• Journal of Korea Technology Innovation Society
• /
• v.11 no.2
• /
• pp.287-313
• /
• 2008

Even though the pre-feasibility study was introduced in 1998, it mainly has focused on transportation social overhead capital(SOC) such as road and railroad. Last year, however, the government newly launched R&D project area for the pre-feasibility study. This paper tries to analyze the pre-feasibility study methodology and system that applied to R&D facility, cluster, and sized R&D infrastructure projects. In depth study of economic, policy, and AHP analysis, this paper shows that the preliminary feasibility study have some caveats and suggests a way of improvement for making up for limitation. Main suggestions are as follows; First, to improve the fit in R&D sector analysis, using consistent method is important. Second, technology analysis is essential for R&D evaluation. Third, technology experts should take part in AHP analysis.

• Journal of Biomedical Engineering Research
• /
• v.38 no.5
• /
• pp.264-270
• /
• 2017

A Doppler radar sensor was applied to detect respirations and heartbeats of persons who were lying on a bed. This study is preliminary study aiming at non-contact and non-intrusive respiration and heart rate monitoring during sleep in daily life. For the experiments, 10GHz Doppler radar with patch-type antenna was used and installed on the upper right and the distance between the body and the antenna was 1 m. The results show that each signal of respiration and heartbeat is observed in each frequency band however the frequency band and the waveform vary according to the subjects and the posture. The results show that the heartbeats can be detected with the peak detection in some frequency band. This study shows the feasibility of applying the Doppler radar to detection of heartbeat and respiration during sleep and further studies about heartbeat detection algorithm are required.

• Smart Structures and Systems
• /
• v.4 no.5
• /
• pp.565-582
• /
• 2008

This paper presents a feasibility study of flexible piezoelectric paint for use in wide-band low-profile surface-mount or embeddable ultrasonic sensor for in situ structural health monitoring. Piezoelectric paint is a piezoelectric composite with 0-3 connectivity. Because of its ease of application, piezoelectric paint can be readily fabricated into sensing element with complex pattern. This study examines the characteristics of piezoelectric paint in acoustic emission signal and ultrasonic guided wave sensing. A series of ultrasonic tests including pitch catch and pencil break tests were performed to validate the ultrasonic wave sensing capability of piezoelectric paint. The results of finite element simulation of ultrasonic wave propagation, and acoustic emission generated by a pencil lead break on an aluminum plate are also presented in this paper along with corresponding experimental data. Based on the preliminary experimental results, the piezoelectric paint appears to offer a promising sensing material for use in real-time monitoring of crack initiation and propagation in both metallic and composite structures.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1227-1232
• /
• 2007

The objective of this study is to develop qualification analysis preliminary frame for railway personal injury accident. In this research, we develop accident scenarios to analyze systematically and evaluate quantitatively fatality accident scenarios for railway personal. The accident scenario analysis first identifies the hazardous events and explains the hazardous conditions that surround the accident and cause railway accidents. This method includes a feasibility test, a clustering process and a pattering process for a clearer understanding of the accident situation. Since this method enables an accident scenario analysis to be performed systematically as well as objectively, this method is useful in building better accident prevention strategies. Therefore, this study could serve to reduce railway accidents and could be an effective tool for a hazard analysis.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.38-39
• /
• 2008

KEPCO conducted the project called the "Feasibility Study for the Han (Ghana) - Bobo Dioulasso (Burkina Faso) - Bamako (Mali) Interconnection Project" as its first African project. This paper deals with power system analysis and Transmission line and substation design of approximately 750 kilometers of the 225 kV single circuit transmission lines and six substations. The main contents of the power system analysis results and preliminary engineering design include power flow, transient stability, eigenvalue analysis, transmission line design, substation design and economic analysis.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.14 no.2
• /
• pp.88-95
• /
• 2018

In this study, to enhance the seismic performance of nuclear power plants (NPP), a small laminated rubber bearing (LRB) is chosen as a seismic design option of the vulnerable equipment. Prior to the application of equipment base isolation, it is necessary to review the feasibility that the technique contributes enough to the seismic performance of NPP by analysis. At first, some preliminary design of small LRBs for equipment is carried out. Design parameters such as horizontal and vertical stiffnesses, design natural frequencies are checked by calculation and analysis for the four design options considering various upper weights. Performance test of small LRB is to be carried out to verify static performance using the results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.73-78
• /
• 1990

As a preliminary study for the application of robots in electrical power company, several case studies in foreign countries, such as a substation patrol robot, a robot for nuclear power facilities, an insulator cleaning robot and a robot system for live-distribution line works, have been carried out for the application of robots. Various application fields, application-related problems, technical difficulties, and the feasibility of applications are studied.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1093-1100
• /
• 2014

The goal of this paper is to investigate preliminary the applicability of 3D printing technologies for the development of the hot bulk forming process and die. 3D printing technology based on the plastic material was applied to the preform design of the hot forging process. Plastic hot forging dies were fabricated by Polyjet process for the physical simulation of the workpiece deformation. The feasibility of application of Laser-aided Direct Metal Rapid Tooling (DMT) process to the fabrication of the hot bulk metal forming die was investigated. The SKD61 hot-working tool steel was deposited on the heat treated SKD61 using the DMT process. Fundamental characteristics of SKD 61 hot-working tool steel deposited specimen were examined via hardness and wear experiments as well as the observation of the morphology. Using the results of the examination of fundamental characteristics, the applicability of the DMT process to manufacture hot bulk forming die was discussed.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.37 no.2
• /
• pp.14-26
• /
• 2024

Objectives : The purpose of this study is to assess the feasibility of conducting a study on traditional Korean medicine treatments for periodontal diseases, specifically gingivitis and mild periodontitis. Methods : This study will employ a randomized, controlled, parallel-group design. Subjects with gingivitis and mild periodontitis will be recruited in one university hospital. In total, 45 subjects will be randomized into three arms (Acupuncture therapy group, herbal mouthwash group and usual care group), and will be followed up for 4 weeks. We will assess clinical variables such as, pocket depth, bleeding on probing, gingival index, plaque index, visual analog scale, uroqol-5 dimensions-5 levels to analyze changes in microbial flora before and after the intervention. Results : The protocol for this study was approved by the Institutional Review Board (IRB) of Dongguk University Ilsan Oriental Medicine Hospital, and registered with the Korean Clinical Trial Registry on March 29, 2024. Conclusions : This study is the first clinical research on periodontal diseases conducted in a Korean traditional medicine institution. The research aims to broaden the scope of traditional Korean medicine and is expected to serve as crucial data for future large-scale studies.

• Bulletin of the Korean Space Science Society
• /
• 2005.04a
• /
• pp.69-69
• /
• 2005