• Steel and Composite Structures
• /
• v.21 no.4
• /
• pp.949-962
• /
• 2016

The braking hose in the automotive hydraulic braking system exhibits the complicated anisotropic large deformation while its movable end is moving along the cyclic path according to the steering and bump/rebound motions of vehicle. The complicated large deformation may cause not only the interference with other adjacent automotive parts but also the durability problem resulting in the fatal microcraking. In this regard, the design of high-durable braking hose with the interference-free layout becomes a hot issue in the automotive industry. However, since it has been traditionally relied on the cost-/time-consuming trial and error experiments, the cost- and time-effective optimum design method that can replace the experiment is highly desirable. Meanwhile, the hose deformed configuration and fatigue life are different for different hose cyclic paths, so that their characteristic investigation becomes an important preliminary research subject. As a preliminary step for developing the optimum design methodology, we in this study investigate the hose deformed configuration and the fatigue life for four representative hose cyclic paths.

• Water for future
• /
• v.17 no.4
• /
• pp.293-302
• /
• 1984

The tidal and meteorological condition associated with wintertime surges in the Ease China Sea are described. The vertically-integrated finite difference model of the East china Sea have been used to investigate the surges generated during a period of 5 days in November, 1983 dynamically. Computed residual elevations are compared with hourly records form selected tide gauges along the west coast of Korea. Preliminary results on circulation pattern derived from the numerical model are presented and discussed. Further refinement of the model using current meter observation is presently being performed to provide more accurate information on bottom stress distribution.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.147-152
• /
• 2005

The exhaust system of automobile is faced with random or spectrum types of fatigue loads during usage life and so needs to be closely estimated for quality and performance to have enough certainty on design endurance lift during preliminary design process. Structural operation conditions, operation load history, property of material and manufacturing process etc. should be considered by performing experiment approach. Using the software program for predicting fatigue life quickly and exactly in preliminary design stage saves plenty of time and cost generated by fatigue tests. In this paper, fatigue life prediction was performed on the basis of fatigue analysis using MSC/FATIGUE and load data from field test and the life of development items was estimated and compared through the results.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.2
• /
• pp.105-111
• /
• 2010

The purpose of this study was to detect early children with hyperactivity which is one of the symptoms of Attention Deficit-Hyperactivity Disorder (ADHD). This study used two methods: K-CBCL and observation of children's behavior. K-CBCL was done online by parents at home. For observation of children's behavior, the school asked children to wear a 3-axis accelerometer on their wrists. The data from K-CBCL and 3-axis accelerometer were analyzed and clustered to separate hypersensitive children from ordinary children. This experiment confirmed that 3-axis accelerometer which is one of Ubiquitous techniques and the K-CBCL questionnaire were helpful for detection of hypersensitive children.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.8
• /
• pp.1117-1127
• /
• 2002

This paper is on the luster property of fertile fabric materials which is one of the important factors related to the development of clothing materials leading to the value-added products. Using several image analysis techniques, the optical properties, especially luster related ones, of the commercially available fabrics were measured and analyzed. The fabric samples included 6 kinds of preliminary experimental fabrics along with 22 kinds of fabric which were commercially available. The images acquired at various observing angles are taken by 44 Points and these Pictures are analyzed into luster through the image analysis program. The preliminary experiment demonstrated the effects of weave types and the number of yarn twist on the luster of the fabrics through the use of the image analysis program.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.35-41
• /
• 2018

In this paper, we propose a swarm-based possibilistic c-means(PCM) algorithm in order to overcome the problems of PCM, which are sensitiveness of clustering performance due to initial cluster center's values and producing coincident or close clusters. To settle the former problem of PCM, we adopt a swam-based global optimization method which can be provided the optimal initial cluster centers. Furthermore, to settle the latter problem of PCM, we design an adaptive thresholding model based on the optimized cluster centers that yields preliminary clustered and un-clustered dataset. The preliminary clustered dataset plays a role of preventing coincident or close clusters and the un-clustered dataset is lastly clustered by PCM. From the experiment, the proposed method obtains a better performance than other PCM algorithms on a simulated magnetic resonance(MR) brain image dataset which is corrupted by various noises and bias-fields.

