• 제목/요약/키워드: Premature Failure

검색결과 262건 처리시간 0.022초

비내진 철근콘크리트 건축물의 FRP 재킷에 대한 내진보강 설계 전략 (Seismic Retrofit Scheme of FRP Column Jacketing System for Non-Seismic RC Building Frame)

  • 황희진;김혜원;오근영;신지욱
    • 한국지진공학회논문집
    • /
    • 제27권6호
    • /
    • pp.293-301
    • /
    • 2023
  • Existing reinforced concrete buildings with seismically deficient details have premature failure under earthquake loads. The fiber-reinforced polymer column jacket enhances the lateral resisting capacities with additional confining pressures. This paper aims to quantify the retrofit effect varying the confinement and stiffness-related parameters under three earthquake scenarios and establish the retrofit strategy. The retrofit effects were estimated by comparing energy demands between non-retrofitted and retrofitted conditions. The retrofit design parameters are determined considering seismic hazard levels to maximize the retrofit effects. The critical parameters of the retrofit system were determined by the confinement-related parameters at moderate and high seismic levels and the stiffness-related parameters at low seismic levels.

Super Duplex Stainless Steel Matrix Composites with High Strength and Favorable Ductility Achieved Through Laser Powder Bed Fusion and Powder Mixture

  • Yongjian Fang;Yali Zhang;Jonghwan Suhr
    • Composites Research
    • /
    • 제37권2호
    • /
    • pp.94-100
    • /
    • 2024
  • In order to evade the premature failure of super duplex stainless steels (SDSSs) in some harsh environments, the increase of their mechanical properties is a promising approach. In this study, based on the laser powder bed fusion (LPBF) technique, SDSS matrix composites without post heat treatment were fabricated by using the powder mixture of SDSSs, super austenitic stainless steels (SASSs) and micron-sized TiC particles. Many in-situ TiCxNy nanoparticles were found to be formed by using micron-sized TiC particles in as-built composites, and both fine ferrite and austenite grains were generated. The as-built composites exhibited an excellent combination of high ultimate tensile strength (UTS) (~1066 MPa) and good uniform elongation (UE) (~15.6%), showing a better mechanical property compared with other reported LPBF-fabricated SDSSs, which was mainly attributed to the fine grain, Orowan and dislocation strengthening mechanisms. In particular, the successful fabrication of SDSS matrix composites can set the stage for producing high-performance metallic parts via LPBF technique.

Analysis of mechanical performance of continuous steel beams with variable section bonded by a prestressed composite plate

  • Tahar Hassaine Daouadji;Rabahi Abderezak;Benferhat Rabia
    • Steel and Composite Structures
    • /
    • 제50권2호
    • /
    • pp.183-199
    • /
    • 2024
  • In this paper, a closed-form rigorous solution for interfacial stress in continuous steel beam with variable section strengthened with bonded prestressed FRP plates and subjected to a uniformly distributed load is developed using linear elastic theory and including the variation of fiber volume fractions with a longitudinal orientation of the fibers of the FRP plates. The results show that there exists a high concentration of both shear and normal stress at the ends of the laminate, which might result in premature failure of the strengthening scheme at these locations. The theoretical predictions are compared with other existing solutions. Overall, the predictions of the different solutions agree closely with each other. A parametric study has been conducted to investigate the sensitivity of interface behavior to parameters such as laminate and adhesive stiffness, the thickness of the laminate and the fiber volume fractions where all were found to have a marked effect on the magnitude of maximum shear and normal stress in the composite member. This research gives a numerical precision in relating to the others studies which neglect the effect of prestressed plate and the shear lag impact. The physical and geometric properties of materials are taken into account, and that may play an important role in reducing the interfacial stresses magnitude.

초극소저출생체중아에서 출생체중별 발관시기 및 첫 발관 시의 성공/실패 예측인자 (Extubation Time by Birth Weight and the Predictors for Success/Failure at the First Extubation in Extremely Low Birth Weight Infants)

