• Journal of Acupuncture Research
• /
• v.33 no.3
• /
• pp.89-99
• /
• 2016

Objectives : This study was performed to develop objective methods for evaluating facial palsy sequelae using a 3D Facial Scanning System. Methods : Fifty-eight patients with facial palsy sequelae were selected. Their medical records were reviewed to collect demographic data, facial palsy sequelae evaluation, Facial Disability Index questionnaire, and test results (3D Facial Scanning System). Five different facial expressions (at rest, eye closure, eyebrow elevation, smiling, and whistling) were photographed. Sunnybrook Scale was associated with distances between predetermined facial points. Results : The average Sunnybrook composite score was $58.88{\pm}17.31$. Secondary movements (mouth to eye synkinesis, contracture of eye, and contracture of mouth) showed significant difference according to the Sunnybrook Scale. In voluntary movements, eyebrow height at eyebrow elevation, length between mouth angle and central line while whistling, and eyelid width at maximum eye opening showed significant difference. Facial palsy Sequelae Index (FSI) was correlated with Sunnybrook sub-scales (resting symmetry, voluntary movement, and synkinesis). Conclusion : These results demonstrate that a 3D Facial Scanning System is useful for evaluating facial palsy sequelae. This method may facilitate objective evaluation for facial palsy sequelae and it could be applied in clinical trials.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.290-298
• /
• 2011

The influence of co-existing gases on the hydrogen permeation was studied through a Pd-coated $V_{53}Ti_{26}Ni_{21}$ alloy membrane. The hydrogen permeation characteristics of Pd-coated $V_{53}Ti_{26}Ni_{21}$ alloy membrane have been investigated in the pressure range 1-3 bar under pure hydrogen and hydrogen mixture gas with carbon dioxide and carbon monoxide at $450^{\circ}C$. Preliminary hydrogen permeation experiments have been confirmed that hydrogen flux was $5.36mL/min/cm^2$ for a Pd-coated $V_{53}Ti_{26}Ni_{21}$ alloy membrane (thick: 0.5 mm) using pure hydrogen as the feed gas. In addition, hydrogen fluxes were 4.46, 5.20, $3.91mL /min/cm^2$ for$V_{53}Ti_{26}Ni_{21}$ alloy membrane using $H_2/CO_2$, $H_2/CO$ and $H_2/CO_2/CO$ as the feed gas respectively. Therefore, the hydrogen permeation flux decreased with decrease of hydrogen partial pressure irrespective of temperature and pressure when $H_2/CO_2$, $H_2/CO$ and $H_2/CO_2/CO$ mixture applied as feed gas respectively and permeation fluxes were satisfied with Sievert's law in different feed conditions. It was found from XRD results after permeation test that the Pd-coated $V_{53}Ti_{26}Ni_{21}$ alloy membrane had good stability and durability for various mixtures feeding condition.

• Asia-Pacific Journal of Business
• /
• v.6 no.2
• /
• pp.81-95
• /
• 2015

This study is an investigative study into the effects that the 'travel motivations' of participants on walking tourism has on their 'degree of satisfaction' by identifying tourist motivations for selecting walking tour among many types of tourism and their effects on hikers' degree of satisfaction. This study was conducted with hikers affiliated with 'walking on beautiful roads '-one of Busan's preliminary social enterprises- with a total of 176 copies used for a final effective sample. Data collected was analyzed using SPSS WIN 18.0 to conduct a frequency analysis of the sample. Along with exploratory factor analysis, Cronbach's ${\alpha}$ coefficient was used as an estimate of the validity and reliability of each factor. Multiple regression analysis was done for an analysis of travel motivations and their effects on satisfaction. The scale rates items in the questionnaire in the following categories: 'Motivations' for walking tours consist of 5 factors- vacation, soul-searching, social get-togethers, nature tour, community experience-with a total of 20 items. 'The degree of satisfaction' is made up of a factor with a total of 4 items. The results of the study are as follows: with respect to the hypothesis that motivations for walking tour would have a positive effect on the degree of satisfaction, test results show that 'motivations' have significant partial effects on the 'degree of satisfaction'. Motivations affect the degree of satisfaction in the order of nature tour and soul-searching except for experience and social get-togethers- an indication that participants on walking tours tend to travel for the attractiveness of nature, wanting time for reflection and meditation. As the first investigative study into participants in walking tours products offered by travel agencies, the study has the following implications for marketers: First, travel agencies selling walking tour products and government institutions concerned about the development of hiking trails need to discuss ways to make the most of natural resources as they are- rather than using development-oriented approaches. The study has its own limitation: it is that with the lack of domestic and international studies on walking tours, the study has not gained access to precedent studies on the subject so it has not established a systemic approach to the emerging type of tourism. Hopefully, this study will make a small contribution to its development.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.84-90
• /
• 2012

