• 대한공간정보학회지
• /
• 제10권1호
• /
• pp.77-82
• /
• 2002

지형공간정보시스템(GSIS)을 지적 전산화작업에 적용하기 위해 지적정보를 수치 전산화하여 토지대장의 On-Line시스템화에 운용할 수 있도록 시도하는데 의의가 있다. 그리고 지적정보의 D/B 구축을 위해 연구대상 지를 일부 선정하여 지적측량 시 D/B 화할 수 없는 지적 불부합지를 일반측량에 의한 현황도와 항공사진측량에 의해 제작된 GSIS 도면을 이용하여 실지 지적기초점을 내려 현황 측량한 성과에 의해 비교 분석하고 그 상관성을 해석함으로써 장래 지적 정보 D/B 구축 시 측량기법의 정확도 향상을 도모하고자 하는데 그 목적이 있다.

• 한국측량학회지
• /
• 제36권5호
• /
• pp.403-412
• /
• 2018

Recently, GNSS (Global Navigation Satellite System)-derived orthometric height determination has been studied to improve the time and cost-effectiveness of traditional leveling surveying. However, the accuracy of this new survey method was evaluated when unknown points are located lower than control points. In this study, the accuracy of GNSS-derived orthometric height was examined using TPs (Triangulation Points) to verify the stability of surveying in mountainous areas. The GNSS survey data were obtained from Mungyeong, Unbong/Hadong, Uljin, and Jangseong. Three unknown points were surrounded by more than three UCPs (Unified Control Points) or BMs (Benchmarks) following the guideline for applying GNSS-derived orthometric height determination. A newly developed national geoid model, KNGeoid17 (Korean National Geoid 2017), has been applied for determining the orthometric height. In comparison with the official orthometric heights of the TPs, the heights of the unknown points in Mungyeong and Unbong/Hadong differ by more than 20 cm. On the other hand, TPs in Uljin and Jangseong show 15-16 cm of local bias with respect to the official products. Since the precision of official orthometric heights of TPs is known to be about 10 cm, these errors exceed the limit of the precision. Therefore, the official products should be checked to offer more reliable results to surveyors. As an alternative method of verifying accuracy, three different GNSS post-processing software were applied, and the results from each software were compared. The results showed that the differences in the whole test areas did not exceed 5 cm. Therefore, it was concluded that the precision of the GNSS-derived orthometric height was less than 5 cm, even though the unknown points were higher than the control points.

• 한국임상수의학회지
• /
• 제28권4호
• /
• pp.422-426
• /
• 2011

For a national survey in which wide geographic region or an entire country is targeted, multi-stage sampling approach is widely used to overcome the problem of simple random sampling, to consider both herd- and animallevel factors associated with disease occurrence, and to adjust clustering effect of disease in the population in the calculation of sample size. The aim of this study was to establish sample size for estimating bovine tuberculosis (TB) in Korea using stratified two-stage sampling design. The sample size was determined by taking into account the possible clustering of TB-infected animals on individual herds to increase the reliability of survey results. In this study, the country was stratified into nine provinces (administrative unit) and herd, the primary sampling unit, was considered as a cluster. For all analyses, design effect of 2, between-cluster prevalence of 50% to yield maximum sample size, and mean herd size of 65 were assumed due to lack of information available. Using a two-stage sampling scheme, the number of cattle sampled per herd was 65 cattle, regardless of confidence level, prevalence, and mean herd size examined. Number of clusters to be sampled at a 95% level of confidence was estimated to be 296, 74, 33, 19, 12, and 9 for desired precision of 0.01, 0.02, 0.03, 0.04, 0.05, and 0.06, respectively. Therefore, the total sample size with a 95% confidence level was 172,872, 43,218, 19,224, 10,818, 6,930, and 4,806 for desired precision ranging from 0.01 to 0.06. The sample size was increased with desired precision and design effect. In a situation where the number of cattle sampled per herd is fixed ranging from 5 to 40 with a 5-head interval, total sample size with a 95% confidence level was estimated to be 6,480, 10,080, 13,770, 17,280, 20.925, 24,570, 28,350, and 31,680, respectively. The percent increase in total sample size resulting from the use of intra-cluster correlation coefficient of 0.3 was 22.2, 32.1, 36.3, 39.6, 41.9, 42.9, 42,2, and 44.3%, respectively in comparison to the use of coefficient of 0.2.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.117-126
• /
• 2008

