• Journal of Advanced Marine Engineering and Technology
• /
• 제31권7호
• /
• pp.833-841
• /
• 2007

The aim of this paper is to analyze the conjugate problems of heat conduction in solid walls coupled with laminar free convection flow adjacent to a vertical flat plate under boundary layer approximation. Using the similarity transformations the governing boundary layer equations for momentum and energy are reduced to a system of partial differential equations and then solved numerically using Finite Difference Method(FDM) known as the Keller-box scheme. Computed solutions to the governing equations are obtained for a wide range of non-dimensional parameters that are present in this problem, namely the coupling parameter P. the Prandtl number Pr and the heat generation parameter Q. The variations of the local heat transfer rate as well as the interface temperature and the friction along the plate and typical velocity and temperature profiles in the boundary layer are shown graphically. Numerical solutions have been consider for the Prandtl number Pr=0.70

• 오토저널
• /
• 제6권1호
• /
• pp.36-45
• /
• 1984

The conventional heat transfer analysis methods based on the one-dimensional theory are not adequate to be applied for the purpose of finned surface design because the two-dimensional effects in fact are induced within the supporting wall by the presence of the finnes. In this study, the two-dimensional heat transfer of a straight fin assembly is analyzed by using the integral method. It is shown that all the effects of the system parameters i.e., the heat transfer parameters and geometrical parameters, on both the total heat transfer rate and the surface temperature effectiveness can be seen from the present analysis. The optimum combinations of these parameters for the design of finned surfaces may be estimated.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.235-249
• /
• 1995

This study was designed to identify the lymphocytes present and to examine the relation between lymphocytes population and clinical symptoms of the pulps clinically diagnosed as normal and irreversible pulpitis. We recorded the history and severity of the pain and performed several clinical tests, before extirpation of vital, irreversibly inflamed pulps in routine endodontic treatment. Then the teeth were divided into two groups. Five teeth, categorized in acute symptom group, had severe spontaneous pain, particularly at night and were extremely sensitive to cold and heat. The other 15 teeth with history of mild to moderate pain and with or without cold or heat responses were categorized as chronic symptom group. Inflamed pulps were also classified into 8 minor groups by presence or absence of signs or symptoms related to the involved teeth, including the presence of pain on percussion, pain on heat and cold stimuli and the periodontal pocket depth. All extirpated pulps were immediately immersed in ultra low-temperature freezer($-74^{\circ}C$), and they were sectioned $6{\mu}m$ in thickness. Specimens were stained using three-stage indirect immunoperoxidase techniques(DAKO, LSAB kit) and monoclonal antibodies for detecting the presence of T lymphocytes(T), B lymphocytes(B) and helper(T4) and suppressor(T8) lymphocytes. Following results were obtained; 1. All the examined normal and inflamed pull) tissues had positive staining for T lymphocytes and T helper and T suppressor cells. But B cells were observed only in inflamed pulp. 2. Statistically more T and B cells were observed in acute symptom group as compared with chronic symptom group(p<0.05). 3. Cell ratio of BIT in acute symptom group were significantly higher than that of chronic symptom group(p<0.05). 4. Only B cells were significantly increased in the percussion positive group than the number of B cells in percussion negative group(p<0.05). 5. No differences were observed in the number of different cell types among other minor groups.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.999-1008
• /
• 2014

채널 내 회전하는 원형 실린더가 주기적으로 존재하는 경우 회전하는 실린더를 지나는 유동에 의한 채널 내 유동 특성 및 채널 벽에서의 열전달 효율증진을 파악하였다. 본 연구에서 사용된 유동 모델은 마이크로 채널, 열교환기 등에서 평판 사이의 열전달 효율을 높이기 위해 흔히 사용되는 와류 생성기의 가장 단순한 모델이다. 실린더와 채널 벽과의 간격 및 Re 수를 변화해가며 수치적 해석을 수행하였으며, 직교좌표계에서 채널 내 원형 실린더를 구현하기 위해 가상경계법이 적용 되었다. 채널 내 실린더가 회전하고 있는 경우, 실린더가 정지해 있는 경우에 비해 특히 실린더와 채널 벽과의 간격이 작아질수록 채널 벽에서의 열전달 효과는 더 높은 것으로 파악되었다.

• 한국해안·해양공학회논문집
• /
• 제20권1호
• /
• pp.62-72
• /
• 2008

본 연구에서는 흐름에 수직한 방향으로 급격한 수심 변화가 존재하는 해역에서 점열원에 의한 열오염 분포를 예측할 수 있는 해석 모델을 개발하였다. 개발된 모델을 이용하여 열오염 분포에 있어 수심 변화와 흐름효과를 검토하였다. 계산 결과 흐름에 수직한 방향으로 수심 변화가 존재할 경우 수평 확산 플럭스의 증감으로 인해 수심 변화 경계를 가로지르는 열의 이동이 증가하거나 감소하는 것으로 나타났다. 조류와 동시에 잔차류 성분을 포함할 경우에는 이류에 의한 열오염 수송 효과가 증가하여 수심 변화 경계를 가로지르는 수평 확산은 상대적으로 감소하였다.