  • 최창원;박성은;전가원;유은정;황종희;장윤실;박원순
    • Clinical and Experimental Pediatrics
    • /
    • 제48권5호
    • /
    • pp.488-494
    • /
    • 2005
  • 목 적 : 본 연구는 초극소저출생체중아에서 출생체중에 따른 발관 양상을 알아보고 첫 발관에서의 성공/실패를 예측할 수 있는 인자들을 찾아보고자 하였다. 방 법 : 2000년 1월부터 2004년 6월까지 삼성서울병원 신생아 중환자실에 입원하였던 113명의 출생체중 1,000 g 미만의 초극소저출생체중아들을 대상으로, 첫 발관 성공군과 실패군 간에 첫 발관 성공과 관련이 있을 것이라고 생각되는 인자들의 차이를 비교하여 보았다. 결 과 : 출생체중이 작아질수록 발관 성공일은 유의하게 지연되었다 : 900-999 g에서 $16{\pm}3$일; 800-899 g에서 $20{\pm}3$일; 700-799 g에서 $35{\pm}4$일; 600-699 g에서 $37{\pm}9$일; 599 g 이하에서 $49{\pm}12$일. 113명의 대상환아들 중 25명(22%)이 첫 발관에 실패하였다. 경계역의 유의성으로 조기양막파수는 발관 성공과 관련이 있었고, 공기 누출 증후군은 발관 실패와 관련이 있었다. 첫 발관 시도 시의 출생 후 나이, 교정연령, 체중, 영양상태와 인공환기기 설정은 발관 성공/실패 여부와 관련이 없었다. 첫 발관에 실패한 환아들은 첫 발관에 성공한 환아들에 비해 발관 성공일이 유의하게 지연되었고, 후발 패혈증의 빈도와 사망률도 유의하게 높았다. 결 론 : 저자들은 첫 발관 성공/실패를 예측할 수 있는 인자들을 찾지 못하였다. 첫 발관에 실패한 경우에는 후발 패혈증과 사망의 위험이 증가하였다. 향후 발관 성공/실패를 예측할 수 있는 인자들을 찾아내기 위한 지속적인 연구가 필요하다.

고밀도 폴리에틸렌 융착부에 대한 단기간 파손 평가법 개발 - 한계하중 적용 - (Development of a Short-term Failure Assessment of High Density Polyethylene Pipe Welds - Application of the Limit Load Analysis -)

  • 류호완;한재준;김윤재;김종성;김정현;장창희
    • 대한기계학회논문집A
    • /
    • 제39권4호
    • /
    • pp.405-413
    • /
    • 2015
  • 최근 미국에서는 가동기간이 오래된 원전 매설배관에서 부식 및 침식에 의해 삼중수소 누설로 지하수가 오염되는 사례가 급증하고 있다. 따라서, 현재 원전 안전등급 매설배관으로 사용되고 있는 금속재료의 배관을 대신해서 부식 및 침식 등의 열화 손상에 대한 저항성이 우수한 고밀도 폴리에틸렌(HDPE) 배관을 ASME Code Class 3 안전계통 배관으로 사용하기 위한 연구가 수행되고 있다. 본 연구에서는 발전소 가동 중 매설배관에 가해질 수 있는 하중과 온도 범위를 바탕으로 HDPE 배관 융착부에 대한 인장 시험과 저속균열성장 (SCG) 시험을 수행하였다. 시험 결과로 얻은 SCG 시험편의 파단면을 분석하여 HDPE 재료의 파손 기구를 파악하였다. 이를 바탕으로 3D 유한요소 해석을 이용하여 균열이 있는 HDPE 재료가 버틸 수 있는 한계하중에 대한 검증을 수행하였다.

형상비 2.5의 RC 교각의 내진 곡률연성도 (Seismic Curvature Ductility of RC Bridge Piers with 2.5 Aspect Ratio)

  • 정영수;박창규;이은희
    • 한국지진공학회논문집
    • /
    • 제8권3호
    • /
    • pp.1-12
    • /
    • 2004
  • 1989년 로마프리타지진 및 1995년 효고현 남부지진등 많은 교각에서 휨-전단 파괴에 의한 피해가 발생하였다. 그럼에도 불구하고 지금까지의 교각의 내진성능에 관한 연구는 대부분 휨파괴에 대한 연구가 지배적이었다. RC 교각의 내진성능은 교각의 소성힌지구간의 성능에 좌우되고 있으며, 소성힌지의 연성은 곡률에 의해 평가하는 것이 바람직하다. 실험연구는 지진하중의 손상을 입은 RC교각의 휨전단거동에 관한 소성힌지구간 내의 곡률변화를 평가하였다. 실험에 사용된 7기의 실험체는 형상비 2.5에 횡방향 구속력, 주철근의 겹침이음 그리고 섬유보강을 변수로 가지고 있다. 이 실험체는 유사동적실험 수행을 통해 손상을 주었으며, 유사동적실험 후에는 일정한 축력,$P=0.1f_{ck}A_g$을 유지하면서 변위제어방식으로 유사정적실험을 실시하여 잔류내진성능을 평가하였다. 실험 결과 기초에서 15cm 구간에 가장 큰 곡률이 발생하였으며 파괴도 이 단면에 집중되었다. 또한, 연성도 분석결과 주철근이 겹침이음 된 RC 교각이 낮은 곡률연성도를 보였으며, 이를 섬유보강한 실험체의 휨강성과 곡률연성도는 현저히 개선되었다. 그리고, 교각의 곡률변화를 분석하여 횡구속력을 고려한 등가소성힌지길이 산정식을 제안하였으며, 이 제안된 식을 적용하여 변위연성도와 곡률연성도 관계를 분석하였다.

