• 한국정밀공학회지
• /
• 제3권1호
• /
• pp.40-49
• /
• 1986

Crack, craze and void are common defects which may be found in the bulk of polymeric materials such as either themoplastics or thermosets. The healing phenomena, autohesion, of these defects are known to be a intrinsic material property of various polymeric materials. However, only a few experimental and theoretical investigations on crack, void and craze healing phenomena for various polymeric materials have been reported up to date [1, 2, 3]. This may be partly due to the complications of healing processes and lacking of appropriate theoretical developments. Recently, some investigators have been urged to study the healing phenomena of various polymenic materials since the significance of the use of polymer based alloys or composites has been raised in terms of specific strength and energy saving. In the earlier published reports [1, 2, 3, 4], the crack and void healing velocity, healing toughness and some other healing mechanical and physical properties were measured experimentally and compared with predicted values by utilizing a simple model such as the reptation model under some resonable assumptions. It seems, however, that the general acceptance of the proposed modeling analyses is yet open question. The crack healing processes seem to be complicate and highly dependent on the state of virgin material in terms of mechanical and physical properties. Furthermore, it is also strongly dependent on the histories of crack, craze and void development including fracture suface morphology, the shape of void and the degree of disentanglement of fibril in the craze. The rate of crack healing may be a function of environmental factors such as healing temperature, time and pressure which gives different contact configurations between two separated surfaces. It seems to be reasonable to assume that the crack healing processes may be divided in several distinguished steps like stress relaxation with molecular chain arrangement, surface contact (wetting), inter- diffusion process and com;oete healing (to obtain the original strength). In this context, it is likely that we no longer have to accept the limitation of cumulative damage theories and fatigue life if it is probable to remove the defects such as crack, craze and void and to restore the original strength of polymers or polymer based compowites by suitable choice of healing histories and methods. In this paper, we wish to present a very simple and intuitive theoretical model for the prediction of healed fracture toughness of cracked or defective polymeric components. The central idea of this investigation, thus, may be the modeling of behavior of chain molecules under healing conditions including the effects of chain scission on the healing processes. The validity of this proposed model will be studied by making comparisons between theoretically predicted values and experimentally determined results in near future and will be reported elsewhere.

• 한국터널지하공간학회 논문집
• /
• 제22권6호
• /
• pp.623-641
• /
• 2020

터널식 전력구는 약 5 km 이내의 연장을 기계식 굴착장비인 밀폐형 쉴드TBM을 이용하여 건설된다. 공기지연 예방 및 적기가압을 위해서는 암반등급별 공사기간의 예측정확도를 향상시켜야하며, 투입된 장비의 성능을 고려한 최적운전이 필수적이다. 이에 본 연구에서는 3.6 m급 쉴드TBM에 적합한 순굴진율 모델을 개발하고자 실대형 굴진시험을 수행하였다. 대표적인 일축압축강도에 대해서 소요추력과 커터헤드 회전속도를 바탕으로 약 100회의 실험을 수행하였다. 이에 풍화암, 연암, 경암분류에 따라 일축압축강도와 장비의 소요추력 조건이 고려된 연직력과 압입깊이 및 일축압축강도와 토크와의 상관관계를 제시하였다. 개발된 순굴진율 모델을 바탕으로 구동부 성능분석과 최적운전 조건에 대해 제시하였다. 본 연구결과를 통해 터널식 전력구 공사기간 단축 및 조기사용에 대한 사용자 편익증대를 기대할 수 있다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권2호
• /
• pp.115-131
• /
• 2000

