• Journal of Pharmacopuncture
• /
• v.22 no.4
• /
• pp.260-268
• /
• 2019

Objectives: The Clinical Decision Support System (CDSS), which analyzes and uses electronic health records (EHR) for medical care, pursues patient-centered medical care. It is necessary to establish the CDSS in Korean medical services for objectification and standardization. For this purpose, analyses were performed on the points to be followed for CDSS implementation with a focus on herbal medicine prescription. Methods: To establish the CDSS in the prescription of Traditional Korean Medicine, the current prescription practices of Traditional Korean Medicine doctors were analyzed. We also analyzed whether the prescription support function of the electronic chart was implemented. A questionnaire survey was conducted querying Traditional Korean Medicine doctors working at Traditional Korean Medicine clinics and hospitals, to investigate their desired CDSS functions, and their perceived effects on herbal medicine prescription. The implementation of the CDSS among the audit software developers used by the Korean medical doctors was examined. Results: On average, 41.2% of Traditional Korean Medicine doctors working in Traditional Korean Medicine clinics manipulated 1 to 4 herbs, and 31.2% adjusted 4 to 7 herbs. On average, 52.5% of Traditional Korean Medicine doctors working in Traditional Korean Medicine hospitals adjusted 1 to 4 herbs, and 35.5% adjusted 4 to 7 herbs. Questioning the desired prescription support function in the electronic medical record system, the Traditional Korean Medicine doctors working at Korean medicine clinics desired information on 'medicine name, meridian entry, flavor of medicinals, nature of medicinals, efficacy,' 'herb combination information' and 'search engine by efficacy of prescription.' The doctors also desired compounding contraindications (eighteen antagonisms, nineteen incompatibilities) and other contraindicatory prescriptions, 'medicine information' and 'prescription analysis information through basic constitution analyses.' The implementation of prescription support function varied by clinics and hospitals. Conclusion: In order to implement and utilize the CDSS in a medical service, clinical information must be generated and managed in a standardized form. For this purpose, standardization of terminology, coding of prescriptions using a combination of herbal medicines, and unification such as the preparation method and the weights and measures should be integrated.

• Journal of the Korean Institute of Gas
• /
• v.14 no.2
• /
• pp.7-14
• /
• 2010

Synthesis gas was produced by the partial oxidation of methane. For the preparation of catalysts, Ni, known to be active in this reaction and cheap, was used as the active component and $CeO_2$, having high oxygen storage capability and high redox ability, was used as the support. The catalysts were prepared by the impregnation and urea methods. The catalyst prepared by the urea method showed about 11 times higher surface area and finer particle size than that prepared by the impregnation method. The catalysts prepared by the urea method showed higher methane conversion and synthesis gas selectivity than that prepared by the impregnation method. In this reaction, carbon deposition is a problem to be solved, so La was added to the catalyst system to reduce the carbon deposition. TGA analysis results showed that there was 2% carbon deposition with La-added catalysts and 16% with La-free catalysts. It was found that the addition of La decreases the amount of carbon deposition and prevents catalyst deactivation.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.801-806
• /
• 2002

The decomposition and/or conversion of carbon dioxide to carbon have been studied using oxygen-deficient ferrites for the reduction of $CO_2$ emission to the atmosphere. In this work, the homogeneous precipitation method using urea decomposition was employed to induce in situ precipitation of Ni ferrite($Ni_{0.4}Fe_{2.6}O_4$) on the porous ceramic fiber support (50 mm diameter${\times}$10 mm thickness). Effects of ferrite loading conditions on the CO2 decomposition efficiency were discussed in this paper. Removal of residual chloride ions and urea by solvent exchange from the porous media after ferrite deposition apparently helps to form spinel ferrite, but does not increase the efficiency of $CO_2$ decomposition. Porous ceramic fiber composites containing 20 wt% (1g) ferrite samples showed 100% efficiency for $CO_2$decomposition during the first three minutes, but the efficiency decreased rapidly after the elapsed time of ten minutes. The characteristic reduction time for the $CO_2$ decomposition efficiency was estimated as about 3∼7 min.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.143-166
• /
• 1999

The success of porcelain laminate veneer depends on the bond strength between tooth structure and ceramic restoration and the design of tooth preparation. In particular, incisal coverage and incisal finish line are the two most important factors in long-term fracture resistance. Although the majority of clinicians are practicing incisal coverage and there are various opinions on the geo-metrical ratio between the clinical crown length of the remaining tooth structure and the length of incisal extension in porcelain laminate veneer and the optimal incisal finish lines. scientific evidence still loaves much to be desired. The purpose of this study was to determine the effects of the amounts of incisal coverage and the types of incisal finish line on the stress distribution in maxillary anterior porcelain laminate veneers under two different loading conditions. Three-dimensional finite element models of a maxillary anterior porcelain veneer with differ-ent amounts of incisal coverage ; 0, 1, 2, and 3mm and different incisal finish lines feathered edge, incisal bevel, reverse bevel and lingual chamfer with various amounts of lingual extension were developed. 300N force was applied at the point 0.5mm cervical of the linguoincisal edge in two loading conditions ; A) 125 degrees, B) 132 degrees. Tensile and compressive stress in ceramic and shear stress in the resin cement layer were analyzed using three-dimensional finite element method. The results were as follows : 1. The types of incisal finish line had more influence on the stress distribution in porcelain laminate veneer than the amounts of incisal coverage. 2. In case of no incisal coverage, incisal beveled laminate exhibited more evenly distributed tensile stress than feathered edged laminate. And in case of incisal coverage, reverse beveled laminate and lingual chamfered laminate with 1mm lingual extension exhibited more evenly distributed tensile stress than lingual chamfered laminates with 2mm and 3mm lingual extension. 3. As long as the lingual chamfer goes, less tensile stress was found at the incisal edge, while much more tensile stress was found at the lingual margin area in proportion to the length of lingual extension. 4. Under 125 degree load, tensile stress in porcelain laminate veneer had increased compared with that under 132 degree load and the difference exhibited by the change of the amount of tooth support was larger. 5. The types of incisal finish line and the distance from the incisal finish line to the loading point had more influence on the shear stress distribution in the resin cement layer than the amounts of incisal coverage. In contrast loading condition had little influence.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.31-47
• /
• 2019