CFRP판으로 프리스트레싱 보강한 RC 보의 휨거동에 관한 실험적 연구 (Experimental Study on Flexural Behavior of RC Beams Strengthened with Prestressed CFRP Plate)

  • 한상훈;홍기남;김형진;우상균
    • 대한토목학회논문집
    • /
    • 제26권2A호
    • /
    • pp.301-310
    • /
    • 2006
  • 탄소섬유보강재(CFRP)는 부식에 대한 저항성과 작은 중량에도 불구하고 높은 강도와 강성을 가지고 있어 토목구조물의 보강에 적합하다. 콘크리트 구조물 보강분야에 CFRP의 적용은 보강이 필요한 구조물들이 점점 증가하면서 점차적으로 확대되고 있다. 그러나, CFRP판을 표면에 부착하는 표면부착 공법으로 보강된 RC 부재들은 설계 시 예상되는 파괴하중보다 작은 하중에서 조기파괴가 발생하게 되어 새로운 보강방법의 필요성이 대두되고 있다. 이러한 표면부착공법의 문제점은 CFRP판을 부착하기 전 긴장력을 도입함으로써 해결될 수 있을 것이다. 본 연구에서는 길이가 3.3 m인 21개의 실험체를 CFRP판 을 이용하여 보강한 후에 4점 휨실험을 실시하였다. CFRP판은 긴장하지 않거나 CFRP판의 변형률을 0.4-0.8%까지 긴장하여 부착하였다. 단부정착 장치를 설치한 모든 실험체는 프리스트레싱 수준과 관계없이 CFRP판의 파단으로 파괴되었으나, 단 부정착 장치가 없는 실험체는 조기 부착파괴로 인해 탄소판이 콘크리트로부터 탈락하면서 파괴되었다. 균열 발생 하중은 프리스트레싱 수준과 비례적인 관계에 있었으나, 프리스트레스를 가한 CFRP판으로 보강한 실험체의 최대하중은 프리스트레싱 수준의 영향을 크게 받지 않았다.

요추부 협착에서의 피질골 궤도 나사못 고정의 초기 실패 사례에 대한 고찰 (Early Failure of Cortical-Bone Screw Fixation in the Lumbar Spinal Stenosis)

  • 권지원;김진규;하중원;문성환;이환모;박융
    • 대한정형외과학회지
    • /
    • 제55권5호
    • /
    • pp.405-410
    • /
    • 2020
  • 목적: 퇴행성 요추부 척추 질환에 대한 수술적 치료로 척추 경 나사못(pedicle screw) 삽입술이 전통적으로 사용되어왔다. 이에 대한 대안으로 제시된 피질골 궤도 나사못(cortical-bone trajectory screw)은 덜 침습적인 후방 요추부 고정이 가능한 점과 몇몇의 생체 역학 연구에서 보고한 우수한 기계적 안정성을 장점으로 가지고 있다. 본 연구의 목적은 후방 감압술 후 후방 고정술 및 유합을 시행한 환자에 있어 피질골 궤도 나사못 고정술의 초기 실패에 관한 사례의 임상적 및 방사선적 결과를 알아보고자 함에 있다. 대상 및 방법: 요추의 퇴행성 척추 협착 및 척추 전방 전위에 대한 전통적인 척추 경 나사못 고정을 대안하여 피질골 궤도 나사못을 사용하여 2013년부터 2018년까지 수술적 치료를 시행한 311명의 환자를 대상으로 하였다. 수술 후 조기 고정 실패는 수술 후 6개월째, 외래 추시에서 시행한 컴퓨터 단층촬영(computed tomography) 및 방사선 사진상 나사못의 이완, 이탈 및 파손과 같은 고정 실패가 일어날 시로 정의하였다. 결과: 조기 고정 실패는 311예 중 46예(14.8%), 나사못 이완이 46예(14.8%), 이탈이 12예(3.9%), 파손이 4예(1.3%)에서 발생하였다. 해당 고정 실패가 일어난 부위 분석 시, L1이 7예(15.2%), L2가 3예(6.5%), L3가 4예(8.7%), L4가 4예(8.7%), L5가 4예(8.7%), 그리고 S1이 24예(52.2%)였다. 주로 말단 피질골 궤도 나사못 중에서도 S1 나사못에서 이완, 이탈 및 파손과 같은 고정 실패가 주로 발생하였다. 결론: 피질골 궤도 나사못 고정은 기존의 척추 경 나사못 고정과 비교했을 때 동등한 임상 결과 또는 적은 합병증을 나타낼 수 있는 하나의 대안이 될 수 있으나 골다공증이 있거나 특히 L5-S1 유합부위에서 전방지지구조가 되지 않는 조건일 때, 이완, 이탈, 파손 등의 조기 고정 실패가 나타나는 결과가 있었다.

