• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.488-499
• /
• 1996

SMC(Sheet molding compound) is a thermosetting material reinforced with chopped fiberglass. The compression molding of SMC was analyzed based on a rigid thermo-viscoplastic approach using a three dimensional finite element program coupled with temperatures. Only the temperature analysis part was tested in this paper by solving one-dimensional heat transfer problem and comparing with the exact solutions available in the literature. Based on this comparison the program was proved to be valid and was further applied in solving compression molding of SMC between flat dies. To investigate the usefulness of a rigid thermo-viscoplastic approach in the compression molding analysis of SMC charge, compression of rectangular shaped SMC charge at plane strain and three dimensionalde formation condition was analyzed under the same condition as given in the literature. From this comparison it was found out that the rigid thermo-viscoplastic approach was useful in analyzing SMC compression molding between flat dies.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.95-101
• /
• 2004

Dynamic behavior of diffusive-thermal instability in diluted $CH_4/O_2$ diffusion flames is numerically investigated by adopting detailed chemistry and transport. Counterflow diffusion flame is adopted as a model flamelet. Particular attention is focused on the pulsating-instability regime, which arises for Lewis numbers greater than unity, and the instability occurs at high strain rate near extinction condition in this flame configuration. Once a steady flame structure is obtained for a prescribed value of initial strain rate. transient solution of the flame is calculated after a finite amount of strain-rate perturbation is imposed Oil the steady flame. Transient evolution of the flame depends on the initial strain rate and the amount of perturbed strain rate. Basically, the dynamic behaviors can be classified into two types, namely non-oscillatory decaying solution and diverging solution leading to extinction. The peculiar oscillatory solution. which has been found in the previous study adopting one-step chemistry and constant Lewis numbers, is not observed in this study, which is attributed to both convective flow and preferential diffusion effects.

• 수산해양기술연구
• /
• 제39권4호
• /
• pp.291-297
• /
• 2003

Al-brass is usually used as the tube material of vessel's heat exchanger for seawater cooling system because it has high thermal conductivity and good mechanical properties and high corrosion resistance due to cuprous oxide (Cu20) layer against seawater. However, Al-brass tubes of heat exchanger for vessel at the actual environment is reported that local corrosion such as stress corrosion cracking occurred by synergism effect between mechanical factor and corrosion environment In this paper, the effect of corrosion environment on the stress corrosion cracking of Al-brass in various NH4OH of 3.5% NaCl solution, under flow by constant displacement tester. Based on the test results, the behavior of polarization, stress corrosion crack propagation and dezincification phenomenon of Al-brass are investigated. The main results are as follows：(1) Increasing range of potential from open circuit potential to repassivation gets lower, as the contain rate of NH4OH gets higher. (2) As contain rate of NH4OH gets higher, SCC of Al-brass is become activation but the protection film(Cu20) of Al-brass is created in 3.5% NaCl solution. (3) According as content of NH4OH increases in 3.5% NaCl solution, the dezincifiction area is spread. It is concluded that dezincification occurred by localized preferential anodic dissolution at stress focusing region.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2007년도 춘계학술대회
• /
• pp.33-40
• /
• 2007

The Customs Administration, unlike other administrative service, should respond to constantly changing external environment. The Customs has to actively adapt itself to government policy changes, economic changes and international environment changes to facilitate the flow of trade logistics and maintain trading relations wi th other countries. The purpose of this paper is to explain policy directions of the Korea Customs Service which enforces various policies related to tariff and non-tariff barrier elimination for the trade liberalization while the Korean government is pursuing FTAs on a multi-track basis. This paper aims to seek ways to apply FTA policies to the Korean society and economy in a smooth manner. First of all, this paper examines changes in Customs administration brought by the proliferation of FTAs to such areas as FTA negotiations, import/export management, duties and taxes collection, drawback reduction/exempt ion of duty application area of preferential tariff rate and country of origin management. Then, the paper sets FTA missions of "supporting Customs Administration to lead the new trend of free trade environment" after analyzing the environment changes. To achieve the FTA mission mentioned above, the KCS designated 4 strategies and 40 implementation tasks. The 4 strategies are named "4C Strategies" taking initial letters from Client-oriented, Customized procedures, Cooperation and Constitution. "4C" also refers to Foresee(strategies to foresee the successful establishment of FTA policies) or For C(Customer or Customs). The KCS will continue to create new tasks through various channels and monitor their implementation process, and to help FTA regime successfully take root in Korea.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.128.2-128.2
• /
• 2010

