• PNF and Movement
• /
• 제19권2호
• /
• pp.215-223
• /
• 2021

Purpose: This study aimed to compare the contraction ratios of the abdominal muscles and the preferential activation ratios of the transversus abdominis muscle (TrA) during the abdominal drawing-in maneuver (ADIM) in the hook-lying, sitting, and standing positions. Methods: This study included 30 healthy participants. The thicknesses of the TrA, internal oblique muscle (IO), and external oblique muscle (EO) were measured at rest and during the ADIM in the hook-lying, sitting, and standing positions using B-mode ultrasound imaging. The contraction ratios of these muscles and the preferential activation ratios of the TrA were calculated for each position. Results: The contraction ratio of the TrA and preferential activation ratio of the TrA during the ADIM in the hook-lying position were significantly higher than those in the sitting and standing positions (p < 0.05). The contraction ratio of the TrA during the ADIM in the sitting position was significantly higher than that in the standing position (p < 0.05). Conclusion: The hook-lying position tended to facilitate TrA activity better than the sitting position. Furthermore, the sitting position tended to facilitate TrA activity better than the standing position. These findings suggest that the ADIM in the hook-lying position should be implemented before that in the sitting position and that the ADIM in the sitting position should be implemented before that in the standing position.

• PNF and Movement
• /
• 제21권2호
• /
• pp.243-253
• /
• 2023

Purpose: This study aimed to investigate the effects of an abdominal drawing-in maneuver (ADIM) with a light load while sitting on transverse abdominis contraction in subjects with and without low back pain. Methods: In this study, 20 participants with chronic low back pain and 20 controls participated. Ultrasonography was used to assess the thickness of the external oblique (EO), internal oblique (IO), and transversus abdominis (TrA) muscles. Muscle thickness was measured at rest and during ADIM in three different sitting postures: (1) just sitting, (2) sitting loaded position (holding a 1 or 2 kg dumbbell in each hand), and (3) sitting loaded shoulder flexion position (holding a 1 or 2 kg dumbbell in each hand). Results: The contraction ratio (CR) and preferential activation ratio (PAR) of the TrA during ADIM had no significant interactional effect between the group and the sitting postures. However, the CR and PRA of the TrA during the ADIM showed significant differences among the three different sitting postures. The CR of the TrA during the ADIM in the sitting loaded shoulder flexion position was significantly increased compared to that in the sitting position (p<0.05). Moreover, the PRA of the TrA muscle during ADIM in sitting loaded and sitting loaded shoulder flexion positions was significantly higher than that in the sitting position (p<0.05). Conclusion: The findings suggest that ADIM in the sitting-loaded shoulder flexion position should be implemented to facilitate TrA activity.

• The Korean Journal of Ceramics
• /
• 제3권1호
• /
• pp.5-12
• /
• 1997

Charged carbon clusters which are formed by the gas activation are suggested to be responsible for the formation of the metastable diamond film. The number of carbon atoms in the cluster that can reverse the stability between diamond and graphite by the capillary effect increases sensitively with increasing the surface energy ratio of graphite to diamond. The gas activation process produces charges such as electrons and ions, which are energetically the strong heterogeneous nucleation sites for the supersaturated carbon vapor, leading to the formation of the charged clusters. Once the carbon clusters are charged, the surface energy of diamond can be reduced by the electrical double layer while that of graphite cannot because diamond is dielectric and graphite is conducting. The unusual phenomena observed in the chemical vapor deposition diamond process can be successfully approached by the charged cluster model. These phenomena include the diamond deposition with the simultaneous graphite etching, which is known as the thermodynamic paradox and the preferential formation of diamond on the convex edge, which is against the well-established concept of the heterogeneous nucleation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.65-66
• /
• 2000

Various fluoride films on a glass substrate were prepared and characterized to provide a seed layer for crystalline Si film growth. The XRD analysis on $CaF_2/glass$ illustrated (220) preferential orientation and showed lattice mismatch less than 5 % with Si. We achieved a fluoride film with breakdown electric field of 1.27 MV/cm, leakage current density about $10^{-6}$ $A/cm^2$, and relative dielectric constant less than 5.6. This paper demonstrates microcrystalline silicon $({\mu}c-Si)$ film growth by using a $CaF_2/glass$ substrate. The ${\mu}c-Si$ films exhibited crystallization in (111) and (220) planes, grain size of $700\;{\AA}$, crystalline volume fraction over 65 %, dark- and photo-conductivity ratio of 124, activation energy of 0.49 eV, and dark conductivity less than $4{\times}10^{-7}$ S/cm.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.136-144
• /
• 2022

Objective: This study was to identify the effect of pressure biofeedback applied in various postures that allow the application of abdominal drawing-in. Design: A cross sectional study. Methods: The study intended to compare changes in the thickness of abdominal muscles between different postures when abdominal drawing-in was performed using a pressure biofeedback unit in five postures and to compare differences in terms of measures such as the transverse abdominis's preferential activation ratio(PAR). Data measured from 30 healthy individuals were used for data analysis. A paired t-test and repeated measures analysis of variance was performed to compare the thickness of each abdominal muscle. Results: The transverse abdominis's and internal oblique's thickness showed statistically significant differences in all postures when abdominal drawing-in (p<0.05). In the comparison between the postures, statistically significant differences were observed between the positions of hook-lying and wall support standing and between supine and wall support standing and between hook-lying and sitting (p<0.05). In terms of the transverse abdominis's PAR in each posture, statistically significant differences were observed between hook-lying and quadruped, hook-lying and sitting, hook-lying and wall support standing, quadruped and supine, sitting and supine, as well as wall support standing and supine (p<0.05). Conclusions: When abdominal drawing-in using pressure biofeedback unit is performed for stabilization exercises, selecting and applying specific postures according to targeted muscles and the subject's functional ability will help provide a more efficient and accurate intervention.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.888-895
• /
• 2020

건설산업에서 근로시간 및 인력 수급의 변화로 탈 현장 공장기반 건설(OSC : Off Site Construction)형태의 생산방식이 주목받고 있다. 과거 1991년에 PC(Precast Concrete) 공동주택의 보급 및 확대 정책이 있었지만, PC 공동 주택은 품질문제 등으로 중단된 후 현재까지 활성화되지 못하고 있는 실정이다. 본 연구는 공동주택 부문에 OSC 기반 PC 적용을 활성화하기 위한 정책과제를 분석하고 전문가 심층 면접조사(FGI : Focused Group Interview)를 실시하여 정책 방향을 도출하고자 하였다. 과거 정책 벤치마킹을 통해 공공부문 우선 적용을 통한 PC 공동주택 물량제공, 공공택지 우선공급, 용적률 우대, 자금지원, 세제지원, 업역 구조개선, 발주방식 개선, 공장인증시스템, 전문인력 양성 등 9개 정책과제를 도출하고 FGI를 실시한 결과로 얻은 시사점은 다음과 같다. 첫째, PC 공동주택 활성화를 위해서는 공공부분의 선도적인 노력이 필요하다. 둘째, 업역의 개편이나 새로운 발주방식의 도입보다는 협업 강화를 유도하는 정책방향이 바람직하다. 셋째, 적정공사비와 품질확보를 위한 제도적 토대 위에서 PC 활성화가 추진되어야 한다.