• KIEAE Journal
• /
• 제12권1호
• /
• pp.127-132
• /
• 2012

The energy consumption in the world is growing rapidly. And the environmental issues of climate become a important task. The interest in renewable energy like wind and solar is increasing now. Especially, by reducing power transmission loss, a small wind power is getting attention at the residential areas and campus of university. In this study, we attempted to estimate and compare the wind energy density using wind data of AWS (Automatic Weather Station) of H University. In this case of a campus, the weibull distribution parameter C is 2.27, and K is 0.88. According to the data, the energy density of the small wind power is 12.7 W/m2. We did CFD(Computational Fluid Dynamics) simulations at H University campus by 7 wind directions(ENE, ESE, SE, NW, WNW, W, WSW). In the results, we suggest 4 small wind powers. The small wind power generating system can produce 4,514kWh annually.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.359-364
• /
• 2002

Statistical energy method is widely used for the prediction of vibrational and acoustical behavior of complex structures, such as ship building and automobile in mid-, high frequency ranges. However. in order to convince this SEA result, it is important to verify estimated SEA parameters, e. g. modal density, energy in each subsystem, damping loss factor, coupling loss factor. with possible other method. For modal density parameter, the experimental estimations via Experimental Modal Analysis are checked with those from finite element method for both beam- plate and plate-plate cans. Loss factors are calculated by Lyon's simple method for the two subsystem. finally. modal experiments are carried out by varying the mass added on the junction of two subsystem for the purpose of investigating the influence on the coupling loss factor's behavior.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 2부
• /
• pp.961-964
• /
• 2010

A semi-empirical fluctuation term is presented to improve a classical equation of state (EOS) for volumetric properties in the critical region. The term is based on the two assumptions: (1) The Helmholtz energy is individually divided into classical and long-range density fluctuation contribution (2) All molecules form cluster near the critical region due to long-range density fluctuation. To formulate such molecular cluster, we extended the Veytsman statistics originally developed for the cluster due to hydrogen bonding. The probability function in the statistics is modified to represent the characteristics of long-range density fluctuation vanishing far from critical region. The proposed fluctuation contribution was incorporated into the Sanchez-Lacombe EOS and the combined model with 6 adjustable parameters has been tested against experimental VLE data. The combined model is found to well represent flatten critical isotherm for methane and top of the coexistence curve for the tested components. The prediction results for caloric data are in good agreement with the experimental data.

• 천문학회보
• /
• 제39권1호
• /
• pp.32.2-32.2
• /
• 2014

We present a prediction for 21cm differential brightness temperature (dTb) from a set of strongly clustered sources of Population III and II objects at high redshift, from a suite of numerical simulations of their formation and radiative processes. These objects are located inside a highly biased density environment ("Rarepeak"), which is a rare, high-density peak which extends to ~7 comoving Mpcs. We study the impact on the resulting 21 cm signal from their ultraviolet and X-ray properties. The boost of emission (dTb>0) by high-density environment, moderate leakage of X-ray photons, and strong absorption due to Lyman-alpha pumping contrive to make Rarepeak a discernible, spatially-extended (sky angle~10') object around z~15, which is found to be detectable as a single object by Square Kilometre Array (SKA) with integration time of ~[600-2000] hours. We also examine detectability of many such peaks through SKA precursors.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.93-99
• /
• 2017

The effort attempts to investigate the influence of various non-oriented electrical steel sheets on the core loss of a switched reluctance motor (SRM). The core loss of the motor inherits a strong correlation with flux density and permeability of the material. The study involves the use of laminated 2.7 % high silicon steel suitable for the motor in view of its higher flux density and lower core loss. The accurate prediction of core loss leaves way to suggest measures for improving the performance of the SRM. The dynamic simulation measurements of a 1.5 kW, three-phase 12/8 SRM involve the finite element method (FEM) and use the data obtained experimentally from Epstein frame. The closeness of the simulated and hardware results obtained with laminations of M400-50A, DI MAX-M19 and DI MAX-M15 both for the stator and rotor, espouse a greater significance to the findings in terms of the core loss density and forge new dimensions for its use in the drive industry.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.205-208
• /
• 2002

Thermal design is required with considering thermal stability to verify the reliability of electric power device with using IGBT. Numerical analysis is performed to analyzed the change in thermal resistance with respect to the various thermal density of heating element. Correlations between thermal resistance and heat generation density are established. With using these correlations, performance curve is composed with respect to the change in thermal resistance of cooling conditions for natural convection and forced convection. Thermal fatigue is occurred at the Inside and outside of IGBT by repeated heat load. The crack is occurred between base plate and ceramic substrate for the inside. When the crack length is 4mm, the failure is occurred. Therefore, Thermal design method considering thermal density, thermal fatigue resistance is presented on this study and it is expected to thermal design with considering life prediction.

• Communications for Statistical Applications and Methods
• /
• 제17권6호
• /
• pp.811-827
• /
• 2010

본 논문에서는 통계적 역문제로서 이항 선택모형에서의 밀도추정 방법에 대하여 연구하였다. 밀도함수의 추정을 위하여 직교열 기저를 이용하였으며, 모형의 복잡성과 예측의 정확성을 반영한 적절한 절단모수의 선택에 대하여 고려하였다. 이항 선택 모형에서 데이터에 의존하는 절단모수를 선택하는 방법에 대해 제안하고 모의실험, 실자료를 통해 제안한 방법의 성능을 규명하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.612-615
• /
• 2005

Low cycle fatigue tests are performed on the Incollel 617 that be used fur a hot gas casing. The relation between strain energy density and numbers of cycles to failure is examined in order to predict the low cycle fatigue life of Inconel 617. The life predicted by the strain energy method is found to coincide with experimental data and results obtained from the Coffin-Mansun method. Also the cyclic behavior of Inconel 617 is characterized by cyclic hardening with increasing number of cycle at room temperature.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.610-625
• /
• 2015

In this paper the wave run-up around a circular column in regular waves is numerically calculated to investigate the applicability of the Modified Marker-Density (MMD) method to prediction of wave run-up around an offshore platform. The MMD method is one of the methods to define the highly nonlinear free surface. The governing equations are the Navier-Stokes equations and the continuity equation which are computed in Cartesian grid system. To validate incident waves generated by numerical simulation, those are compared with the solutions of the Stokes $5^{th}$ order wave theory. The wave run-up simulations are performed varying the steepness and period of incident waves as referred experimental data. The numerical results are compared to the experimental data and the results show good agreements.

• 지구물리
• /
• 제7권2호
• /
• pp.121-134
• /
• 2004

This study has tried to develop the modified DRASTIC Model by supplying the parameters, such as structural lineament density and land-use, into conventional DRASTIC model, and to predict the potential of groundwater contamination using GIS in Hwanam 2 District, Gyeonggi Province, Korea. Since the aquifers in Korea is generally through the joints of rock-mass in hydrogeological environment, lineament density affects to the behavior of groundwater and contaminated plumes directly, and land-use reflect the effect of point or non-point source of contamination indirectly. For the statistical analysis, lattice-layers of each parameter were generated, and then level of confidence was assessed by analyzing each correlation coefficient. Groundwater contamination potential map was achieved as a final result by comparing modified DRASTIC potential and the amount of pollutant load logically. The result suggest the predictability of contamination potential in a specified area in the respects of hydrogeological aspect and water quality.