For stationary 1kW-class fuel cell systems to be used widely, it is essential to achieve dramatic improvements in system durability as well as cost reduction. In order to address this engineering challenge, it is important to develop innovative technologies associated with BOP components. According to this background, in 2009, the Korean Government and "Korea Institute of Energy Technology Evaluation and Planning(KETEP)" launched into the strategic development project of BOP technology for practical applications and commercializations of stationary fuel cell systems, named "Technology Development on Cost Reduction of BOP Components for 1kW Stationary Fuel Cell Systems to Promote Green-Home Dissemination Project". The objectives of this project are to develop fundamental technologies to meet these requirements, and to improve the performance and functionality of BOP components with reasonable price. The project consortium consists of Korea's leading fuel cell system manufacturers, BOP component manufacturers which technologically specialized, and several research institutions. This paper is to provide a summary of the project, as well as the achievements made through the 1st period of the project(2009~2010). Several prototypes of BOPs - Cathode air blowers, burner air blowers, preferential oxidation air blowers, fuel blowers, cooling water pumps, reformer water pumps, heat recovery pumps, mass flow meters, valves and power conditioning systems - had been developed through this project in 2010. As results of this project, it is expected that a technological breakthrough of these BOP components will result in a substantial system cost reduction.

• 한국결정성장학회지
• /
• 제15권1호
• /
• pp.10-15
• /
• 2005

Microwave plasma CVD 다이아몬드/Ti 박막 성장 시 CH₄/H₂ 가스의 유량비율, chuck bias, microwave power 등이 다이아몬드 박막의 구조적 특성과 입자밀도에 미치는 영향에 대하여 조사하였다. 2∼3 CH₄ Vol.% 조건일 때 sp³-결합성의 탄소 neutral 들이 우선적으로 형성되고 sp²-결합성의 탄소 neutral 들이 선택적으로 제거됨에 따라 양질의 다이아몬드 박막을 얻을 수 있었으며, 다이아몬드 입자 증착 기구를 해석하였다. Ti 기판에 걸어준 negative chuck bias가 증가함에 따라 다이아몬드 핵생성이 증진되어 다이아몬드 입자 밀도가 증가하였고, 임계 전압은 약 -50V 임을 확인하였다. 또한, microwave power가 증가함에 따라 미세결정질(micro-crystalline) graphite 층 생성이 제어되고 다이아몬드 층이 형성됨을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.89.1-89.1
• /
• 2011

According to green growth's policy, green-home dissemination's projects are promoting. Among them, stationary fuel cell systems are receiving attention due to high efficiency and clear energy. But it need absolutely to develop cost down technologies and improve system durability for commercialization of the fuel cell system. To achieve this objectives, in 2009, the Korean Government and "Korea Institute of Energy Technology Evaluation and Planning(KETEP)" launched into the strategic development project of BOP technology for practical applications and commercializations of stationary fuel cell systems, named "Technology Development on Cost Reduction of BOP Components for 1kW Stationary Fuel Cell Systems to Promote Green-Home Dissemination Project". This paper introduces a summary of improved BOP performances that has been achieved through the 2nd year development precesses(2010.06~2011.05) base on 1st year development precesses(2009.06~2010.05). The major elements for fuel cell systems are cathode air blowers, burner air blowers, preferential oxidation air blowers, fuel blowers, cooling water pumps, reformer water pumps, heat recovery pumps, mass flow meters, electrical valves, safety valves and a low-voltage inverter. Key targets of those elements are the reduction of cost, power consumption and noise. Invert's key targets are development the low -voltage technologies in order to reduce the number of unit cell in fuel cell system's stack.