In the study of craniofacial deformity, it is very important that identifying the factor which can affect the morphology and which is closely related to the morphology, because it can not only improve the comprehension of growth and developmental process but also be applied in growth prediction and treatment modality. Several investigators have already mentioned the characterstics of head posture and airway space in relations to morphologic difference. But it is very meaningful work in clarifying the correlation between morphology, head posture and airway space that observing the change of head posture after morplologic change caused by operation and the change of airway space after same procedure. To investigate above correlation, I selected normal group which is consisted of 43 adults and mandibular prognathism group which is consisted of 47 adults who had been operated by sagittal split ramus osteotomy and were followed up more than 1 year. With their lateral skull radiograghs, reference lines which can evaluate each measuring points and areas without effect of postural change were first determined. And using above reference lines, change of airway space, positional change of tongue and hyoid, change of cranial and cervical angulations were measured. The results obtained from the study were as follows 1. In the change of head posture, the position of tongue and hyoid neighboring to pharynx is more closely related to the reference line of cervical column than to reference line of cranium. 2. After mandibular setback operation, the airway dimension was decreased to 81.6% of preoperative state at 1 month postoperatively and was slightly increased to 89.7% at 1 year postoperatively. 3. Posterior movement of tongue plays important role in decrease of airway dimension and inferior movement of hyoid was closely correlated with posterior movement of tongue. 4. Postoperative anterior movement of mandible, namely, morphologic relapse had correlation with relapse phenomenon of airway dimension. 5. Craniocervical angulation increased postoperatively. Especially in the postoperative early state, there was increased foreward inclination of cervical angulation rather than increase of cranial angulation. But at postoperative 1 year it was observed that cervical inclination was returned to preoperative state and cranial angulation was increased gradually. 6. Increase rate of airway dimension was correlated with the increase of cranial angulation from postoperative 1 month to 1 year. In conclusion, relapse tendency of airway dimension following increase of cranial angulation was found after mandibular setback operation and it is considered that increase of cranial angulation is one of compensatory mechanism in airway maintenance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.221-221
• /
• 2014

The present work proposes an improved numerical simulator for design and modification of large area capacitively coupled plasma (CCP) processing chamber. CCP, as notoriously well-known, demands the tremendously huge computational cost for carrying out transient analyses in realistic multi-dimensional models, because electron dissociations take place in a much smaller time scale (${\Delta}t{\approx}10-8{\sim}10-10$) than time scale of those happened between neutrals (${\Delta}t{\approx}10-1{\sim}10-3$), due to the rf drive frequencies of external electric field. And also, for spatial discretization of electron flux (Je), exponential scheme such as Scharfetter-Gummel method needs to be used in order to alleviate the numerical stiffness and resolve exponential change of spatial distribution of electron temperature (Te) and electron number density (Ne) in the vicinity of electrodes. Due to such computational intractability, it is prohibited to simulate CCP deposition in a three-dimension within acceptable calculation runtimes (<24 h). Under the situation where process conditions require thickness non-uniformity below 5%, however, detailed flow features of reactive gases induced from three-dimensional geometric effects such as gas distribution through the perforated plates (showerhead) should be considered. Without considering plasma chemistry, we therefore simulated flow, temperature and species fields in three-dimensional geometry first, and then, based on that data, boundary conditions of two-dimensional plasma discharge model are set. In the particular case of SiH4-NH3-N2-He CCP discharge to produce deposition of SiNxHy thin film, a cylindrical showerhead electrode reactor was studied by numerical modeling of mass, momentum and energy transports for charged particles in an axi-symmetric geometry. By solving transport equations of electron and radicals simultaneously, we observed that the way how source gases are consumed in the non-isothermal flow field and such consequences on active species production were outlined as playing the leading parts in the processes. As an example of application of the model for the prediction of the deposited thickness uniformity in a 300 mm wafer plasma processing chamber, the results were compared with the experimentally measured deposition profiles along the radius of the wafer varying inter-electrode gap. The simulation results were in good agreement with experimental data.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.75-81
• /
• 2017

Purpose: The energy consumption of apartment units is affected by the lifestyle of the residents rather than system technology. In this study the numerical analysis of assumed energy consumption correlation factors with arbitrary value due to uncertainty. It is intended to be used as a simulation correction value which can be utilized as a predicted value of actual energy usage. The correction value of the simulation is set in the developed form of the existing process that derives the actual usage amount. The simulation results used in the existing evaluation system are used to maintain the useful value as the current system evaluation scale and predict the actual capacity. Method: The method of the study is to statistically analyze the data frames of all complexes capable of collecting the annual energy usage and to reconstruct the population by adding the variables that are expected to be correlated. Repeat the data frame configuration with variables that are assumed to be highly correlated with energy use levels. Determine whether there is correlation or not. The intensity of the external characteristics of the building equipment related to the energy consumption is presented as the quantitative value. Result: The correlation between electricity consumption and trading price since 2010 is analyzed as (Correlation coefficient 0.82). These results are higher than (Correlation coefficient 0.79), which is the correlation between residential area and trading price. This paper signifies the starting point of the methodology that broadens the field of view of verification of simulation feasibility limited to the prediction technique focused on the simulation tool and the element technology scope.The diversified phenomenon reproduction method develops the existing energy simulation method.It can be completed with a simulation methodology that can infer actual energy consumption.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.644-649
• /
• 2017

