• 한국식생활문화학회지
• /
• 제35권2호
• /
• pp.127-142
• /
• 2020

This research is the first known to introduce and analyze food-related content among the records left by George Clayton Foulk (1856-1893), a naval attache dispatched as part of a U.S. delegation to Korea during the Joseon dynasty in the 19th century. Sketches and memos by Foulk provide important clues in understanding the food culture during the late Joseon dynasty. By analyzing the types of foods, table composition, and intervals between serving the nine rounds of food from the rural government office, which Foulk ate during his local trip, he was able to confirm that there was a starter ('preliminary table' or 'hors d'œuvre') before the main table and that it was served before the main dish.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.639-644
• /
• 1997

The work reported in this paper identifies the thermal-hydraulic phenomena that are expected to occur during a number of key transients in SMART(System-integrated Modular Advanced ReacTor) which is under development at KAERI. The result of this effort is based on the current design concept of SMART integral reactor. Although the design is still evolving, the preliminary phenomena Identification and Ranking Table(PIRT) has been developed based on the experts' knowledge and experience. The preliminary PIRT has been developed by consensus of KAERI expert panelists and AHP(Analytical Hierarchy Process). Preliminary PIRT developed in this paper is intended to be used to identify and integrate development areas of further experimental tests needed, thermal hydraulic models and correlations and code improvements for the safety analysis of the SMART.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.425-428
• /
• 1997

Effectiveness of corrective machining algorithm is verified experimentally in this paper by performing corrective lapping work to single side and double sides hydrostatic tables. Lapping is applied as machining method. Machining information is calculated from measured motion errors by applying the algorithm, without information on rail profile. It is possible to acquire 0.13pm of linear motion error, 1.40arcsec of angular motion error in the case of single side table, and 0.07pm of linear motion error, 1.42arcsec of angular motion error in the case of double sides table. The experiment is performed by the unskilled person after he experienced a little of preliminary machining. Experimental results show that corrective machining algorithm is very effective, and anyone can improve the accuracy of hydrostatic table by using the algorithm.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.70-76
• /
• 2002

Effectiveness of corrective machining algorithm is verified experimentally in this paper by performing corrective machina work practically to single side and double sides hydrostatic tables. Lapping is applied as machining method. Machining information is calculated from measured motion errors by applying the algorithm, without information on rail profile. It is possible to acquire 0.13$\mu$m of linear motion error, 1.40arcsec of angular motion error in the case of single side table, and 0.07$\mu$m of linear motion error, 1.42arcsec of angular motion error in the case of double sides table. The experiment is performed by an unskilled person after he experienced a little of preliminary machining training. Experimental results show that corrective machining algorithm is very effective, and anyone can improve the accuracy of hydrostatic table by using the algorithm.

• 토지주택연구
• /
• 제3권1호
• /
• pp.79-82
• /
• 2012

While there exists a relatively large body of technical information for the engineered design of wood-frame buildings to resist seismic ground motions, the quantitative assessment of seismic resistance of conventional houses built by prescriptive requirements is less well understood. Forintek Canada Corp., in collaboration with other research and industry partners, has embarked on a research project to address this topic. This paper will report on the seismic shake table tests of a full-scale wood-frame building. The two-story specimen, $6m{\times}6m$ in plan, was built on the seismic shake table at Tongji University in Shanghai, China, according to Part 9 of the 1995 National Building Code of Canada and shaken uni-directionally in each of the two principal directions. Three different seismic table motions were applied at increasing peak ground motion amplitudes up to 0.40 and 0.50 g. The specimen was repaired after the above sets of seismic table motions, and successive runs were conducted for increased door openings. Measurements included specimen accelerations, displacements and anchorage forces. Static stiffness of the specimen was measured at low force levels, and natural frequencies were measured after each seismic loading stage by applying low-level random excitation. The results presented consist of the capacity spectra of the shake table tests, changes in specimen stiffness and natural frequencies with increasing seismic loading. These results and those from other recent shake table tests elsewhere will be compared with simplified engineering calculations based on codified values of strength, and on that basis preliminary conclusions will be drawn on the adequacy of the current code provisions and design guides in Canada and the USA for conventional wood-frame construction.