본 논문에서는 기존 현수교의 정밀측량을 효과적으로 대체할 목적으로 비용과 인력의 소요가 적은 고해상도 디지털 카메라를 이용한 화상변위측정기법을 제시하고 이를 자동화 할 수 있는 프로그램을 개발하였다. 사진의 분할매수에 따른 측정의 정밀도를 고찰하기 위하여 구조물 전체를 5장, 13장, 19장으로 분할 촬영하였고 실제 공용중인 현수교를 대상으로 측정결과를 비교하였다. 개발된 화상처리기법을 이용한 측정결과는 실제 현수교의 정밀형상 측량결과와 비교적 잘 일치하였으며 측정에 소요된 비용과 시간이 매우 절감되는 것으로 나타났다. 본 연구에서 개발된 측정기법은 렌즈의 왜곡현상 보정알고리즘을 개선하고 프로그램의 자동화 비율을 높인다면 다양한 구조물에 적용될 수 있을 것으로 판단된다.

• 한국농공학회논문집
• /
• 제61권1호
• /
• pp.131-144
• /
• 2019

The purpose of study was to determine the hygrophyte index of each plant(HIP) considering the moisture environment condition (MEC) of the native plants on the downstream slope of the fill dam and evaluate its applicability which to develop a method to search for leaks and saturated zones of the fill dam for status evaluation of precision safety diagnosis. The HIP was weighted average and consisted of 19 ranks. The weighted average was calculated according to the following three procedures: First, the linear assumption was made according to the actual habitat environmental conditions, the second one was weighted to 10% of the optimal habitat condition, and finally the average value of the distribution range values. The Hygrophyte index of vegetation at each plot (HIV) was obtained from the Sinheung reservoir (Yesan-gun, Chungcheongnam-do) using the results of vegetation survey of the Sinheung reservoir with precision safety diagnosis and suggested the use of the hygrophyte index of the cultivated vegetation. The average HIP range of plant species that emerged in 50 survey sites on the downstream slope of the Sinheung reservoir is 2.99 to 3.56. The coefficient of variation showed a large difference depending on the appearance of the leakage indicator plant(LIP) species. The range of HIV is 2.80 to 4.26, the mean value is 3.37, standard deviation is 0.37 and the coefficient of variation is 9.7%. As a result, the value of the coefficient of variation showed a large difference depending on the appearance of the plant species.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.37-41
• /
• 2018

최근 시설물의 안전 및 유지관리에 관심이 증대되고 있으나, 발주처의 저가발주로 인해 안전진단전문기관은 부실화 되고 부실 점검 및 진단으로 인한 많은 문제점들이 야기되고 있다. 따라서 본 연구에서는 실무자들의 인식조사와 사례분석을 통해 실행대가 현황을 고찰하였으며, 그 결과 정밀안전점검은 대가기준 조정보다는 대가기준의 효율성 증대 및 강제성 강화가 필요한 것으로 판단된다. 또한 정밀안전진단은 연면적 $10,000m^2$미만 시설물에 대한 대가기준 설계금액을 현재 기준에서 80%로 하향조정하고, 그 이상의 시설물에 대해서는 현행 대가기준을 적용하되, 대가기준의 강제성 강화가 필요할 것으로 판단된다.

