• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.336-339
• /
• 2006

In this paper, the preliminary transfer orbit analysis results for the COMS mission were presented. As the first step of transfer orbit analysis, the preliminary analyses of LAE burn strategy, geometrical visibility, and launch window were performed. For the analysis process, all launcher nominates were divided into three groups according to the declination of LAE thrust angle. So, the three launch cases were assigned as the representative launcher of each group, respectively. They are Ariane-5, Atlas summer and winter launch cases. And all analyses were performed at the representative launcher of each group. One nominal and three back-up plans were considered for the establishment of LAE burn strategy. And for geometrical visibility analysis, four TT&C ground stations were considered. Finally, the preliminary launch window analysis was performed about the duration of one year from the first day of September 2008. The analysis results show that the all launch cases comply with the transfer orbit operation requirements.

• 한국방재안전학회논문집
• /
• 제14권3호
• /
• pp.1-16
• /
• 2021

최근 기후변화로 인한 수자원 확보의 불확실성과 생태환경의 변화에 따라 안전성과 공공성을 고려한 수자원 분야에 대형 사업이 요구된다. 이러한 대형 사업가운데 예비타당성사업에 해당되는 사업은 국가예산낭비 예방의 목적으로 경제성분석과, 정책성분석, 지역균형발전 분석에 기반한 종합분석에 의하여 사업추진이 결정된다. 그러나 대부분 예비타당성분석에 의한 결과는 경제성분석에 크게 의존하는 경향을 보여 비수도권 지역에서는 예비타당성조사를 통과하지 못하는 경우가 있었다. 이러한 점을 보완하기 위해 한국개발연구원에서는 정책성분석의 비중을 높게 두는 수자원부문 사업의 예비타당성조사 표준지침을 수정하였다. 따라서 본 연구에서는 기존 수행된 예비타당성조사에 대한 사례를 분석하고 수자원부문 사업의 예비타당성조사에서 정책성분석의 방향을 제시하는 것이 목표이다. 이에 지난 2002년부터 2019년까지 18년간 수행된 수자원분야 예비타당성 사례조사를 수행하였고, 경제성분석에 포함되지 않는 편익항목을 이용하여 정책적효과 분석방안을 제시하였다.

• 전기학회논문지
• /
• 제66권9호
• /
• pp.1379-1384
• /
• 2017

To guarantee safety and reliability, RAMS(Reliability Availability Maintainability and Safety) activity for a communication software in train communication network is studied. In this paper, preliminary hazard analysis in RAMS activities is studied for the communication software. Preliminary hazard analysis is done through library for communication software that the specification is defined by IEC 61375. The hazards are defined, then causes and consequence for each hazard are defined. The total 36 preliminary hazards are classified. For high severity hazards are changed to acceptable level by upgrading of system requirement specification.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.97-103
• /
• 2015

To achieve the safety and reliability, RAMS activity for a railway signal system of Near Surface Transit is studied. In this paper, preliminary hazard analysis in RAMS activities is studied for the railway signal system of Near Surface Transit. Preliminary hazard analysis is done through automatic train protection, automatic train operation and automatic train supervision. The hazards are defined, then causes and consequence for each hazard are defined. The total 75 preliminary hazards are classified. For high severity hazards are changed to acceptable level by upgrading of system requirement specification.

• 한국지진공학회논문집
• /
• 제26권1호
• /
• pp.31-38
• /
• 2022

Based on the nonlinear static analysis and the approximate seismic evaluation method adopted in "Guidelines for seismic performance evaluation for existing buildings, two methods to calculate strength demand for retrofitting individual structural walls in unreinforced masonry buildings are proposed." The displacement coefficient method to determine displacement demand from nonlinear static analysis results is used for the inverse calculation of overall strength demand required to reduce the displacement demand to a target value meeting the performance objective of the unreinforced masonry building to retrofit. A preliminary seismic evaluation method to screen out vulnerable buildings, of which detailed evaluation is necessary, is utilized to calculate overall strength demand without structural analysis based on the difference between the seismic demand and capacity. A system modification factor is introduced to the preliminary seismic evaluation method to reduce the strength demand considering inelastic deformation. The overall strength demand is distributed to the structural walls to retrofit based on the wall stiffness, including the remaining walls or otherwise. Four detached residential houses are modeled and analyzed using the nonlinear static and preliminary evaluation procedures to examine the proposed method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.197.2-197.2
• /
• 2011

Preliminary analysis on the modeling conditions and the simulation results is conducted only to evaluate the correctness of the simulation configuration further to apply for the LASGIT project. Except for the unrealistic modeling conditions for the relations of capillary pressure and relative permeability against water saturation used previously, the simulation results successfully demonstrate Helium propagation typical for two-phase flow. Further elaborated simulation with more realistic parameters should complete the weak points of the preliminary work.

