• 도시과학
• /
• 제7권2호
• /
• pp.21-27
• /
• 2018

With the increase of the skyscraper center, the development of large-diameter and high-strength reinforcing bars is being carried out to solve the dense reinforcement. In case of the steel reinforced concrete with a small cross section such as beam-column joints, the development length becomes short when straight bars are used. Therefore, it is possible to solve the problem that the development length becomes short by using the bearing strength of the hooked bar and headed bar. In this study, the exterior beam-column joint test of SD700 hooked bar and headed bar with anchorage length of 20db was conducted to extend the development length limitation of hooked bar and headed bar. As a result of the evaluation of the anchorage strength using the design equation by KCI, the average of the [measured value]/[predicted value] ratio was 1.31 for the hooked reinforcing bars. In the case of headed bars, the average of the [measured value]/[predicted value] ratio was 1.12. In addition, in order to compare the anchorage performance of the hooked bar and the headed bar, the measured values were divided by the square root of the compressive strength of the concrete to compare the anchorage strength. Under the same conditions, the anchorage strength of headed bars was 8.5% higher than the hooked bars.

• Journal of Chest Surgery
• /
• 제28권5호
• /
• pp.464-470
• /
• 1995

From Jan 1988 to Dec 1993, 196 consecutive patients with various pulmonary diseases underwent pneumonectomy. Mean age was 54.0 years[range:7-74 . The underlying diseases were lung cancer[154 cases , destroyed lung[29 cases with pulmonary tuberculosis or empyema thoracis and others[13 cases . The overall mortality and complication rate were 5.6% and 14.8%. In the groups of more than and less than 60 years of age, there was significant differences in mortality rate[P=0.004 . In the group of pneumonectomy and pleuropneumonectomy, there was no significant differences in mortality[P=0.164 and complication rate[P=0.052 . In the group of normal and abnormal EKG, there was no significant differences in mortality[P=0.560 and complication rate[P=0.693 . In the preoperative FEV1, preoperative FVC and predicted postoperative FEV1, prognostic cut-off points were 1800cc, 2600cc and 1300cc, and at points, positive predicted value were 12.3%, 10.5%.and 7.7% and negative predicted value were 97.8%, 98.3% and 96.2% respectively. The preoperative FEV1 is the most reliable indicator in assessment of prognosis of pneumonectomy.

• 한국토양비료학회지
• /
• 제48권2호
• /
• pp.100-104
• /
• 2015

Adverse effect of veterinary antibiotics (VAs) released into environment has been issued recently and concerns about analysis and management for VAs in the environment were increased. Main objective of this research was to calculate predicted environmental concentration (PEC) of the VAs in soil based on avaiable statistical data and result of previous study such as consumption rate and physiological properties of VAs. Total of 5 VAs, Chlortetracycline (CTC), Oxytetracycline (OTC), Sulfadimethoxine (SDX), Sulfamethazine (SMT), and Tylosin (TYL) were examined. Result showed that calculated PEC value in manure and soil was ordered as SMT > TYL > SDX > CTC > OTC. Range of calculated value for manure and soil was 0.50-67.04 and $0.48-64.45mg\;kg^{-1}$ respectively. Comparing to measured concentration of VAs in manure and soil, lower concentration of VAs in manure and soil was evaluated due to fate and degradation of VAs in manure and soil. Overall, evaluated simple modeling for calculating PEC of VAs in manure and soil can be adapted for preliminary screening purpose in environmental risk assessment and more refined modeling is necessary to examine detailed assessment of VAs in manure and soil.