• Fisheries and Aquatic Sciences
• /
• 제21권8호
• /
• pp.24.1-24.9
• /
• 2018

The Korean bottom trawl survey has been deployed on a regular basis for about the last decade as part of groundfish stock assessments. The regularity indicates that they sample groundfish once per grid cell whose sides are half of one latitude and that of one longitude, respectively, and whose inside is furthermore divided into nine nested grids. Unless they have a special reason (e.g., running into a rocky bottom), their sample location is at the center grid of the nine nested grids. Given data collected by the survey, we intended to show how to appropriately estimate not only the survey index of a fish stock but also its uncertainty. For the regularity reason, we applied the systematic sampling theory for the above purposes and compared its results with a reference, which was based on the simple random sampling. When using the survey data about 11 fish stocks, collected by the spring and fall surveys in 2014, the survey indices of those stocks estimated under the systematic sampling were overall more precise than those under the simple random sampling. In estimates of the survey indices in number, the standard errors of those estimates under the systematic sampling were reduced from those under the simple random sampling by 0.23~27.44%, while in estimates of the survey indices in weight, they decreased by 0.04~31.97%. In bias of the estimates, the systematic sampling was the same as the simple random sampling. Our paper is first in formally showing how to apply the systematic sampling theory to the actual data collected by the Korean bottom trawl surveys.

• 자원환경지질
• /
• 제37권1호
• /
• pp.49-59
• /
• 2004

The concectration and distribution of contaminants obtained from a contaminated land investigation or an environmental geochemistry survey constitutes the basis of a decision-making process on environmental policies or of scientific researches. As the quality of data determines the reliability of the result, the investigation plan should be adjusted according to the purpose of the investigation. In general, the effort to improve the data quality had been focused mainly on the QA/QC procedures in laboratories. The rapid progress of analytical instrument has also contributed toward improving the analytical precision to a sacrificable degree. Nevertheless, in many cases, it is not the analytical precision that needs improvement for the better precision of overall measurement process: it is rather during the sampling process in the field that is responsible for the poor precision. To assess the data quality on a measured value, ISO recommends to provide information on "measurement uncertainty" along with the measured value. The measurement uncertainty in an environmental measurement context can be explained as the statistical number that expresses the degree of the uncertainty stemming from the sampling and analytical procedures. There is a cost involved in order to improve the precision of sampling and analytical methods so as to decrease the degree of measurement uncertainty. The economical point of compromise in an investigation planning can be achieved when the allowable degree of uncertainty has been set before-hand. The investigation can then be planned accordingly not to exceed the uncertainty limit. Furthermore, if the measurement uncertainty estimated from the preliminary investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the investigation should be allotted cost-effectively to reinforce the weakest link of the whole investigation process. This paper aims to present a method of estimating the level of measurement uncertainty of a measured contamination concentration at a site used as an example and to show how the estimated uncertainty can be applied to serve the particular purpose of an investigation.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.129-134
• /
• 2001

It is essential to predict the welding deformation at assembly stage, to increase productivity through mechanization and automation effectively. A practical analysis method appled for production engineering was proposed to simulate the deformation of arc welding, with an analytical model using finite element method solving thermal-elastic-plastic behavior. In this research, for accurate assembling, 3-D thermal-elastic-plastic finite element model is used to simulate the out-of-plane deformation caused by arc welding. Efforts have been made to find out the efficient method to improve the reliability and accuracy of the numerical calculation. Each of theories of small and large deformation is applied in solving 3-D thermal-elastic-plastic problem to compare with their efficiency about calculation imes and solution accuracy. When solid elements are used in a bending problem of a plate, phenomenon that the predictive deformation is more than that of actual survey is observed. To prevent this phenomenon, reduced integration method for element is employed instead of full integration that is generally used in 3-D thermal-elastic-plastic analysis.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.209-219
• /
• 2000

A method is developed to evaluate machining process and to determine the optimal machining conditions considering the environmental effects. The method Is based on the evaluation attributes from the general LCA programs and the analysis technique of AHP from HHS. To assist the analysis. the mass models of cutting energy, tools, and fluids are developed. The models may be used for both quantitative prediction of the uses and disposed masses of materials and optimization of the machining conditions. The algorithm with the mass models is applied to the milling process planning. The process to survey the environmental data, calculate the used mass, and evaluate the alternatives is demonstrated. This demonstration illustrates the of the change of process conditions of the decision making.