• 비파괴검사학회지
• /
• 제10권2호
• /
• pp.50-55
• /
• 1990

Flaws in GFRP(Glass Fiber Reinforced Plastics) were thermally detected using cholesteric liquid crystals. Presence of flaws changes the thermal conductivity of GFRP, and disturbs heat flow. When a uniform heat source is applied, the surface temperature of flawed region is different from that of sound region. The surface temperature distributions were measured by thermo-optic properties of liquid crystal. Since the colors of liquid crystal indicate temperature distribution of GFRP surface, the thermal disturbance by flaws could be detected. The locations of flaws in GFRP could be determined from the distribution of liquid crystal colors.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.842-848
• /
• 2022

Parametric studies of heat transfer and fluid flow are very important research of interest because the design and operation of fluid flow and heat transfer systems are guided by these parametric studies. The safety of the system operation and system optimization can be determined by decreasing or increasing particular fluid flow and heat transfer parameter while keeping other parameters constant. The parameters that can be varied in order to determine safe and optimized system include system pressure, mass flow rate, heat flux and coolant inlet temperature among other parameters. The fluid flow and heat transfer systems can also be enhanced by the presence of or without the presence of particular effects including gravity effect among others. The advanced Generation IV reactors to be deployed for large electricity production, have proven to be more thermally efficient (approximately 45% thermal efficiency) than the current light water reactors with a thermal efficiency of approximately 33 ℃. SCWR is one of the Generation IV reactors intended for electricity generation. High Performance Light Water Reactor (HPLWR) is a SCWR type which is under consideration in this study. One-eighth of a proposed fuel assembly design for HPLWR consisting of 7 fuel/rod bundles with 9 coolant sub-channels was the geometry considered in this study to examine the effects of system pressure and mass flow rate on wall and fluid temperatures. Gravity effect on wall and fluid temperatures were also examined on this one-eighth fuel assembly geometry. Computational Fluid Dynamics (CFD) code, STAR-CCM+, was used to obtain the results of the numerical simulations. Based on the parametric analysis carried out, sub-channel 4 performed better in terms of heat transfer because temperatures predicted in sub-channel 9 (corner subchannel) were higher than the ones obtained in sub-channel 4 (central sub-channel). The influence of system mass flow rate, pressure and gravity seem similar in both sub-channels 4 and 9 with temperature distributions higher in sub-channel 9 than in sub-channel 4. In most of the cases considered, temperature distributions (for both fluid and wall) obtained at 25 MPa are higher than those obtained at 23 MPa, temperature distributions obtained at 601.2 kg/h are higher than those obtained at 561.2 kg/h, and temperature distributions obtained without gravity effect are higher than those obtained with gravity effect. The results show that effects of system pressure, mass flowrate and gravity on fluid flow and heat transfer are significant and therefore parametric studies need to be performed to determine safe and optimum operating conditions of fluid flow and heat transfer systems.

• Structural Engineering and Mechanics
• /
• 제68권2호
• /
• pp.215-226
• /
• 2018

In this article, the theory of fractional order two temperature generalized thermoelasticity is employed to study the wave propagation in a fiber reinforced anisotropic thermoelastic half space in the presence of moving internal heat source. The whole space is assumed to be under the influence of gravity. The surface of the half-space is subjected to an inclined load. Laplace and Fourier transform techniques are employed to solve the problem. Expressions for different field variables in the physical domain are derived by the application of numerical inversion technique. Physical fields are presented graphically to study the effects of gravity and heat source. Effects of time, reinforcement, fractional parameter and inclination of load have also been reported. Results of some earlier workers have been deduced from the present analysis.

• 에너지공학
• /
• 제13권2호
• /
• pp.152-160
• /
• 2004

The present study investigates on the experimental and numerical results of heat transfer in the acoustic fields induced by ultrasonic waves. The strong upwards flow which moves from the bottom surface in a cavity to the free surface called as "acoustic streaming" was visualized by a particle image velocimetry (PIV). In addition, the augmentation ratio of heat transfer was experimentally investigated in the presence of acoustic streaming and was compared with the profiles of acoustic pressure calculated by the numerical analysis. A coupled finite element-boundary element method (FE-BEM) was applied for a numerical analysis. The results of experimental and numerical studies clearly show that acoustic pressure variations caused by ultrasonic waves in a medium are closely related to the augmentation of heat transfer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1603-1608
• /
• 2003

The Present Study reported on the experimental and numerical results of heat transfer in the acoustic fields induced by ultrasonic waves. The strong upwards flow called as acoustic streaming was visualized by a particle image velocimetry (P.I.V). in addition, the augmentation of heat transfer was experimentally investigated in the presence of acoustic streaming and was compared with the profiles of acoustic pressure calculated by the numerical analysis. Experimental and numerical studies clearly show that acoustic pressure variations are closely related to the augmentation of heat transfer.