• Computers and Concrete
• /
• 제13권4호
• /
• pp.531-545
• /
• 2014

The purpose of this paper is to develop a prediction model for the compressive strength of waste LCD glass applied in concrete by analyzing a series of laboratory test results, which were obtained in our previous study. The hyperbolic function was used to perform the nonlinear-multivariate regression analysis of the compressive strength prediction model with the following parameters: water-binder ratio w/b, curing age t, and waste glass content G. According to the relative regression analysis, the compressive strength prediction model is developed. The calculated results are in accord with the laboratory measured data, which are the concrete compressive strengths of different mix proportions. In addition, a coefficient of determination $R^2$ value between 0.93 and 0.96 and a mean absolute percentage error MAPE between 5.4% and 8.4% were obtained by regression analysis using the predicted compressive analysis value, and the test results are also excellent. Therefore, the predicted results for compressive strength are highly accurate for waste LCD glass applied in concrete. Additionally, this predicted model exhibits a good predictive capacity when employed to calculate the compressive strength of washed glass sand concrete.

• Journal of the Korean Data and Information Science Society
• /
• 제18권2호
• /
• pp.301-314
• /
• 2007

The aim of this paper is to deal with a method to construct a separate fuzzy regression model with crisp input and fuzzy output data using a best response function for the center and the width of the predicted output. Also we introduce the crisp mean and variance of the predicted fuzzy value and also give some examples to compare a performance of the proposed fuzzy model with various other fuzzy regression model.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.3-7
• /
• 2000

In this study, a modified model for prediction of cutting force components in up end milling process is presented. Using this cutting force components of 4-tooth endmils with various helix angles have been predicted. Predicted value of cutting force components are well coincide with the measured ones. As helix angle increases overlapping effects of the active cutting edges increase and as a result the amplitudes of cutting force components decrease and the specific cutting energy consumed also decreases

• 소성∙가공
• /
• 제19권1호
• /
• pp.38-43
• /
• 2010

Electromagnetic forming (EMF) method is one of high-velocity forming processes, which uses electromagnetic Lorentz force. Advantages of this forming technique are summarized as improvement of formability, reduction in wrinkling, non-contact forming and applications of various forming process. In this study, the EMF apparatus is developed. It is designed to be stored in 10 capacitors connected in parallel, each with a capacitance of $50{\mu}F$ and maximum working voltage of 5kV. The system has capacitance of $500{\mu}F$ and maximum stored energy of 6.25kJ. And EMF experiments are carried out to verify the feasibility of the EMF apparatus, which has enough forming force from the results of EMF experiment. In addition, peak current carrying a forming coil is predicted from theoretical background, and verified the predicted value compared with experimental value using the current measurement equipment. Consequently, EMF apparatus developed in this study can be applied to various EMF researches for commercialization.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.253-254
• /
• 2012

The purpose of this study is to suggest and verify high-strength concrete mix design model applying neural network theory, in order to minimize effort and time wasted by using trial and error method utill now. There are 7 input and 2 output to predict mix design. 40 data of mix design were learned with back-propagation algorithm. Then they are repeatedly learned back-propagation in neural network theory. Also, to verify predicted model, we analyzed and compared value predicted from 60MPa mix design with value measured by actual compressive strength test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2052-2057
• /
• 2010

In December 2006, the Ministry of Environment in Korea established the "Indoor Air Quality Management Guidelines in Public Transportation." As the items of the guideline, $CO_2$(Carbon dioxide) and PM10(Particulate matter). Therefore, the air quality inside the train is supposed to be ruled by this guideline. This study calculated the increase or decrease rate of the $CO_2$ concentration by using the data measured in accordance with flap operation. In case of flap close or open, the calculated $CO_2$ concentration variation was 6.32ppm/min. The $CO_2$ concentration prediction equation was derived from the general equation and the actual measured value are compared with the predicted $CO_2$ concentration suggested during the KyungBu high speed railway construction. The predicted value show good agreement with the measured data.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.663-668
• /
• 2003

In this paper, an environmental factor and a durability resistance factor which adapts the concept of the Load Resistance Factor Design for safety design of RC structures is derived and a basic principle of a durability evaluation for RC structures using the factors is proposed. It is shown that durability of RC structures can be evaluated by comparing predicted value of chloride ion concentration with limit value of concentration for steel corrosion generation in reinforcement steel position and the durability of concrete manufactured for the RC structures can be also evaluated by comparing characteristic diffusion coefficient of concrete with predicted diffusion coefficient during mixture design.