• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.319-325
• /
• 2013

PURPOSE. The objective of this study was to determine the effect of the color of a background substructure on the overall color of a zirconia-based all-ceramic crown. MATERIALS AND METHODS. Twenty one posterior zirconia crowns were made for twenty subjects. Seven premolar crowns and six molar crowns were cemented onto abutments with metal post and core in the first and second group. In the third group, eight molar crowns were cemented onto abutments with a prefabricated post and composite core build-up. The color measurements of all-ceramic crowns were made before try-in, before and after cementation. A repeated measure ANOVA was used for a statistical analysis of a color change of all-ceramic crowns at ${\alpha}$=.05. Twenty four zirconia specimens, with different core thicknesses (0.4-1 mm) were also prepared to obtain the contrast ratio of zirconia materials after veneering. RESULTS. $L^*$, $a^*$, and $b^*$ values of all-ceramic crowns cemented either on a metal cast post and core or on a prefabricated post did not show significant changes (P>.05). However, the slight color changes of zirconia crowns were detected and represented by ${\Delta}E{^*}_{ab}$ values, ranging from 1.2 to 3.1. The contrast ratios of zirconia specimens were 0.92-0.95 after veneering. CONCLUSION. No significant differences were observed between the $L^*$, $a^*$, and $b^*$ values of zirconia crowns cemented either on a metal cast post and core or a prefabricated post and composite core. However, the color of a background substructure could affect the overall color of posterior zirconia restorations with clinically recommended core thickness according to ${\Delta}E{^*}_{ab}$ values.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.328-334
• /
• 2017

PURPOSE. This study evaluated fracture resistance with regard to ferrule lengths and post reinforcement on endodontically treated mandibular premolars incorporating a prefabricated post and resin core. MATERIALS AND METHODS. One hundred extracted mandibular premolars were randomly divided into 5 groups (n=20): intact teeth (NR); endodontically treated teeth (ETT) without post (NP); ETT restored with a prefabricated post with ferrule lengths of either 0 mm (F0), 1 mm (F1), or 2 mm (F2). Prepared teeth were restored with metal crowns. A thermal cycling test was performed for 1,000 cycles. Loading was applied at an angle of 135 degrees to the axis of the tooth using a universal testing machine with a crosshead speed of 2.54 mm/min. Fracture loads were analyzed by one-way ANOVA and Tukey HSD test using a statistical program (${\alpha}=.05$). RESULTS. There were statistical differences in fracture loads among groups (P<.001). The fracture load of F2 ($237.7{\pm}83.4$) was significantly higher than those of NP ($155.6{\pm}74.3N$), F0 ($98.8{\pm}43.3N$), and F1 ($152.8{\pm}78.5N$) (P=.011, P<.001, and P=.008, respectively). CONCLUSION. Fracture resistance of ETT depends on the length of the ferrule, as shown by the significantly increased fracture resistance in the 2 mm ferrule group (F2) compared to the groups with shorter ferrule lengths (F0, F1) and without post (NP).

• 구강회복응용과학지
• /
• 제25권3호
• /
• pp.243-253
• /
• 2009

임플란트 술식에서 방사선 영상 기술, 컴퓨터 소프트웨어의 발전으로 정확한 진단 및 surgical guide의 제작이 가능해졌다. 본 증례는 양악 무치악 환자에서 고정성 임플란트 보철을 위해 CAD/CAM technique을 이용하여 수술을 하고 즉시 하중을 가한 증례이다. Planning software program을 이용하여 해부학적 구조물과 단면상을 고려하여 상 하악에 각각 6개씩의 임플란트를 최적의 위치에 계획하였다. 정밀한 surgical guide 이용하여 미리 계획된 위치와 방향으로 무절개 임플란트 식립 수술을 시행하였다. 즉시 사용 가능한 고정성 임시 보철물을 미리 제작해 수술 직후 장착하여 환자의 만족도를 높였으며, 이를 6개월간 평가하여 심미적이며, 기능적으로 안정적인 최종 보철물을 제작할 수 있었다.

• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.327-334
• /
• 2005

This study was designed to investigate the effect of the surgical delay in the prefabricated cutaneous flap. Abdominal skin flaps (n=40), $4.5{\times}6.0cm$ in size, were created by the subcutaneous implantation of a saphenous vascular tissue in the male Sprague-Dawley rats. In the groups 1 and 2, the pedicle was skeletonized. In the groups 3 and 4, perivascular muscle cuff or gracilis fascia was retained, respectively. Six weeks later, each flap was elevated as an island flap and reposed in place. All flaps of the group 2 had a 72-hours of delay period. Five days after the flap repositioning, estimation of flap viability, microangiographies, and histological evaluation of vessel development were performed. The groups 2 and 3 showed higher viability in flap survival. The dilated choke vessels and fully developed vascular network were observed in the flap of the group 2, but not typically seen in the other groups. New vessels around the implanted pedicle were more developed in the group 2. Amount of the vessels in the mid-portion of the flap was significantly increased in the groups 2 and 4. In conclusion, the delay procedure enhanced the viability, and its effect was dependent on the new vessel formation around the implanted pedicle.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.70-77
• /
• 2013

Recently the radiant panel heating and cooling system has been regarded as an alternative of low temperature heating and high temperature cooling by applying the renewable energy sources to the heating and cooling of buildings. Especially this system can be used as HVAC system alternatives in super high-rise buildings for energy saving and thermal comfort. Also it can be possible to reduce the plenum space because the minimum ventilation air will be supplied into the space. This study focused on the evaluation the basic characteristics of thermal output in prefabricated steel wall panel system for radiant heating and cooling. In order to evaluate the thermal output according to both various supply water temperatures and supply water flow rates, three-dimensional dynamic heat transfer analysis was performed. As results, for the heating mode, thermal output increased by 26% with the supply temperature increasing by $5^{\circ}C$. The surface temperature of panels range within $1{\sim}3^{\circ}C$. For the cooling mode, thermal output decreased by 18.2% with the supply temperature increasing by $2^{\circ}C$. The surface temperature of panels range within $0.5{\sim}1^{\circ}C$ and it was shown the even temperature distribution.

• 한국건축시공학회지
• /
• 제14권5호
• /
• pp.487-495
• /
• 2014

골조공사는 프로젝트의 전체 공사비 및 공사기간에서 차지하는 비율에 매우 높으며, 대형 프로젝트에서 골조공사 공기단축은 프로젝트의 성패를 결정하는 중요한 요소이다. 이에 공기단축을 위한 새로운 공법에 대한 연구가 지속적으로 이루어져 오고 있다. H형강 대신 앵글을 사용하는 PSRC 합성기둥은 기존의 SRC 기둥에 비해 높은 휨강도 및 연성도를 가지며 현장에서의 철근작업을 생략할 수 있다는 장점이 있으나, 여전히 거푸집작업이 필요하다는 한계점이 있다. 본 연구는 기존의 PSRC 기둥 공법을 개선하여 영구거푸집까지 선조립하는 Form-LPSRC 기둥 공법을 개발하는 것을 목적으로 한다. Mock-up test를 통해 발생 가능한 문제점을 사전에 검토함과 동시에 현장 적용을 통해 해당 공법의 적용효과를 분석하였으며, 기존 SRC 기둥에 공기, 원가, 품질, 안전, 환경 측면에서 우수한 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.605-610
• /
• 2011