Patents in Korea, Japan and the U.S. were searched at the Korea Intellectual Property Rights Information Service (KIPRIS) of Korea Institute of Patent Information using related keywords in order to analyze the trend of patents on the usage of waste wood. Materials on a total of 77 patents in Korea, 317 patents in Japan, and 316 patents in the U.S. that had been registered as patents as of Dec. 31, 2011 were collected. Among the collected materials, the patents rejected, expired, annulled, withdrawn and waived as well as those which had little relationship with waste wood were excluded and the 71 patents in Korea, 227 patents in Japan and 216 patents in the U.S. were finally selected for analysis. In addition, the properties of the mortar which used waste wood as an alternative for a part of the fine aggregate were tested as a basic study for the usage of waste wood as a lightweight aggregate for concrete. For the test, the waste wood of the pine tree was crushed, sifted through No. 8(2.4 mm) sieve, and then dried for 24 hours at $100{\pm}5^{\circ}C$. As it is known that some kinds of tree prevent the hardening of cement when the wood is mixed with cement, the crushed waste wood in this study was dipped in the water of $20^{\circ}C$, $50^{\circ}C$, $80^{\circ}C$ and $100^{\circ}C$ and then dried up before testing the properties of the mortar to examine the effect of the preliminary treatment of crushed waste wood.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.727-736
• /
• 2010

This paper describes results of an preliminary study to produce strain hardening cement-based composites (SHCCs)with consideration of sustainability for infrastructure applications. The aims of this study are to evaluate the influence of recycled materials on the mechanical characteristics of SHCCs, such as compressive, four-point bending, and direct tensile behaviors, and to give basic data for constitutive model for analyzing and designing infra structures with SHCCs. In this study, silica sand, cement, and PVA fibers, were partially replaced with recycled sand, fly-ash, and FET fibers in the mixture of SHCCs, respectively. Test results indicated that fly-ash could improve both bending and direct tensile performance of SHCCs due to increasing chemical bond strength at the interface between PVA fibers and cement matrices. However, SHCCs replaced with PET fibers showed much lower performance in bending and direct tensile tests due to originally low mechanical properties of own fibers, although compressive behavior is similar to PVA2.0 specimen. Also, it was noted that the recycled sand would increase elastic modulus of SHCCs due to larger grain size compared to silica sand. Based on pre-set target value to maintain the performance of SHCCs, it was concluded that the replacement ratio below 20% of fly-ash or below 50% of recycled sands would be desirable for creating sustainable SHCCs.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.11
• /
• pp.1971-1982
• /
• 2017