This study analyzes the emotional labor experiences of 8 social workers in social welfare facilities and public institutions by thematic analysis method with interveiws with them. Six categories and Twenty two themes concerning the emotional labor experience were derived from the analysis. Six categories are as follows: 'work life as a target for anger', 'unsafe workplace', 'emotional labor that ruins life', 'overcoming hurt emotion', and 'living with emotional labor'. Social workers are constantly required to perform emotional labor providing services to clients in the field of practice, and they also suffer verbal abuse from clients. Social workers feel the pressure of work in the environment that does not tolerate mistakes and they must keep their safety on their own. In these cases, emotional labor has effects on the physical and mental health of workers. The problem of emotional labor is difficult to solve and there might not be no choice but to endure. This study suggests practical and policy measures for social workers based on the results of the analysis. Policy suggestions are as follows: safety assurance for social workers, establishment of base facilities for employee support, human rights education for employees, preparation of super vision system, and the provision of a mental health care system.

• Clean Technology
• /
• v.24 no.4
• /
• pp.371-379
• /
• 2018

The objective of this study is to develop a platinum/hexaaluminate pellet catalyst for the decomposition of eco-friendly liquid propellant. Pellet catalysts using hexaaluminate prepared by ultrasonic spray pyrolysis as a support and platinum as an active metal were prepared by two methods. In the case of the pellet catalyst formed by loading the platinum precursor onto the hexaaluminate powder and then adding the binder (M1 method catalyst), the mesopores were well developed in the catalyst after calcination at $550^{\circ}C$. However, when this catalyst was calcined at $1,200^{\circ}C$, the mesopores almost collapsed and only a few macropores existed. On the other hand, in the case of a catalyst in which platinum was supported on pellets after the pellet was produced by extrusion of hexaaluminate (M2 method catalyst), the surface area and the mesopores were well maintained even after calcination at $1,200^{\circ}C$. Also, the catalyst prepared by the M2 method showed better heat resistance in terms of platinum dispersion. The effects of preparation method and calcination temperature of Pt/hexaaluminate pellet catalysts on the decomposition of liquid propellant composed mainly of ammonium dinitramide (ADN) or hydroxyl ammonium nitrate (HAN) were investigated. It was confirmed that the decomposition onset temperature during the decomposition of ADN- or HAN- based liquid propellant could be reduced significantly by using Pt/hexaaluminate pellet catalysts. Especially, in the case of the catalyst prepared by the M2 method, the decomposition onset temperature did not show a large change even when the calcination temperature was raised at $1,200^{\circ}C$. Therefore, it was confirmed that Pt/ hexaaluminate pellet catalyst prepared by M2 method has heat resistance and potential as a catalyst for the decomposition of the eco-friendly liquid propellants.

• Information Systems Review
• /
• v.14 no.1
• /
• pp.85-103
• /
• 2012

ISMP is a method of writing clearly the user requirements in the RFP(Request for Proposal) of the IS development projects. Unlike the conventional methods of RFP preparation that describe the user requirements of target systems in a rather superficial manner, ISMP systematically identifies the businesses needs and the status of information technology, analyzes in detail the user requirements, and defines in detail the specific functions of the target systems. By increasing the clarity of RFP, the scale and complexity of related businesses can be calculated accurately, many responding companies can prepare proposals clearly, and the level of fairness during the evaluation of many proposals can be improved, as well. Above all though, the problems that are posed as chronic challenges in this field, i.e., the misunderstanding and conflicts between the users and developers, excessive burden on developers, etc. can be resolved. This study is a case study that analyzes the execution process, execution accomplishment, problems, and the success factors of two pilot projects that introduced ISMP for the first time. ISMP performance procedures of actual site were verified, and how the user needs in the request for quote are described was examined. The satisfaction levels of ISMP RFP for quote were found to be high as compared to the conventional RFP. Although occurred were some problems such as RFP preparation difficulties, increased workload, etc. due to the lack of understanding and execution experience of ISMP, in overall, also occurred were some positive effects such as the establishment of the scope of target systems, improved information sharing and cooperation between the users and the developers, seamless communication between issuing customer corporations and IT service companies, reduction of changes in user requirements, etc. As a result of conducting action research type in-depth interviews on the persons in charge of actual work, factors were derived as ISMP success factors: prior consensus on the need for ISMP, the acquisition of execution resources resulting from the support of CEO and CIO, and the selection of specification level of the user requirements. The results of this study will provide useful site information to the corporations that are considering adopting ISMP and IT service firms, and present meaningful suggestions on the future study directions to researchers in the field of IT service competitive advantages.