. The parameters, such as eccentricity and attitude angle, are used for discussing the load-carrying capacity of the journal bearing. The results reported in this paper should be applied to analysis of the journal bearing with different lubrication factors. The steady-state analysis of the journal bearing is conducted using the Reynolds model under thin-film lubrication conditions. For a journal bearing, several parameters, such as a pressure, load capacity, and pressure components of the bearing can be obtained, and these results can be stored in a sequential data file for later analysis. Finally, their distribution can be displayed and analyzed easily by using the MATLAB GUI technique. The load-carrying capability of the journal bearing is observed for the specified operating conditions. This work could be helpful for the understanding and research of the mechanism of thin-film lubrication.

• 대한간호학회지
• /
• 제40권5호
• /
• pp.705-713
• /
• 2010

Purpose: To investigate the effectiveness of aromatherapy on blood pressure, heart rate variability, aortic pulse wave velocity and the aortic augmentation index of essential hypertensive patients. Methods: Using a coin toss, 22 participants were assigned to the experimental group and 20 to the control. The experimental group was given a blend of oils of lemon (Citrus limonum), lavender (Lavandula angustifolia), and ylang ylang (Cananga odorata) which were prepared in the ratio of 2:2:1, respectively. The control group was given an artificial lemon fragrance of Limonene (35 cc) and Citral (15 cc) mixture. The experiment, inhalation, was conducted for 3 weeks (2 min per inhalation, 2 times per day) to both groups. Results: There was a noticeable difference in systolic blood pressure between the groups (p=.001), however the difference in diastolic blood pressure between the two groups was not significant. There was a notable difference in sympathetic nerve system activity of heart rate variability (p=.047). However, the differences in aortic pulse wave velocity or the aortic augmentation index were not significant. Conclusion: Aromatherapy is effective in lowering systolic blood pressure and sympathetic nerve system activity.

• 전기화학회지
• /
• 제6권1호
• /
• pp.48-52
• /
• 2003

일반적으로 연료전지 제어의 주목표는 연료와 공기의 반응이 원활하게 이루어져 출력을 연속적이고 안정되게 얻어지도록 공정설비를 제어함에 있다 연료전지의 과부하에 따른 성능저하 및 급격한 유량증가에 따른 양극간의 압력차로 인한 전극손상이 발생하지 않도록 하기 위해, 연료전지의 제어조건을 고려한 동적모델링이 필요하다. 전극간 압력차이를 허용범위 이하로 유지하며 급격한 부하요구가 발생하더라도 부하에 적합한 이용율 이상으로 부하가 걸리지 않도록 공기이용률 제어를 이용하였다. 10kW고분자 연료전지(PEMFC)의 전산모사를 통해 모델의 타당성을 검토하였고 제어성능을 수행하여 1초 내의 부하추종성능을 얻을 수 있었으며, 0.01atm내의 양극간 압력차를 유지시킬 수 있었다.

• 대한정형도수물리치료학회지
• /
• 제9권2호
• /
• pp.47-58
• /
• 2003

To closely examine the effects of the massage treatment as one method of curing hypertension by exploring the effects that one-time circulation-centered massage has on a hypertensive's blood pressure, this study selected as the subject ten among fifty-year-old essential hypertensives visiting N clinic, and measured and compared their blood pressures before and after I gave them massage. After stabilizing them, I measured their blood pressures. In their prone and supine postures, I gave them rubbing massage for twenty minutes from positions proximal to their hearts to ones distal from their hearts to help their artery circulation and circulation-centered stroking massage for ten minutes from positions distal from their hearts to ones proximal to their hearts to help their vein circulation. After the massage, I had them rest for five minutes and measured their blood pressures. Regarding each item analyzed, I calculated the mean and standard deviation before and after the massage. The difference before and after the massage was tested by corresponding t-test and the level of significance was made p<0.05. The findings are as follows. First, systolic pressure was $157.70{\pm}7.48$ before the massage and $143.00{\pm}9.39$, which is less than before the massage, after the massage, showing statistically significant difference (p<.05). Secondly, diastolic pressure was $97.80{\pm}6.56$before the massage and $95.20{\pm}5.18$, which is less than before the massage, after the massage, not showing statistically significant difference (p<.05).