Piliated Lactobacillus rhamnosus (pLR) strains possess higher adherent capacity than non-piliated strains. The objective of this study was to isolate and characterize probiotic pLR strains in human fecal samples. To this end, mouse polyclonal antiserum (anti-SpaA) against the recombinant pilus protein (SpaA) of L. rhamnosus strain GG (LGG) was prepared and tested for its reactivity and specificity. With the anti-SpaA, a method combining the de Man, Rogosa, and Sharpe (MRS) agar plating separation and colony immunoblotting (CIB) was developed to isolate pLR from 124 human fecal samples. The genetic and phenotypic characteristics of the resultant pLR isolates were compared by randomly amplified polymorphic DNA (RAPD) fingerprinting, and examination of adhesion to Caco-2 cells, hydrophobicity, autoaggregation, and in vitro gastrointestinal tolerance. Anti-SpaA specifically reacted with three pLR strains of 25 test strains, as assessed by western blotting, immunofluorescence flow cytometry, and immunoelectron microscopy (IEM) assays. The optimized MRS agar separation plus anti-SpaA-based CIB procedure could quantitatively detect $2.5{\times}10^3CFU/ml$ of pLR colonies spiked in $10^6CFU/ml$ of background bacteria. Eight pLR strains were identified in 124 human fecal samples, and were confirmed by 16S RNA gene sequencing and IEM identification. RAPD fingerprinting of the pLR strains revealed seven different patterns, of which only two isolates from infants showed the same RAPD profiles with LGG. Strain PLR06 was obtained with high adhesion and autoaggregation activities, hydrophobicity, and gastrointestinal tolerance. Anti-SpaA-based CIB is a rapid and inexpensive method for the preliminary screening of novel adherent L. rhamnosus strains for commercial purposes.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.380-384
• /
• 2009

Purpose: Autologous vessels remain the gold standard for vascular grafts in microanastomoses. However, they are sometimes unavailable and have a limited long - term patency. Synthetic vessels have high success rates in large - diameter reconstructions but failed when used as small - diameter grafts due to graft occlusion. It has been proved that endothelial cell seeding improves prosthesis performance and long - term patency. Among polyurethane, PET and ePTFE, polyurethane has the best affinity to endothelial cells and mechanical properties closest to human vessels. We examined the ability of endothelial cells to attach to a polyurethane graft manufactured by the electrospinning method. Methods: Endothelial cells, which were cultured from porcine internal jugular veins, were attached to polyurethane grafts with an internal diameter of 3 mm. The same cells were attached to allogeneic decellularized porcine internal carotid artery grafts as controls. Both of the 10 mm - long grafts were exposed to endothelial cells in a well for 1 hour. Each well contained $2{\times}10^5$ endothelial cells. The graft materials were rotated through 90 degrees every 15 minutes in order to minimize the effect of gravity. The extent of cell attachment was examined with the MTT assay. Results: The MTT assay showed good incorporation of endothelial cells into both grafts. For the evaluation of affinity, the number of attached cells was counted at 10 fields of microscopic examination with ${\times}40$ magnification. Endothelial cells adhered more to polyurethane grafts (mean, $127.4{\pm}6.2cells$) compared to porcine artery grafts (mean $45.8{\pm}5.1cells$)(p<0.05,Mann - Whitney test). Conclusion: In this study, we attached porcine endothelial cells to polyurethane grafts, manufactured by electrospinning. The grafts exhibited a better affinity to endothelial cells than allogeneic decellularized porcine internal carotid artery grafts. It is suggested that the time required for endothelial cells to attach to decellulized artery grafts may be longer than that which is required for attachment to polyurethane grafts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.239-240
• /
• 2012

With advancements in semiconductor device technologies, manufacturing processes are getting more complex and it became more difficult to maintain tighter process control. As the number of processing step increased for fabricating complex chip structure, potential fault inducing factors are prevail and their allowable margins are continuously reduced. Therefore, one of the key to success in semiconductor manufacturing is highly accurate and fast fault detection and classification at each stage to reduce any undesired variation and identify the cause of the fault. Sensors in the equipment are used to monitor the state of the process. The idea is that whenever there is a fault in the process, it appears as some variation in the output from any of the sensors monitoring the process. These sensors may refer to information about pressure, RF power or gas flow and etc. in the equipment. By relating the data from these sensors to the process condition, any abnormality in the process can be identified, but it still holds some degree of certainty. Our hypothesis in this research is to capture the features of equipment condition data from healthy process library. We can use the health data as a reference for upcoming processes and this is made possible by mathematically modeling of the acquired data. In this work we demonstrate the use of recurrent neural network (RNN) has been used. RNN is a dynamic neural network that makes the output as a function of previous inputs. In our case we have etch equipment tool set data, consisting of 22 parameters and 9 runs. This data was first synchronized using the Dynamic Time Warping (DTW) algorithm. The synchronized data from the sensors in the form of time series is then provided to RNN which trains and restructures itself according to the input and then predicts a value, one step ahead in time, which depends on the past values of data. Eight runs of process data were used to train the network, while in order to check the performance of the network, one run was used as a test input. Next, a mean squared error based probability generating function was used to assign probability of fault in each parameter by comparing the predicted and actual values of the data. In the future we will make use of the Bayesian Networks to classify the detected faults. Bayesian Networks use directed acyclic graphs that relate different parameters through their conditional dependencies in order to find inference among them. The relationships between parameters from the data will be used to generate the structure of Bayesian Network and then posterior probability of different faults will be calculated using inference algorithms.