• 웰빙융합연구
• /
• 제6권1호
• /
• pp.23-31
• /
• 2023

Purpose: The purpose of this study is a preliminary study to develop a comprehensive information avoidance scale that includes various search contexts. Research design, data and methodology: This study is a part of exploratory sequential design of mixed method for the development of information avoidance scale. Based on the themes derived from the analysis of the in-depth interview data collected in the qualitative research of the first stage of the study, 45 preliminary items on information search and avoidance were constructed. The factors related to information searching included information recognition, information seeking purpose, and information search expectations. Individual, information, time, and system factors were related to information avoidance. Pearson's correlation analysis was performed for the correlation between factor items, and Cronbach's alpha analysis was performed for the reliability analysis of the items. Exploratory factor analysis was applied to examine the construct validity of 35 items of information avoidance. Results: Among the information avoidance items, one of the less relevant among information purpose items, two information factor items, and one time factor item were excluded. Conclusions: A secondary survey should be conducted to confirm the validity and reliability of the scale composed of adjusted items (35) based on the results of exploratory factor analysis. The strength of this preliminary scale is that it was developed based on vivid qualitative data of ordinary people who had experiences of search and avoidance in various search contexts.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.649-654
• /
• 2001

This paper describes aerodynamic preliminary design performance prediction and flow analysis for centrifugal compressor of the marine middle engine turbocharger. The performance characteristics of turbocharger compressor are investigated at various operating conditions using mass flow rate and revolution speed, and computational flow analysis for impeller and diffuser at design point are performed. Preliminary design results correspond to actual compressor geometric values comparatively by applying modified slip factor. Performance prediction and flow analysis results show good agreement with experiments. Therefore, this will provide the performance prediction in preliminary design, and help to increase the design capability for optimized impeller.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.670-675
• /
• 2001

This paper describes aerodynamic preliminary design performance prediction and flow analysis for turbine of the marine middle engine turbocharger. The performance characteristics of turbocharger turbine are investigated at various operating conditions using mass flow rate and computational flow analysis for rotor and nozzle at design point are performed. Preliminary design results are performed by applying mean line and radial equilibrium theory. Performance prediction and flow analysis results show good agreement with experiments. From 3 dimensional flow analysis result, efficiency is 0.6% greater than design point. Therefore, this design approach is useful for preliminary design, and helps to increase the design capability for optimized rotor blade.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권7호
• /
• pp.735-743
• /
• 2015

유기랭킨사이클의 열역학적 효율에 큰 영향을 미치는 구성요소는 터빈이다. 일반적으로 유기랭킨사이클에서 팽창과정은 작동유체의 급격한 물성치 변화를 수반하므로 터빈의 설계에 많은 어려움이 따른다. 그러므로 효율이 우수한 터빈의 개발을 위해서는 정밀한 터빈의 예비설계가 요구된다. 반경류터빈의 효율은 loading과 flow 계수에 큰 영향을 받으므로 터빈의 예비설계에서 이러한 변수의 선정이 매우 중요하다. 그러나 기존의 성능곡선으로부터 loading과 flow 계수를 선정하는 고전적인 방법을 이용할 경우 정밀한 예비설계를 기대하기 힘들다. 그러므로 본 연구에서는 로터 깃의 개수와 열역학적 설계조건으로부터 loading과 flow 계수를 산출하는 방법을 제시하였다. 본 연구에서 제시한 예비설계모델을 이용하여 예비설계를 수행한 결과는 공신력 있는 상용예비설계프로그램을 이용한 결과와 비교하여 만족스러운 것을 확인하였다. 또한 예비설계모델의 정확성을 검증하기 위해 예비설계한 반경류터빈에 대한 수치해석을 수행하였으며 효율을 제외한 대부분의 변수들이 예비설계조건을 비교적 충족하는 것을 확인하였다.