후방 소개흉술을 통한 미숙아 동맥관 개존증의 수술요법 (Dorsal Mini-thoracotomy for PDA Closure in Premature Neonates)

  • 이향림;최창휴;손동우;심소연;박국양;박철현
    • Journal of Chest Surgery
    • /
    • 제42권4호
    • /
    • pp.434-440
    • /
    • 2009
  • 배경: 미숙아에 있어서 동맥관의 외과적 폐쇄술은 인도메타신 투여 후 치료 실패나 적응증이 되지 않는 경우 일반적으로 시행하고 있다. 그러나 초극소 저출생 체중아(ELBW, <1,000그램)에서는 일반적인 개흉술이나 흉관 삽입 자체 만으로도 사망률이나 이환율에 많은 영향을 미치게 된다. 이에 본 연구에서는 후방 소개흉술(dosal rninithoracotomy)을 통해 동맥관을 페쇄하고, 흉관을 삽입하지 않은 수술 방법의 단기성적을 조사하였다. 대상 및 방법: 2006년 3월부터 2008년 11월까지 동맥관의 의과적 폐쇄술을 시행한 재태기간 30주 이하의 미숙아 24명을 대상으로 하였다. 수술은 모두 신생아 중환자실에서 시행하였고 환아를 엎드려 누윈 상태에서 좌흉부를 30도 올려주는 체위를 취하고 견갑골 직하부위에 2 cm크기의 피부절개를 통해 제 3늑간으로 접근하였다. 면봉을 이용하여 벽측늑막 밖에서 조심스럽게 후종격동으로 박리를 시행하여 동맥관 주변조직을 박리 후 클립(Hemoclip)을 이중으로 사용하여 폐쇄 하였다. 늑막층의 손상이 없거나 미세한 경우는 흉관을 삽입치 않고 창상 봉합을 하여 수술을 종료하였다. 결과: 환아의 출생 시 재태기간은 23주에서 30주 사이로 평균 26.5$\pm$2.1주였으며, 수술 시의 평균 연령은 11$\pm$11일(0$\sim$33일)이었고 수술 시 평균 체중은 933$\pm$271그램(570$\sim$1,700그램) 이었다. 18명의 환아가 인도메타신 치료에 실패하고, 6명의 환아는 약물치료의 적응이 되지 않아 수술적 치료를 시행하였다. 모든 환아에서 수술 직후 확인한 단순 흉부 방사선상 의미있는 기흉은 관찰되지 않았으며, 술후 시행한 심초음파에서 2예를 제외하고는 완전한 폐쇄를 확인하였다. 잔존 단락이 있던 예들은 추적 관찰한 심초음파 검사에서 각각 수술 후 5일과 59일에 폐쇄가 확인되었으며 건강하게 퇴원하였다. 8명의 환아가 사망하였으나 수술과 직접적인 관계의 사인은 없었다. 결론: 미숙아의 동맥관 개존증의 수술요법으로 후방 소개흉술은 만족스러운 수술시야를 확보해 동맥관 폐쇄에 어려움이 없으며, 술후 흉관의 삽입을 줄임으로써 안전하고 효과적인 방법으로 여겨진다.

폐경전 무월경 여성에 있어서 골밀도 측정에 관한 연구 (Bone Mineral Density in Premenopausal Amenorrheic Women with Hypogonadism)

  • 박기현;이병석;이보연;조동제;송찬호
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제19권1호
    • /
    • pp.49-56
    • /
    • 1992
  • Bone mineral density was measured to assess whether the patients with premonopausal hypogonadism, comprised of 19 patients with hypogonadotropic hypogonadism(HH), 55 with premature ovarian failure(POF), 23 with hyperprolactinemia(HPLN), and 8 with Sheehan's syndrome. All aged from 20 to 39, were associated with some decrease in regional bone mass compared with that of 63 normal-associated with some decrease in regional bone mass compared with that of 63 normal-cycling control women matched with age and sex. Measurement of bone mineral density was carried out using Dual photon absorptiometry at four sites; femur neck, ward's triangle, trochanter and spine(L2-L4). Bone mineral density at all four sites were significantly decreased in patients with HH(p<0.01), POF(p<0.01). In hyperprolactinemic patients, the decrease in bone mass was significant at femur neck and Ward's triangle(p<0.05). The patients with POF were noted to be associated with significant bone loss when their duration of amenorrhea exceeded one year. In this study, the degree of loss of bone mass and the affected sites seemed to be different depending on the various types of hypogonadism and POF was noted have caused the appearance of loss of bone mass earlier than other thpes of hypogondism we experienced.

  • PDF