• 생약학회지
• /
• 제39권4호
• /
• pp.316-323
• /
• 2008

In this study, we have investigated the HPLC analysis methods and quantitative analysis of standard compounds for quality standardization of a medicinal crude drug GCSB-5, a herbal formulation consisting of 6 medicinal plants (Acanthopanacis Cortex, Achyranthis Radix, Ledebouriellae Radix, Cibotii Rhizoma, Glycine Semen, Eucommiae Cortex) which are used in traditional medicine to treat various bone disorders. HPLC analysis methods of acanthoside D(Acanthopanacis Cortex), 20-hydroxyecdysone(Achyranthis Radix) which were known standard compounds among 6 medicinal plants were developed on crude material and product. And validation of HPLC analysis methods were conformed for verification of HPLC methods by check to specificity, linearity, intra-day precision, inter-day precision and accuracy following ICH guideline. Content of acanthoside D and 20-hydroxyecdysone on raw material of GCSB-5 were decided at 0.577-0.578 mg/g and 0.311-0.312 mg/g. And we confirmed that content of acanthoside D and 20-hydroxyecdysone on GCSB-5 preparation were 0.302-0.303 mg/capsule and 0.113-0.115 mg/capsule.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.391-398
• /
• 2000

The index properties of cohesive soils play an important role to examine entire tendency of soil properties. Especially, the Atterberg limits have a good correlation with compression and shear strength of cohesive soils. However, these values strongly depend on their testing methods. In this study, for Pusan clays the Atterberg limits were peformed under different conditions; for example, four kinds of specimen preparation, two kinds of testing equipment, and four kinds of estimating method. And a laboratory vane test was peformed to compare the undrained shear strength with that of the fall cone test. As experimental results, the value of liquid limit performed for oven-dried sample, followed in ASTM D4318, underestimated by about 10% compared to those of another three methods, irrespective to the used equipments. But the value of plastic limit was not influenced by sample preparation methods and equipments. The liquid limits by one-point methods(Leroueil et al., 1996; Nagaraj et al., 1981) were agreed well with those of different methods. Finally, the undrained shear strength by laboratory vane test was relatively larger than that of fall cone test, and the relationship between both showed a bad trend.

• 한국식생활문화학회지
• /
• 제24권1호
• /
• pp.39-50
• /
• 2009

The principal objective of this study was to evaluate the sanitary management status of chlorine sterilization methods used for raw fruits in a school foodservice, and to suggest basic data for sanitary improvements in the quality of raw fruits. A questionnaire form predicated on HACCP standards was developed and utilized for self-reported evaluations of dietitians regarding their sanitary management practices. The subjects consisted of 257 dietitians that were employed in school (elementary middle high school) foodservices. The collected data were analyzed with the SAS package. According to the results of this study, it was deemed necessary that optimized sterilization and washing methods for good microbiological safety and quality of strawberries and bananas in school foodservice should be determined. Some strategies for future improvement were also suggested. They included the following: (1) Improvement of policy for assuring the quality of raw fruits by designing some sanitation standards and specifications for raw fruits; (2) Strengthening the research and accumulation of background data regarding methods for the sanitation of raw fruits; (3) Enforced improvement of personal hygiene for dietitians and employees; (4) Use of a variety of methods in sanitary education and employee training.

• 생약학회지
• /
• 제41권1호
• /
• pp.48-53
• /
• 2010

GCSB-5 preparation is a purified extract from a mixture of 6 medicinal plants(Acanthopanacis Cortex, Achyranthis Radix, Saposhnikoviae Radix, Cibotii Rhizoma, Glycine Semen Nigra, Eucommiae Cortex) that have been widely used for the treatment of various bone disorders. The aim of this study was to investigate HPLC analysis method and screening of standard compound on Cibotii Rhizoma for quality standardization of a medicinal crude drug GCSB-5. Onitin-4-O-$\beta$-D-glucopyranoside was isolated from Cibotii Rhizoma as the standard compound and identified on the basis of spectroscopic data such as NMR. HPLC analysis method for the determination of onitin-4-O-$\beta$-D-glucopyranoside was established for the quality control of the medicinal plants of Cibotii Rhizoma species, GCSB-5 raw material and GCSB-5 preparation. And validation of HPLC analysis methods were conformed for verification of HPLC methods by check to specificity, linearity, intra-day precision, inter-day precision and accuracy following ICH guideline.

• 폴리머
• /
• 제34권3호
• /
• pp.261-268
• /
• 2010

본 연구에서는 상전이 온도가 36 $^{\circ}C$인 n-eicosnae을 열가소성 폴리올레핀 고분자인 폴리프로필렌과 블렌드하였으며, 또한 최근의 형태안정성 PCM(SSPCM)의 연구검토를 통하여 폴리프로필렌과 n-eicosnae의 특성과 잠열저장체로서의 적용 가능성을 확인하였다. 상전이 온도가 36 $^{\circ}C$인 n-eicosane과 폴리프로필렌을 멜팅방법과 흡수방법을 이용하여 시료를 제조하였다. 제조된 형태안정성 PCM(SSPCM)을 DSC, WAXD, FTIR spectroscopy, ARES로 분석결과 형태안정성, 열용량의 향상을 확인하였다.