간척지나 해안지역과 같은 연약지반에 건축 및 토목공사를 위해서는 지반의 강도를 높이기 위한 연약지반개량공사가 필수적이다. 연약지반 개량 공법은 여러 가지가 있으나 우리나라를 비롯해 세계적으로 연직배수공법을 주로 사용하고 있다. 연직배수공법은 연약한 점성토 지반 내에 인공적으로 연직 배수재를 다수 설치하여 배수거리를 단축시킴으로써 압밀을 촉진시키고, 그에 따른 강도증가 효과를 얻을 수 있는 공법이다. 연직배수재로는 경제성과 시공성이 우수한 PBD가 널리 사용되고 있다. PBD 시공품질은 시공 깊이, 압력, 수직도 등에 영향을 받게 된다. 본 논문에서는 PBD 시공시 배수재의 시공 심도, 압력, 수직도를 자동측정하여 작업자가 실시간으로 모니터링 할 수 있고 시공결과를 자동 저장하는 시스템을 개발하였다. 개발된 시스템은 시공 불량 요인이 발생시 자동 경고하여 불량률을 줄일 수 있고, 장비의 이상 발생시 자동 제어시스템을 가동하여 작업의 안전성을 확보하도록 하였다.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.48-54
• /
• 2019

PURPOSE. The aim of the present randomized controlled study was to compare prefabricated all-ceramic, anatomically shaped healing abutments followed by all-ceramic abutments and all-ceramic crowns and prefabricated standard-shaped (round-diameter) titanium healing abutments followed by final titanium abutments restored with porcelain-fused-to-metal (PFM) implant crowns in the premolar and molar regions. MATERIALS AND METHODS. Forty-two patients received single implants restored either by all-ceramic restorations (test group, healing abutment, final abutment, and crown all made of zirconia) or conventional titanium-based restorations. Immediately after prosthetic incorporation and after 12 months of loading, implant survival, technical complications, bone loss, sulcus fluid flow rate (SFFR) as well as plaque index (PI) and implant stability (Periotest) were analyzed clinically and radiologically. RESULTS. After 12 months of loading, an implant and prosthetic survival rate of 100% was observed. Minor prosthetic complications such as chipping of ceramic veneering occurred in both groups. No statistical significant differences were observed between both groups with only a minimum of bone loss, SFFR, and PI. CONCLUSION. All-ceramic implant prostheses including a prefabricated anatomically shaped healing abutment achieved comparable results to titanium-based restorations in the posterior region. However, observational results indicate a benefit as shaping the peri-implant soft-tissue with successive provisional devices and subsequent compression of the soft tissue can be avoided.

• 대한소아치과학회지
• /
• 제46권1호
• /
• pp.119-126
• /
• 2019

수면호흡장애는 구강악안면 근육 기능부전을 유발하여 안모의 형태이상 및 부정교합을 유발할 수 있다. 소아치과 영역에서 수면호흡장애의 조기 진단과 치료는 이러한 합병증을 차단하여 정상적인 안모 성장을 유지할 수 있다는 점에서 중요하다. 수면호흡장애의 치료법 중에 하나로 근기능요법이 있으며 기성 근기능 장치가 보조적으로 사용될 수 있다. 본 증례들에서는 수면호흡장애가 있는 부정교합 환자들에게 기성 근기능 장치를 사용하여 수면호흡장애를 해소하는 결과를 얻었기에 보고하는 바이다. 하지만 총생의 개선 효과는 그 정도에 따라 차이가 발생할 수 있으므로 이에 대한 한계점은 고려할 필요가 있다.

• 대한건축학회논문집:계획계
• /
• 제36권4호
• /
• pp.61-70
• /
• 2020

The purpose of this study is to provide data for planning future temporary housing in Korea by comparing and analyzing the characteristics of emergency housing rapidly supplied by Japan Prefabricated Construction Suppliers and Manufacturers Association(JPA) and general construction companies, according to the supply subject in times of natural disasters in Japan. Literature reviews and on-site field investigations are conducted as research methods during the period of August 4th~9th, 2019. As subjects of study, the characteristics of two housing complex built in Ishinomaki City with different supply subjects were compared and analyzed. As a result of this study, Japan has a clear distinction of terms for emergency housing, which are divided into rental and construction types. With the close cooperation between the government, local governments and construction companies, providing a prompt systematic supply is possible. The characteristics of emergency housing are differ depending on supply subjects. The emergency housing of JPA has diversity of plane, two rooms facing south, and fast construction time, while the emergency housing of the general construction company has a flexible spatial transformation and excellence of materials.