자동차 산업에서는 환경 문제와 국제 유가 상승 등으로 인한 차량 경량화에 대한 요구가 증대되고 있다. 이에 따라 알루미늄 합금과 특수 소재 등이 차량 중량을 줄이는데 활용되고 있지만 비용과 강도 측면에서 철강소재를 극복하기 에는 여전히 많은 어려움이 있다. 따라서 강도와 성형성이 좋은 AHSS(Advanced High Strength Steel) 소재의 적용이 증가하고 있다. 특히 운전자 보호를 위한 안전 규제가 강화되면서 센터필러 (Center Pillar), 루프레일 (Roof Rail) 부분에 1.2GPa급 초고강도 강재의 적용이 점차 늘어나고 있으며 이종강재에 대한 자동차 차체 적용 또한 점차 증가하고 있다. 본 연구에서는 SGAFC1180 1.2t 강재의 저항 점용접성 및 용접부의 특성을 파악하였다. 시뮬레이션을 이용하여 너깃의 생성 및 성장 거동을 관찰하였으며 예측 성능은 오차율 10% 이내에서 유사한 경향을 나타내었다. 또한 이러한 거동이 공정변수인 동저항에 미치는 영향을 파악하였고 전단인장강도 및 너깃 직경과의 상관관계를 고찰하였다. 본 연구를 통하여 동저항의 패턴을 인식하여 패턴의 형태에 따라 용접 상태를 분류하고 용접 품질을 판단하는 시스템도 제안할 수 있을 것으로 사료된다.

• 한국수산과학회지
• /
• 제30권5호
• /
• pp.782-793
• /
• 1997

식물 플랑크톤의 인위적인 용승조건 하에서 생리적 적응 (shift-up)을 알아보기 위하여, 안정동위원소인 $^{15}N-KNO_3$를 이용하여 실험실에서 Dunaliella tertiolecta의 질산염 흡수 능력을 측정하였다. 그 결과 예상과는 달리 최대 질소비 질산염 흡수 속도 $(V_{NO3})$와 초기 질산염 농도 사이에는 유의성 있는 상관관계가 나타나지 않았다. 그러나 최대 질산염 운반 속도 $(\rho_{NO3})$와 $25\;{\mu}M$ 이하의 초기 질산염 농도 사이에는 강한 상관성이 나타났으며, 이는 배양 세포의 생리적인 상태에 의한 영향에도 기인한다. $\rho_{NO3}$의 증가는 주로 입자성 유기 질소 농도의 증가와 함께 부분적으로는 $V_{NO3}$의 증가에 기인한다. 식물 플랑크톤 개체군이 심하게 shift-down되었을 경우 질산염 흡수의 생리적 적응은 높은 초기 질산염 농도에서 주목할 만큼 저해되었다. 최대 $V_{NO3}$ 또는 $\rho_{NO3}$이 나타나는 시기는 초기 질산염 농도와 관련이 있다. 높은 초기 질산염 농도에서는 $V_{NO3}$와 $\rho_{NO3}$의 최대치가 낮은 초기 질산염 농도에서보다 $1\~2$일 정도 늦게 나타났다. 이는 Zimmerman et al. (1987)의 shift-up 모델에서의 예측과 상반되는 결과이다. Shift-up 과정은 명백히 내부적인 시간순서와 초기 질산염 농도에 의하여 조절되지만, $V_{NO3}$의 크기는 질산염 농도의 변화에 거의 영향을 받지 알았다.