• 한국화재소방학회논문지
• /
• 제30권5호
• /
• pp.87-92
• /
• 2016

국내에서는 고층 및 복합 건축물이 다수 시공되고 있는 상황에서 화재시 실효성 있는 연기대응 기술의 확립이 요구되고 있으며, 고층 건축물에서 제연설비에 대한 대안으로서 샌드위치 가압을 이용하는 연기제어 시스템의 적용이 확대되고 있다. 샌드위치 가압을 이용하는 연기제어 시스템은 연기확산 방지와 원할한 피난환경 제공을 위해서 적정 층간차압과 이를 위한 급배기 풍량의 설계에 관한 자료가 확보되어야 한다. 본 논문에서는 이러한 연구의 일환으로서 샌드위치 가압을 이용하는 연기제어 시스템이 설치된 실제 건축물에서 수행한 현장실험의 과정과 결과를 제시하였다. 실험에서 화재층의 배기풍량과 상하부층의 급기풍량으로 시간당 6회의 환기횟수를 적용하였으며, 시스템 가동으로 화재층인 12층과 그 상부층인 13층 사이에 약 260 Pa의 압력차가 형성되었다. 이러한 압력차 형성은 피난 및 방화구획에 상당한 영향을 미치므로 이에 대한 추가적인 연구가 필요하다.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.39-44
• /
• 2019

The evaporator is a key driver of an air conditioning system's efficiency. In this study, we study methods of maximizing the efficiency of a Massey Ferguson (MF) evaporator by measuring how the cooling performance of different shapes vary with temperature. We varied the tube insertion depth as well as the shape of the evaporator's header and tube. When we compare header shapes of "D", "Ellipse", and "Quadrangle" types, we find that the elliptical header creates the smallest pressure loss and the highest temperature difference. Between tube shapes of "Rectangular", "Projection", and "Circular" types, the "Projection" type tube creates the most temperature difference. We also investigated the depth of tube insertion in the header and find that tube insertion of 5 - 10 mm is feasible; we selected the depths of 5, 7, and 10 mm since they corresponded to approximately 30%, 50%, and 70% of the total width of the header. The tube insertion test demonstrated that a tube insertion depth of 7 mm creates the least pressure loss and the highest temperature difference. In conclusion, the optimal evaporator design uses an "Ellipse" type header, "Projection" type tube, and a tube insertion depth between 30 and 50% of the header width.

• 유변학
• /
• 제11권1호
• /
• pp.1-8
• /
• 1999

본 논문은 높은 압력차의 유동모드 하에서의 정상전단거동을 고찰하였다. ER유체 조성에 사용된 비전도성 용매는 10cS의 점도를 갖는 트랜스포머 오일이 사용되었으며, 전도성 입자의 중량비를 20 wt%와 30 wt%로 조절하여 입자 중량비에 대한 영향을 고찰하였다. 두 가지로 조성된 수계 ER유체를 ERF 1과 ERF 2로 칭하였으며, 성능 비교를 위하여 외국의 우수하다고 알려진 비수계 ER유체인 ERF 3를 사용한 실험도 실시하였다. 높은 압력차의 유동모드를 발생시키기 위해, 양방향 유압 실린더를 이용하여 고압의 질소 가스로 작동되는 실험 장치를 자체 제작하였다. 전극 앞에 장착된 압력 센서를 통해 전극 양단의 압력차를 구하고, 실린더 로드에 부착된 변위센서로부터 측정한 피스톤 속도를 유량 계산의 기초 자료로 사용하였다. 유동모드에 대한 유체역학적 해석을 통해 유도된 수식을 인용했으며, 위의 기초 자료와 수식을 이용하여 유동모드형 응용 장치에 적용하기 위한 전단변형률에 대한 전단응력의 결과를 도출하였다.