• Korean Journal of Poultry Science
• /
• v.22 no.3
• /
• pp.133-144
• /
• 1995

One metabolism trial(Experiment I) and another respiration trial(Experiment II) were conducted to investigate the effects of dietary fiber supplementation(20% wheat bran) on the water balance, blood acid-base balance, body temperature, and metabolic rate of heat-stressed adult roosters. In Experiment I, twenty 20-wk-old SCWL roosters(BW 1.6 kg) were randomly alloted to 4 treatments with 5 birds per treatment and one per replicate. The 4 treatments were consisted of two temperature(21~22˚C vs. 34~35˚C) and two dietary fiber treatment(0% and 20% wheat bran), making Experiment I a 2x2 factorial. After 4 d of preliminary period, birds we subjected to 3-d collection period. Sixteen 20-wk-old SCWL roosters(BW 1.6 kg) were employed Experiment H, with two temperature(21~22˚C vs. 34~35˚C) and two wheat bran levels(0% and 20%). Brids were housed in individual metabolism cages under normal temperature(21~22˚C), at fed one of the experimental diet. After 4 d of preliminary period, a respiration trial with open-circuit gravimetric respiratory apparatus was carried out for each bird for 6 h, one by one, normal(20~21˚C) and hot(34~35˚C) temperatures. The ANOVA test and comparisons among treatment means were done at 5% probability level for both experiments. Results obtained from Experiment I and, II were summarized as follows, 1.The amounts of DM intake and excretion were significantly(P<.05) decreased by heat stress. The DM intake was not affected by the addition of 20% wheat bran, however, the amount of DM excretion was significantly increased by the high fiber diet. Thus, the DM metabolizability decreased significantly by the addition of 20% wheat bran. 2. The heat-stressed roosters increased the water intake and excreta moisture content significantly. Although not significant, the water intake tended to increase in roosters fed the 20% wheat bran diet. 3. The amounts of total water input and evaporative water loss were increased significantly by heat stress, and the addition of 20% wheat bran did not exert any influence on the total water input and evaporative water loss. However, roosters fed the 20% wheat bran diet increased the excreta water output significantly. 4. Neither the heat stress nor the dietary fiber did affect the blood pH, pCO2, and HCO$_3$- significantly. 5. The body temperature increased significantly by the heat stress. However, the high fiber deit failed to decrease the body temperature. 6. The heat-stressed roosters decreased the 02 consumption and C0$_2$ production, and increased the evaporative water loss significantly. However, the high fiber diet did not exert any infulence in this regard. It appears that the beneficial effect, if any, of high fibrous diet during heat stress episode may be due to the increased heat loss through the enhanced excreta water.

• 대한공업교육학회지
• /
• v.42 no.2
• /
• pp.47-66
• /
• 2017

As the necessity of humanistic education has recently been socially emphasized, aptitude and character test has been conducted in the stage of training instructors to focus on making them equipped with proper ability of humanistic education. Especially, considering characteristics of students in specialized high schools with stronger negative concept of ego along with higher proportion of students looking for job in early ages compared to regular high schools, instructors in specialized high schools need to pay more attention on humanistic education of students compared to those in regular high schools. Therefore, this study has developed social emotion learning (SEL) of preliminary teachers in specialized high schools and analyzed the influence of developed programs on characters in teaching positions of preliminary instructors in specialized high schools. In this study, ADDIE model has been used developing SEL programs, and developed programs were comprised of total six sessions. Social emotion learning has been performed on 27 preliminary teachers in experiment group, and regular academic education courses were given on 30 preliminary teachers in control group. At this time, as for class contents, 'self-recognition' has been dealt with in the first and second sessions followed by 'self-management' in the second and third sessions, 'adjustment in relationship' in the fourth session, 'responsible decision making' in the fifth session, and 'personal relationship' in the sixth session. Classes have been conducted for 90 minutes in average. Since intentional sampling method has been used in this study, difference of pre-scores between groups might influence on the difference on post-scores. Therefore, ANCOVA that adjusted the pre-scores to be consistent has been utilized. As a result, there was a significant difference on the post-scores in characters in teaching positions between experiment group and control group.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1430-1434
• /
• 2005

We conducted two experiments to assess the effect of transfer from housing to grazing on stress hormone secretion in cattle using urine samples. In a preliminary experiment, urine samples were collected following an adrenocorticotrophic hormone (ACTH) challenge, and cortisol levels in urine were compared with the levels in plasma. In a second experiment, urinary cortisol was measured before and after the start of a grazing season in 6 Japanese Shorthorn cows, all of which had experienced grazing before. In experiment 1, urinary cortisol showed a pattern of changes similar to that of plasma with a 0.5-h temporal lag time, and the peak levels were 4 to 10 times higher than the basal levels. In experiment 2, the urinary cortisol levels in cows did not change after the cows were let out to pasture, with no decreases in body weight. This study suggests that the transfer from housing to grazing did not affect physiological responses to cause high excretion of urinary cortisol in grazing-experienced cattle using a non-invasive sampling method.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.46-51
• /
• 2020

The purpose of this study was to analyze the change in tensile strength characteristics of the weld when the welding speed and rotational speed of the tool, which are representative variables of the friction stir welding process. The equipment used in the experiment was Machining Center No. 5. The material used in the experiment is an AA6061-T6 alloy, and a rolled plate with a thickness of 2mm was used. Two experimental variables were selected, the welding speed of the tool and the rotational speed of the tool. The experimental conditions were selected in the range in which a healthy weld could be obtained through a preliminary experiment. The welding speed of the tool was increased to 100mm/min, 200mm/min, and 300mm/min, and the rotational speed of the tool was increased to 1000rpm, 2000rpm, and 3000rpm. As a result of the experiment, the tensile strength increased as the rotational speed of the tool changed at each tool welding speed. In addition, as the welding speed of the tool increased, the tensile strength of the weld was increased. The condition with the highest tensile strength of the weld was found to be a tool feed speed of 300 mm/min and a tool rotation speed of 3000rpm.