• 소성∙가공
• /
• 제25권1호
• /
• pp.29-35
• /
• 2016

In the current study, finite element analysis was conducted for the press hemming of automotive panels in order to predict various hemming defects such as roll-in and turn down. The analysis used the exact punch movement based on the cam location and considered the sealer between the inner and outer panels with an artificial contact thickness. The analysis results quantify the hemming defects especially at the flange edge in the matching region of the head lamp. A design of experiments along with the parameter study was used to obtain the optimum process parameters for minimizing hemming defects. The optimization process selects the intake angle, bending angle of the hemming punch, and the flange height of the outer panel. The optimum design process determines an appropriate tool angle and flange height to reduce the roll-in and turn-down as compared to the initial design.

• 소성∙가공
• /
• 제9권6호
• /
• pp.624-630
• /
• 2000

Typical automotive opening parts, i. e. hood trunk lid and door, are made through the press operations such as drawing, trimming, flanging, and hemming. The dimensional accuracy of stamped panels is mainly dependent on the drawing operation. However, the gap between outer panels and opening parts, which is important to the appearance quality of the assembled body, is directly influenced by the flanging and hemming operation. In this study, the relation between the design parameters of the hemming operation and the defect of roll-in is shown. The effects of some design parameters on the gap are examined using CAE. furthermore, the simulated results of the hemmed part of tailgate comer are shown and discussed.

• 소성∙가공
• /
• 제24권6호
• /
• pp.400-404
• /
• 2015

For mass production of stamped parts, which require complicated in-press operations, it is always advisable to use a progressive die set. It is difficult to choose a progressive die set if the stamped parts need to be deep drawn and especially if they are unsymmetrical. Because unsymmetrical deep drawing parts are very sensitive to the effect of weight during moving to the next step, they are hard to exactly locate on the die face. An automotive seat side cushion panel is about 80mm high, unsymmetrical and its low edge needs hemming, so it is hard to produce even using a progressive die set. In the current paper a progressive stamping for seat side cushion panel was examined. Five strip bridges were considered to be strong enough to move to the next die as predicted by the CAE analysis.