• 유기물자원화
• /
• 제16권1호
• /
• pp.46-52
• /
• 2008

자연계로 유출된 유류 및 유기용매 등 비수용성액체는 토양공극사이에 존재하며 서서히 용해되면서 지속적인 수질오염원으로 작용한다. 본 연구는 유리로 제작된 다공성매체 실험장치를 이용하여 토양 공극사이에 위치한 비수용성액체의 용해현상을 시각화하였고, 이미지 분석기술을 이용하여 용해속도를 정량화하였다. 다공성매체 공극사이 TCE는 물의 유량을 빠르게 할수록 용해속도가 증가하는 것으로 나타났다. 이는 TCE로 오염된 지역의 강우량이 많거나, 지하수 유속이 빠른 지역일 경우 토양내 TCE 제거는 용이하게 일어날 수 있지만, 용해된 TCE의 지하수 유입으로 증가한다는 점을 시사한다. 다공성매체 공극사이 TCE의 현미경 이미지 관측결과, 물의 유량이 빠른 경우 역시 TCE blob 수가 급격히 감소함을 확인하였다. 물의 흐름이 용이한 우선흐름경로에 존재하고 있는 TCE는 물과의 용이한 접촉으로 용해가 빠르게 진행되었다. 반면 정체구역에 존재하는 TCE의 용해속도는 매우 느리게 나타났다. 현장 토양에서도 동일한 현상이 일어날 것이므로 지하수 조사결과 TCE의 검출이 계속된다면, 토양 공극사이에 여전히 TCE가 존재하고 있음을 암시하므로 이에 대한 대책이 강구되어야 한다.

• 공업화학
• /
• 제20권4호
• /
• pp.423-429
• /
• 2009

본 연구의 목적은 바이오가스를 이용하여 고농도 수소 생산과 CO 제거가 가능한 글라이딩아크 플라즈마 개질 시스템의 개발이다. 이를 위하여 수성가스 전이반응기는 수증기 주입량 변화,촉매층 온도 변화에 대하여, 선택적 산화반응기는 촉매층 온도변화, 공기주입량에 대하여 실험을 진행하였다. 기준조건은 S/C 비 3, 촉매층 온도 $700^{\circ}C$, 전체가스량 16 L/min, 입력전력 2.4 kW, 바이오가스 구성비($CH_4$ : $CO_2$ ) 6 : 4이다. 이때의 실험결과는 HTS의 최적조건은 S/C비 3, 반응온도 $500^{\circ}C$, LTS의 최적조건은 S/C 비 2.9, 반응온도 $300^{\circ}C$이다. 또한 PROX I단의 최적조건은 각각 공기유입량 300 mL/min, $190^{\circ}C$, PROX II단의 최적조건은 공기유입량 200 mL/min, $190^{\circ}C$을 나타내었다. 반응기를 모두 지난 후의 합성가스는 $H_2$ 수율 55%, $CH_4$ 전환율 97%, $CO_2$ 전환율 97%, CO 선택도는 0%로 바이오가스를 개질하여 생성된 합성가스는 높은 수율을 나타내며, CO 선택도는 0%를 나타내었다.

• Nuclear Engineering and Technology
• /
• 제27권2호
• /
• pp.176-188
• /
• 1995

지하처분된 방사성핵종의 이동 해석방식으로서 입자추적법을 도입하였다. 입자추적법은 암반균열대와 같은 흐름장이 불균일하고 복잡할 때 물질이동을 모사할 수 있는 방법이다. 암반층에서 방사성핵종은 주로 암반사이에 발달한 균열을 따라 이동하는데, 초기연구자들은 균열틈을 평행판 사이의 간격으로 가정하였으나, 실제 균열은 이보다 복잡다양해서 실제 물질 이동과는 상당한 오차가 존재하였다. 이 논문에서는 이를 극복하기 위해 가변균열폭 국부통로모형을 도입하여, 균열대 내부는 2차원적인 균열폭의 분포를 가지며, 핵종은 균열내에서 상대적으로 큰 균열폭을 따라 이동이 주로 일어나는 국부이동이 라는 점을 제시하였다. 또한 개발한 이동모델의 타당성 입증차원에서 자연균열을 가진 화강암을 사용하여 방사성 핵종 이동 실험을 수행하였다. 추적자로서 지하수와 같은 이동특성을 가진 삼중수소와 요오드를 사용하였다. 화강암 균열대 특성을 파악하기 위해 균열이 있는 윗 암석면에 11개의 시추공을뚫고 수리전도 시험을 수행하였다. 실험자료와 전산모사치를 비교해 본 결과, 가변균열폭국부통로 개념에 물질이동모델로 입자추적법을 결합한 모델이 암반균열에서 핵종이동 해석방법으로 유용하였다. 또한 핵종은 균열 내에서 상대 적으로 큰 국부통로를 따라 주로 이동하며, 이동방향과 직각인 암반매질내로 확산도 상당한 비율로 일어났다.