• 자동차안전학회지
• /
• 제10권1호
• /
• pp.45-51
• /
• 2018

There are some ambiguities of the information on the fuel economy provided to the consumers because the standard and the detailed regulations for the fuel economy of the two-wheeled vehicle have not been established in Korea. Since Korea has been a signatory of World Forum for Harmonization of Vehicle Regulations since 1998, it is possible to remove the ambiguities by adopting the WMTC (Worldwide-harmonized Motorcycle Test Cycle) measurement method for the fuel economy of the two-wheel vehicle. As a preliminary study on the WMTC mode fuel economy, road loads measured by coast down method and table method were compared for the two types of two-wheeled motorcycles on sales in domestic market. In the same model, it was confirmed that the deviation of WMTC mode fuel efficiency was below -5% between products. On the other hand, the difference of WMTC fuel economy exceeded 5% between the coast down method and table method.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권3호
• /
• pp.62-68
• /
• 2004

Effectiveness of a corrective machining algorithm, which can construct the proper machining information to improve motion errors utilizing measured motion errors, is verified experimentally in this paper, Corrective machining process is practically applied to single and double side hydrostatic bearing tables. Lapping process is applied as a machining method. The machining information is obtained from the measured motion errors by applying the algorithm, without any information on the rail profile. In the case of the single-side table, after 3 times of corrective remachining, linear and angular motion errors are improved up to 0.13 $\mu\textrm{m}$ and 1.40 arcsec from initial error of 1.04 $\mu\textrm{m}$ and 22.71 arcsec, respectively. In the case of the double-side table, linear and angular motion error are improved up to 0.07 /$\mu\textrm{m}$ and 1.42 arcsec from the initial error of 0.32 $\mu\textrm{m}$ and 4.14 arcsec. The practical machining process is performed by an unskilled person after he received a preliminary training in machining. Experimental results show that the corrective machining algorithm is very effective and easy to use to improve the accuracy of hydrostatic tables.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.3849-3855
• /
• 2011

본 연구에서는 배당을 중심으로 한 기업의 성장가능성을 평가하여 효율적 포트폴리오를 선택하는 전략을 제시한다. 이를 위해 선행실험을 통해 양질의 성장주를 가려내기 위한 4 개의 범주(category)를 선정하고, 각 범주별 점수 산출식을 포함하는 스코어링 테이블을 개발하였다. 스코어링 테이블에 의해 구성된 포트폴리오의 효과를 보이기 위해 한국거래소에 상장된 KOSPI 및 KOSDAQ의 927개 주식을 대상으로 2007~2010년의 4년 동안 매해 3 그룹의 포트폴리오를 구성하였고, 각 포트폴리오의 수익률을 시장수익률과 비교 분석을 실시하여 그 성능을 입증하였다.

• 약학회지
• /
• 제5권1호
• /
• pp.31-36
• /
• 1960

The importance of enteric coating technique among the pharmaceutical firms has recently risen very significantly. This study of enteric coating bases was made in order to determine the most suitable bases and dusting powders. Materials and equipment used in this experiment are shown in table 1 and kinds of enteric coating bases and their formulas are shown in table 2. The evaluation of the suitability for enteric coating bases and dusting powder was made by disintergration test after measuring the thickness of the enteric coated layer as shown in the tables 4 and 5. Based on the results of this study, the base D(shellac 20 Gm, anhydrous lanoline 5 Gm, 96% alcohol 75 ml) and the base E (shellac 10 Gm, cetyl alcohol 10 Gm. acetone 80 ml) are selected among the 8 kinds of bases studied in a preliminary test and it was found that Mg-stearate and CA-stearate were in most suitable dusting powders among the 6 kinds studied for the bases D and E. Further study on base D and E was carried out by varying the proportions of the materials which were the original constituents of bases D and E. According to the result of this further study shown in table 6, the shellac 15 Gm cetyl alcohol 5 Gm Acetone 80 ml of base E is recommended as the most suitable dusting powder.

• 한국콘텐츠학회논문지
• /
• 제11권2호
• /
• pp.126-134
• /
• 2011

최근 많은 연구자들은 서로 다른 영역에 저장된 센서 데이터를 이용한 조인 질의에 관심을 갖고 있다. 기존 기법은 예비 조인 조정자가 센서 노드로부터 시놉시스를 수집하고, 조인 질의 처리에 필요한 센서 데이터를 결정한다. 기지국은 전체 데이터를 수집하는 대신 일부 센서 데이터를 수집하여 최종 조인 처리를 수행한다. 하지만, 예비 조인을 수행하는 과정에서 통신 오버헤드를 발생시키는 단점을 가지고 있다. 본 논문에서는 이와 같은 문제점을 해결하는 새로운 에너지 효율적인 인-네트워크 조인 기법을 제안한다. 제안하는 기법은 네트워크 내부에서 예비 조인 조정자를 선정한다. 예비 조인 조정자는 조인의 초기 단계에서 조인 결과에 포함되지 않는 데이터를 제거하고 센서 데이터의 압축을 수행한다. 기지국은 압축된 데이터의 일부와 데이터 압축을 위한 인코딩 테이블을 수집하고 조인 결과를 결정한다. 그 결과, 제안하는 기법은 예비 조인 처리를 위한 통신 비용을 줄이고 네트워크 수명을 연장시킨다.