• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.649-654
• /
• 2001

This paper describes aerodynamic preliminary design performance prediction and flow analysis for centrifugal compressor of the marine middle engine turbocharger. The performance characteristics of turbocharger compressor are investigated at various operating conditions using mass flow rate and revolution speed, and computational flow analysis for impeller and diffuser at design point are performed. Preliminary design results correspond to actual compressor geometric values comparatively by applying modified slip factor. Performance prediction and flow analysis results show good agreement with experiments. Therefore, this will provide the performance prediction in preliminary design, and help to increase the design capability for optimized impeller.

• 항공우주시스템공학회지
• /
• 제1권1호
• /
• pp.36-44
• /
• 2007

This study was performed on preliminary structural design of a small scale WIG craft which has been developed as a next generation high speed maritime transportation system in Korea. A composite structure design using the foam-sandwich for main wing and tail fins and the honeycomb sandwich and skin-stringer-ring frame for fuselage was applied for weight reduction as well as structural stability. A commercial FEM code, NASTRAN for was utilized to confirm the structural safety for the reiterate design modifications to meet design requirements including the target weight. Each main wing was jointed with the fuselage by eight high strength insert bolts for easy assembling and disassembling as well as for assuring the required 20 years service life. For control surface structural design, the channel type spar, the foam sandwich skin and the lug joint were adopted.

• 한국전산구조공학회논문집
• /
• 제15권2호
• /
• pp.261-270
• /
• 2002

신경망은 설계자의 경험과 통찰력과 같은 비정형적 정보에 의존하는 초기 구조설계단계의 시스템화에 매우 적합하다. 초기 구조설계단계를 시작하는 시점에서는 설계정보가 매우 적음을 생각해 볼 때, 신경망 모델은 제한적인 적은 정보를 입력으로 하고 상대적으로 훨씬 많은 출력을 가지도록 설계되어야 한다. 그러나, 이러한 상황은 신경망 학습시 학습속도, 수렴, 출력 값의 신뢰성등 여러 가지 문제점을 초래한다. 본 연구에서는 이러한 문제점을 해결하기 위하여 설계 정보가 점진적으로 증가하는 흐름을 가지고 있다는 점에 착안해서 다단계 신경망을 제시하고, 이를 토대로 사장교 초기 구조설계시스템에 대한 원형을 구현하였다. 본 연구결과 초기 구조설계단계 전체에 대해서 하나의 신경 망으로 설계하는 것 보다 다단계 신경 망으로 나누어서 동일한 작업을 수행하도록 하는 것이 훨씬 유리하다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.64-69
• /
• 1998

In this study, a preliminary design method of the axial fan was systematically established based on the two-dimensional cascade theory. Flow deviation, lift coefficient, distribution of velocity and pressure coefficient on blade surfaces were predicted by an inviscid theory of Martensen method, which was also applied to select an airfoil of required performance in the present design process. The aerodynamic performance of designed blades can be predicted quickly and reasonably by using the through-flow calculation method in the preliminary design process. It would be recommendable to adopt three-dimensional viscous flow calculation at the final design refinement stage.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.185-192
• /
• 2003

This paper proposes an efficient mechanism design system of multi-stage gear drives including not only parallel shaft gears but also non-parallel gears such as bevel and worm gear drives. The system automatically generates three dimensional structures of specification-adjusted mechanisms, and shows the sorted list of the mechanisms according to the evaluation result by using a fuzzy expert system. The list can be used as reliable candidates of the spatial mechanism structures of multi-stage gear drives. Thus, it is expected that the system can increase the efficiency of design and cut off the expenses of preliminary design considerably.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.885-891
• /
• 2011

본 논문은 액체산소와 케로신을 추진제로 하는 액체로켓엔진의 성능평가를 위한 엔진 지상 연소시험설비 예비설계 결과를 기술하였다. 엔진 지상 연소시험설비의 설계 요구조건에 기반한 설계 규격 및 설비 구성을 제시하였다. 엔진 지상 연소시험설비 예비설계 결과는 향후 한국형발사체 75톤급 엔진 지상 연소시험설비의 상세설계 및 구축을 위한 기본 자료로 활용될 예정이다.

• 한국연소학회지
• /
• 제20권3호
• /
• pp.27-34
• /
• 2015

The objective of the current study is to introduce detailed process for a preliminary combustor design, and to develop a computer code for it. The program includes various empirical and semi-empirical methodologies for diffuser deign, combustor sizing, air distribution, and sub-component design such as primary and secondary zones. Using the developed program, the combustor sizing results are shown from an assumption of simple annual combustor cycle analysis. Two options are employed, 1) pressure loss approach, and 2) velocity assumption approach. Design results show that there are no significant differences in combustor sizing between two design options. Further code improvement is required for performance and emission evaluations of the designed combustor.

• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.14-19
• /
• 2008

This paper presents the procedure and the results of the preliminary design of the fuel tank as a part of developing the helicopter. For the requirements of operational capability, MIL-DTL-27422D and Defence Standard 15-2/Issue 1 are considered to be applied in developing a helicopter fuel tank. The procedure of the fuel tank development is set up including interface plate design, tank design, former design, tank material lay-up, and tank installation assessment. The outer moulded line and fittings of fuel tank have being designed, and several test will be performed to get the qualification.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.233-240
• /
• 2001

Artificial neural networks(ANN) have been exploited where the relationship among information is very complicated and nonlinear. It is appropriate to computerize the information and knowledge used in the preliminary design stage where it lacks of formality of representation of designers' experience and intuition. However, most designers start the preliminary design stage with very little information. Therefore, the ANN model for this stage must be designed to have input much less than output. This case usually causes big troubles such as in learning time, convergence and reliability of solutions. To address this problem, this paper proposes multi-level neural networks for progressive structural design considering that all the design information can not be obtained at a time but are growing gradually. The use of multi-level networks developed in this paper has been proved its validity by applying it to the preliminary design of cable-stayed bridges.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.51-58
• /
• 2020

Despite the recent growth of interest in molten salt reactor technology and the crucial role which heat transfer plays in the design of power reactors, specific studies on the design of heat exchangers for the Molten Salt Fast Reactor have not yet been performed. In this work we deliver a preliminary but quantitative analysis of the intermediate heat exchangers, based on reference design data from the SAMOFAR H2020-Euratom project. Two different promising reference technologies are selected for study thanks to their compactness features, the Printed Circuit and the Helical Coil heat exchangers. We present preliminary design results for each technology, based on simplified design tools. Results highlight the limiting effects of the compactness constraints imposed on the fuel salt inventory and the allowed size. Large pressure drops on both flow sides are to be expected, with negative consequences on pumping power and natural circulation capabilities. The small size required for the flow channels also represents possible fabrication issues and safety concerns regarding channel blockage.