• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.33-37
• /
• 2004

Since the preflex beam is fabricated by welding, the pre-compressive stresses that should occur over the concrete pier are diminished by the welding residual stresses. For this reason distribution of welding residual stresses must be analyzed accurately and welding residual stresses should be relieved during the fabrication. In this study strain history, displacement of beam and re-distributed welding residual stresses by different loading conditions are measured and compared to choose more appropriate preflex condition.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.433-441
• /
• 2004

This paper presents a strategy for the quality assurance of the continuous preflex composite girder bridge through the camber management of the girder during construction. The construction stages which require welding, balanced preflexion loads at the ends, etc. may cause unexpected large deformation to the preflex girder. Furthermore, these defects can be detected by measurements and analyses of the girder behavior which is sometimes time consuming. In the present study, preflex girder's camber data at equally spaced nodes in each construction stage are obtained and analyzed for the quality control of thee span continuous preflex girder composite bridge.

• 한국해양공학회지
• /
• 제18권2호
• /
• pp.52-57
• /
• 2004

Preflex beam is a method of construction designed to hold the pre-compressive stresses over the concrete pier by the preflexion load. During the fabrication of the girder, welding causes residual stresses. The welding residual stresses must be relieved in order to generate the accurate compressive pre-stresses. In this study, to determine the thermal distribution characteristics on the girder by welding, both three-dimensional finite element analysis and two-dimensional finite element analysis, in a quasi-steady state, is carried out. After comparing each result between the three-dimensional analysis and the two-dimensional analysis, finite element analysis is carried out against the actual girder, and the welding thermal distribution characteristic over the preflex beam is analyzed. It is possible to provide the input data for the analysis of the welding residual stresses.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.329-334
• /
• 2002

Preflex beam is a method of construction to hold the Pre-compressive stresses over the concrete pier by the Preflexion load. During the fabrication of the girder, welding causes the welding residual stresses. The welding residual stresses must be relieved to generate the accurate compressive pre-stresses that is designed. On this study, to find out the thermal distribution characteristics on the girder by welding, both the three-dimensional finite element analysis and the two-dimensional finite element analysis in a quasi-steady state is carried out. After comparing with each result between the three-dimensional analysis and the two-dimensional analysis, finite element analysis is carried out against the actual girder and analyze welding thermal distribution characteristic over the preflex beam and obtain the input data for the analysis of the welding residual stresses.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권1호
• /
• pp.72-80
• /
• 2015

본 연구에서는 총 10가지 다양한 컨테이너 활하중 분포에 따른 콘크리트 부유식 컨테이너 터미널 하부슬래브의 휨응력분포와 변위분포를 비교분석하였다. 또한, 대상구조물의 구조성능과 거동을 수치해석적으로 검토하였다. 활하중 분포에 따른 구조성능 검토결과 3가지 하중분포 (A, B, D-type)는 인장거동을 보이며, 그 외의 7가지 하중분포 (C, E, F, G, H, I, J-type)에서는 압축거동을 나타내었다. 특히, D, F-type에서는 과도한 압축응력이 발생하였으며, 부력 프리플랙션 제어를 통하여 압축응력을 저감할 수 있을 것으로 사료된다. 활하중 분포에 따른 구조거동 검토결과 B, E, F, I-type에 대한 부유구조체의 기울기가 메가플로트 기준을 초과하였으며, 이와 같은 하중분포는 컨테이너 적하 시에 회피해야 될 것으로 판단된다. 종합적으로, 부유식 컨테이너 터미널에 관련된 기준 및 연구가 많지 않은 현실을 감안할 때, 본 연구는 컨테이너 터미널의 구조성능 및 거동을 검토를 위한 초석이 될 것이며, 사용 가이드라인으로 활용이 가능할 것으로 판단된다.