• Journal of Pharmaceutical Investigation
• /
• 제31권4호
• /
• pp.257-263
• /
• 2001

The microspheres have been developed as a new drug delivery system. Although many particulate drug carriers, such as liposome, niosome and emulsion, have been introduced, injectable and biodegradable microspheres appears to be a particularly ideal delivery system because the local anesthesia is not necessary for the insertion of large implants and for the removal of the device after the drug release is finished. Biodegradable microspheres with nicotine and triamcinolone acetonide are prepared and evaluated. As biodegradible polymers, PLA (M.W. 15,000, PLA-0015), PLGA (M.W. 17,000, RG 502) and PLGA (M.W. 8,600, RG 502H) are used. This study attempted to prepare and evaluate the nicotine and triamcinolone acetonide-incorporated microspheres, which were prepared by two methods, solvent-evaporation and spray-drying methods. The microspheres, as a disperse system for injections, were evaluated by particle size, size distribution, entrapment efficiency, and in vitro drug release patterns. The differences of preparation method, partition coefficient, types of polymer, and preparation conditions of microspheres influence the particle size, entrapment efficiency, and in vitro drug release patterns.

• Applied Microscopy
• /
• 제25권1호
• /
• pp.130-138
• /
• 1995

TEM specimen preparation methods have been examined to characterize Cu oxide particles in the polyimide film. Polyimide films were prepared by coating polyamic acid onto Cu films which had been deposited on TEM-mask and glass substrates and Cu foil, followed by thermal curing. In case of TEM-mask, direct observation was possible without further preparation. In other cases, TEM specimen were made by separating polyimide film from the substrate. Polyimide films were removed from glass and Cu foil by dissolving glass in HF solution and Cu foil in $H_{2}SO_{4}$ solution. TEM-mask observation confirms that fine $Cu_{2}O$ particles precipitate in the polyimide as a result of reaction of polyamic acid with Cu. However $Cu_{2}O$ particle reacts with HF and $H_{2}SO_{4}$ solution during dissolving the substrate and interpretation could be misled. It is concluded characterization of $Cu_{2}O$ particle in polyimide using TEM-mask is better than other methods.

• Fisheries and Aquatic Sciences
• /
• 제1권2호
• /
• pp.187-191
• /
• 1998

Chemotherapy can not be applied for the control of fish viral diseases because viruses depend on host machinery for their replication. Although new control strategies including vaccination are under development, avoidance of virus introduction by rapid and correct diagnosis is the best way of fish viral disease control. Although observation of virus particles with an electron microscope is an easy method for virus detection, it take a few days for the sample preparation. In order to shorten the sample preparation time, microwave radiation was applied in the procedure. With this method, 15 seconds was enough for fixation of virus infected fish samples or cultured cells inoculated with infectious hematopoietic necrosis virus, which takes 2-4 hours with routine methods. Also four minutes was enough for polymerization of embedding resin which takes 24-48 hours with routine methods. Samples prepared with microwave were good enough for direct electron microscopic observation and immunogold labeling assay.

• Steel and Composite Structures
• /
• 제32권5호
• /
• pp.559-569
• /
• 2019

The bond strength between composite laminates and concrete is a key factor that controls the behavior of concrete members strengthened with fiber reinforced polymer (FRP) sheets, which can be affected by several parameters such as thermal stresses and surface preparation. This article presents the result of an experimental study on the bond strength between FRP sheets and concrete at ambient temperature after specimens had been exposed to elevated temperatures of up to $200^{\circ}C$. For this purpose, 30 specimens of plain concrete with dimensions of $150{\times}150{\times}350mm$ were prepared. Three different conventional surface preparation methods (sandblasting, wire brushing and hole drilling) were considered and compared with a new efficient method (fiber implantation). Deformation field during each experiment was monitored using particle image velocimetry. The results showed that, the specimens which were prepared by conventional surface preparation methods, preserved their bond integrity when exposed to temperature below glass transition temperature of epoxy resin (about $60^{\circ}C$). Beyond this temperature, the bond strength and stiffness decreased significantly (about 50%) in comparison with control specimens. However, the specimens prepared by the proposed method displayed higher bond strengths of up to 32% and 90% at $25^{\circ}C$ and $200^{\circ}C$, respectively.

• 아태비즈니스연구
• /
• 제11권1호
• /
• pp.167-183
• /
• 2020

Purpose - The purpose of this study is to achieve effective system improvement and operation methods for the improvements on the ability of firms'preparation of the financial statements Design/methodology/approach - This study conducts a survey of not only the accounting staff but also accounting specialist such as CPA or CTA. Findings - For the improvements on the ability of firms'preparation of the financial statements, comprehensive improvement in accounting education is needed as follows. First, the focus of accounting education should be converted to the consolidated financial statements, case study and analysis of accounting standards. Second, Financial Supervisory Service and Korea Accounting Institute in cooperation with accountancy firm need to create an accounting education program. Third, the focus of accounting education should be converted to consumer oriented education by providing accounting knowledge with various methods of teaching. Fourth, this study suggests the creation of the committee on Accounting Education. Research implications or Originality - As a result of the incorrect practice of firms'relying on auditors to prepare the financial statements, social concerns about the reliability of accounting information are raised because the incorrect practice decreases the auditor's independence and weaken the auditor's ability to verify accounting information. Therefore, this study analyzes the current status of auditors'preparation of the financial statements.