• Journal of Korean Physical Therapy Science
• /
• v.19 no.4
• /
• pp.47-52
• /
• 2012

Purpose : The purpose of the study was to examine if a respiratory muscle strengthening training in patients with stroke can improve their pulmonary function. Methods : Volunteers were included for the study if a patient diagnosed stroke more than 6 months and had 24 points or higher in MMSE-K scores. Twenty-eight subjects participated in this study and were randomly divided into two groups; a breathing exercise group(n=14) and a control group(n=14). The intervention for all subjects was conducted for 20minutes, three times a week for 4 weeks. Subjects for the breathing exercise group had the respiratory muscle strengthening training using spiro-tigers, where-as subjects in the control group got their usual treatment ie a postural training. The six-minute walking test(6MWT) and the pulmonary function tests(FVC, $FEV_1$, $FEV_1$/FVC, VC, Vt, IRV and ERV) were employed to assess treatment effects at baseline and after their intervention. Results : Twenty-four subjects finished their 4-week treatment programs. The general characteristics between groups were found to be similar (p>0.05). The pulmonary function between groups were also observed no difference across groups at the baseline measurement (p>0.05). In the post treatment group comparison, subjects in the breathing exercise group showed an increase in lung function with VC ($2.73{\pm}0.80{\ell}$) and Vt ($0.87{\pm}0.38{\ell}$) than those in the control group ($1.91{\pm}0.80{\ell}$ and $0.48{\pm}0.22{\ell}$ respectively) (p<0.05). However, there was no difference found in 6MWT, FVC, $FEV_1$, $FEV_1$/FVC, IRV, and ERV across groups (p>0.05). Conclusion : A significant increase in VC and Vt was found in subjects with stroke, who had four-week training on respiratory muscle strengthening. However, respiratory muscle strengthening showed no effect on walking speed and FVC, $FEV_1$, $FEV_1$/FVC, IRV, and ERV in patients with stroke.

• Applied Biological Chemistry
• /
• v.14 no.1
• /
• pp.19-27
• /
• 1971

This experiment was conducted as a preliminary test to invent the quick ripening process for soysauces. The bran koji extract of 2 kinds of mold (Asp. niger and Asp. sojae) was used as enzyme sources in order to improve the rate of enzymatic conversion of raw materials and shorten the ripening period of soysauces. Soybean koji (inoculated Asp. sojae) and steamed soybean were enzymatically decomposed for 8 hours at $40^{\circ}C$, pH 4-6 with stirring at a rate of 1500 rpm. After the enzymatic treatment, soysauces were fermented by 4 kinds of processes with the above-mentioned salt tolerant microorganisms inoculated. After 4 weeks, sensory evolution for these soysauces products and analysis of chemical components were carried out. The results obtained were summarized as follows. 1. Soysauces prepared from decomposed koji by Asp. niger enzyme complex showed higher extractables, such as total nitrogen, amino nitrogen, pure extract and reducing sugar, than any other procedure. Extracted amounts of each components of soysauces prepared from this process during 1 month were similar to those of soysauces made from general procedure (control) for 5 to 6 months. 2. According to sensory evaluation, soysauce prepared from decomposed koji also showed best taste and were similar to that of soysauces prepared by general method for 6 months.