• 재활간호학회지
• /
• 제1권1호
• /
• pp.61-71
• /
• 1998

Defining prediction variables related to metamemory for the adults in aging process has worthwhile meaning from the perspective that the produced results can be helpful to reducing the difficulty of memorizing efforts and it can also enhance quality of life of aged. This study attempted to analysis relationship between perceived health status, depression, memory self-efficacy and meta memory for the subjects of middle age and old age adults. This study was designed by adopting descriptive correlational analysis method for the 468 middle and old age adults who are living in Seoul. Samples were selected by convenience sampling. Data collection was done over 1 month period in june 1998. The instruments used in this study were health status measuring scale including depression measuring scale, memory self efficacy measuring scale and metamemory measuring scale which were verified for reliability. Data collected were analized by using SPSS for frequency, Peason correlation, t-test and ANOVA according to the variables character and the study purposes. Results of the study were as follows. 1. Relationship between perceived health status, depression, memory self-efficacy and metamemory. Relational analyses between perceived health status, depression, memory self-efficacy and metamemory supported the hypotheses of 1st, 2nd and 3rd(p < .01). These results suggested that the aged perceived great health status then their memory self-efficacy, and metamemory showed the high scores. In the case of depression when its level became decreased metamemory was inclined to increased. Thus, it is identified that strong relationship exists between these variables. 2. Perceived health status, depression, memory self-efficacy by subject's general characteristics. Scores of perceived health status were high in the group of man compared to the group of women, and also highly educated group showed great perceived health status. Group of persons having occupation showed high score of perceived health status and low depression score. The score of memory self-efficacy and metamemory showed higher in the middle aged than the old aged. The high scores of memory self-efficacy and metamemory were found in the group of highly educated people and who have continuing education. The high scores of memory self-efficacy were found in the group of persons having their job and high metamemory scores found in the group of persons having religion. In summary, the greater perceived health status and memory self-efficacy, the more metamemory scores were likely increased and the more depression level was decreased, the more metamemory was likely increased. Also it was found that general characteristics like educational level, continuing education and religion influenced the metamemory of the aged. Therefore, prevention the aged from getting depression and activation of health promotion are needed to delay time of memory loss.

• 터널과지하공간
• /
• 제27권6호
• /
• pp.343-350
• /
• 2017

최근 도심지 지상공간의 포화로 전세계적으로 지하공간개발이 활발히 진행되고 있으며, 지상 및 지하구조물에 인접하여 굴착이 많이 이루어지고 있다. 굴착공사 중 시공 부주의나 시공기술 미흡, 지하수 유출, 급격한 지층의 변화, 토류 시스템 구성품의 문제 등으로 인해 각종 지반함몰 사고가 발생하여 사회적 이슈로 부각되고 있다. 국가적으로 이를 대응하기 위하여 도심지 지하 시설물에 대한 예방중심의 선제적 재난 재해 관리 및 신속 복구 시스템 구축을 추진 중에 있다. 본 연구에서는 굴착공사 시 지반 내부적인 변화 요소(지하수위 변화, 지하매설물 손상 등)와 외부적인 변화요소(차량하중, 지진, 지반굴착 등)를 고려한 지하안전 확보를 위한 기술개발 동향에 대하여 자료를 수집하였다. 지반거동 해석 및 지반함몰 평가기술과 지반함몰 예방을 위한 안전한 굴착 및 보강기술, 지반함몰 발생시 긴급복구 기술의 개선 및 국내 자립화가 요구되고 있는 가운데 현재 도심지 굴착공사시 지반함몰 예방을 위한 기술개발 현황에 대하여 소개하고자 한다. 현재 연구가 진행되고 있는 부분도 있으나 크게 분류하여 예측/평가기술, 복합탐사기술, 차수보강기술, 긴급복구기술, 굴착기술의 5개 분야로 설명하고자 한다.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.200-214
• /
• 1993

본 연구에서는 Westinghouse Model 51 증기발생기의 U-bend 영역에서 2차측 유체의 횡단유동으로 유발될 수 있는 튜브군의 유체탄성불안정을 예측하기 위한 해석 을 수행하고 그 대표적인 결과들을 제시하였다. 그리고 U-bend 영역에서 AVB에 의한 튜브의 지지상태와 형태 및 최상부 TSP에서 Denting 또는 이물질 고착으로 인하여 변 경된 튜브의 고정지지조건 등이 튜브의 유체탄성불안정 응답에 미치는 영향을 조사하 였다. 유체탄성불안정 해석과정에서 필수적으로 선행되어야 하는 2차측 3차원 2상 유동장 계산은 증기발생기 열수력 해석용인 ATHOS3 코드로써 수행되었으며, U-튜브의 고유진동수와 모우드 형상은 공학해석용 유한요소 프로그램인 ANSYS코드로써 계산되었 다.