• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.197-202
• /
• 2010

자발 진동하는 층류 예혼합 분젠 화염을 관찰하기 위하여 분기관을 가진 연소기를 제작 하였다. 특히, 조건에 따른 화염 거동을 살펴봤으며, 화염 표면적과 열발생 변동의 관계에 대하여 고찰하였다. 본 연구에서 사용된 당량비는 1.1 이고, 노즐 출구 평균 유속은 1.75 m/sec 이다. 연소 챔버와 분기관의 길이비(L.R.)는 연소기 내 압력 변동에 영향을 미치며, 결과적으로 화염 거동 특성이 달라짐을 관찰하였다. 또한, 간섭 필터의 유무에 따른 $OH^*$, $CH^*$, 그리고 화염 자발광은 정성적으로 유사한 거동을 나타냈으며, 자발 진동하는 층류 예혼합 분젠 화염의 화염 표면적 변동과 열발생 변동은 선형적인 관계를 가짐을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1084-1087
• /
• 2017

액체로켓에서 엔진의 시동은 산화제와 연료를 연소기에 매우 짧은 시간의 차를 두고 주입하여야 하며, 이때 주입시간의 간격, 점화기 작동 지연 등은 방대한 량의 추진제 혼합물에 에너지를 인가함으로서 대형 폭발로 이어질 수 있는 상황이 된다. 그러므로 각 추진제의 천이특성과 연소기 또는 가스발생기의 유입 시점을 측정하는 것은 매우 중요하며, 상대적으로 느린 응답 특성을 갖는 정압으로는 유입 시점을 관측하기에는 어려움이 많으므로 추진제 유로를 따라 동압을 측정하여 보다 정확한 유입시점을 찾을 수 있었다.

• 한국연소학회지
• /
• 제16권1호
• /
• pp.52-57
• /
• 2011

The present study describes the characteristics of combustion and exhaust emissions in compression ignition engines using diesel-gasoline dual fuel. For investigating combustion characteristics, diesel fuel was injected directly in a single-cylinder compression ignition engine with a common-rail injection system and gasoline fuel was injected into a premixed chamber installed in an intake port. In order to investigate exhaust emission characteristics, exhaust gas was measured by emission analyzer and smoke meter. The experimental results showed that cases of diesel-gasoline dual fuel combustion exhibited extended ignition delay and reduced peak combustion pressure compared to those of directly injected diesel fuel cases. Furthermore, premixed gasoline-air mixture reduced NOx emissions due to low peak of rate of heat release(ROHR).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2856-2861
• /
• 2008

A catalytic burner has been developed to utilize thermal energy from the fossil fuel without nitrogen oxides (NOx) emission. The burner is shaped into a mat to maximize the heating surface. Premixed combustion has been developed to be used in a closed chamber, such as a radiation type industrial dryer. The burner yields the thermal energy in the form of thermal radiation in the infrared regime, which is proved to be effective to dry organic substances for low moisture condition. Thermal efficiency including the sensible heat is better correlated to the moisture compared to the dry rate.

• 한국분무공학회지
• /
• 제27권1호
• /
• pp.18-25
• /
• 2022

Hot-firing tests were performed to experimentally confirm the effect of the eigenmode in the fuel-air mixing section on combustion instability by changing mixing section length, inlet mean velocity, equivalence ratio, and swirler geometry. A premixed gas composed of air and ethylene was supplied to the combustion chamber through an mixing section and an axial swirler. As the mixing section length increased, the inlet velocity perturbation decreased, but the combustion instability increased more. It was found that the resonance frequency of the first longitudinal mode in the mixing section shifted to the third longitudinal mode as the length of the mixing section increased. The results implied that the transition of the resonace frquency by changing the length of the mixing section might cause combustion instability.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.326-335
• /
• 2017

It is known that diesel engines have the disadvantage of high emission levels of NOx and PM. Therefore, many combustion strategies have been developed to reduce these harmful NOx and PM emissions in a diesel engine. Among these strategies, HCCI(Homogeneous Charge Compression Ignition) and PCCI(Premixed Charge Compression Ignition) are the most popular as these can reduce NOx and PM simultaneously. However, when a single fuel like diesel is applied, it is difficult to control the combustion phase and this can lead to power reduction. In this study, premixed gasoline and pilot diesel were used to overcome the problems of controllability of the combustion phase and harmful emissions. We injected gasoline directly into the combustion chamber and the gasoline/air mixture was ignited with a pilot diesel fuel near the top dead center. The results showed that the combustion and emission characteristics of dual-fuel combustion were comparable to those of conventional diesel combustion. When we applied the dual-fuel PCCI combustion concept, more than 90 % of NOx and PM emission was reduced simultaneously without significant degradation of efficiency compared to conventional diesel combustion.

• 한국추진공학회지
• /
• 제15권6호
• /
• pp.1-6
• /
• 2011

본 연구에서는 정상초음파장의 간섭에 의해 야기되는 예혼합화염의 구조 변이를 규명하기 위한 실험 결과를 제시한다. 화염전파를 관찰하기 위해 슐리렌 기법을 이용하였으며, 초기압력 및 연소챔버 개방 유무에 따른 화염선단의 형태 및 화염 전파속도를 고찰하였다. 정상초음파장에 의한 화염선단의 찌그러짐이 관찰되었고, 초음파장의 특성이 변하지 않는 한 그 수직방향으로의 위치는 일정하였다. 정상초음파의 영향을 받은 화염은 전파할수록 구조적 변화가 심해졌으며, 전파속도 또한 증가하였다. 반사파와 정상초음파의 영향으로 연꽃모양의 화염(lotus flame)이 형성되는 사실을 발견할 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.240-243
• /
• 2003

Combustion instability phenomena have been observed in various different combustion systems. For each specific combustion system, pressure fluctuations measured during high frequency combustion instability presented many different characteristics. High frequency instability occurring in a lean premixed gas turbine combustor mar be dominantly affected by a nonlinear relation between pressure oscillations and heat release rate fluctuations, and gas dynamics plays a crucial role in determining an amplitude of a limit cycle for a liquid rocket thrust chamber. Combustion instability phenomena manifest their inherent nonlinear characteristics. One is a limit cycle and the other bifurcation described by nonlinear time series analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.225-231
• /
• 1998

Flame propagation speed characteristics of methante-air mixtures were experimentally investigated in combustion chamber modelled engine. Flame propagation process was known as a funtion of equivalence ratio initial pressure and initial temperature. Ion probe and schlieren photograph were applied to measure the local flame speed and flame radius in quiescent mixtures. Pressure was also measured to make sure of the reproducibility and to apply combustion analysis. Burning velocity was calculated from the flame propagation speed and combustion analysis. Flames were developed faster with higher initial pressure and initial temperature but showed maximum propagation speed at equivalence ratio 1.1 regardless of initial pressure and temperature. Local flame speed was maximum values at near midpoint between center and wall.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.28-35
• /
• 1996

In this paper, we study effect of the factors, participating in the combustion as the initial conditions, such as the flow characteristics of the mixture and the initial temperature, pressure and equivalence ratio in the chamber on the ignitability of the mixture, the combustion duration and the maximum combustion-pressure. The experiment was performed in a constant-volume combustion chamber, with turbulent flow inside, equivalent to the actual engine at TDC. The present experiment utilizes three devices which differ from each other in the distribution and the magnitude of discharge energy.