지상사진측량은 항공사진측량에 비하여 촬영위치를 비교적 자유로이 선정할 수 있고, 대상물에 대한 촬영체계의 기하학적인 요소로부터 대상점 위치결정의 정확도를 사전에 예측하므로써 요구하는 정확도를 만족시킬 수 있는 최적 촬영체계를 설계할 수 있다. 문화재조사와 정밀 시설물점검에 많이 이용되는 수렴사진의 경우, 최적촬영조건에 대한 기존의 이론적 또는 실험적 연구는 기본적으로 평면형인 대상물의 정면중앙에 대하여 좌우대칭인 위치에서 수렴촬영하는 경우가 대부분이다. 그러나 대상물 주위의 제약조건에 의하여 정면에서 촬영하기 곤란하거나, 충분한 수렴각을 확보하기 곤란한 경우가 많으며, 대상물 형태 또한 단일평면만으로 해석하기 곤란한 경우도 많다. 따라서, 본 연구에서는 여러가지 평면이 조합된 형태의 대상물에 대한 지상수렴사진의 정확도 변화 양상을 고찰하므로써, 최적촬영조건을 도출하고자 한다. 본 연구의 결과 촬영방향, 수렴각 변화는 물론 대상물 형태에 대한 정확도 분석이 가능하여, 시설물측량, 문화재조사 및 복원, 정밀기기설치, 변형측량 등 정밀관측을 요하는 대상물에 대한 수렴사진 촬영체계의 설계에 효과적으로 이용될 것으로 사료된다.
본 연구는 시중에 널리 사용되는 치과용 지르코니아 코어를 이용하여 서로 다른 형태의 지대치를 대상으로 작업모형을 제작한 후, 치과용 스캐너를 통해 3차원 디지털 모형을 전환한 데이터를 토대로 지르코니아 코어를 제작하였으며, 각 실험군별 변연 적합도를 측정하여 비교분석하고자 하였다. 이와 같은 결과로 형태가 다른 지대치가 CAD/CAM system으로 치과 보철물 제작 시 적합도의 영향여부를 비교하였다. 제한된 조건 하에서 수행된 본 연구에서 다름과 같은 결과를 보였다. 지대치의 형태가 다른 작업모형으로 제작된 지르코니아 코어의 변연 적합도는 큰 차이가 없었다(p>0.05). 작업모형의 부위를 4등분으로 나누어 측정한 변연 적합도 또한 통계적으로 유의한 차이를 보이지 않았다. 결론적으로 3종류의 다른 지대치 모두 유사한 지르코니아 코어의 변연 적합도를 보였으며, 측정된 결과는 선행연구에 비추어 볼 때 임상적으로 허용 가능한 수치($100{\sim}120{\mu}m$)를 초과하는 실험군은 없었다. 이와 같은 결과를 토대로 다른 형태의 지대치를 사용하여 제작되었더라도 지르코니아 코어의 변연 적합도에 큰 영향을 주지 않을 것으로 생각된다.
Although long-term runoff analysis is important as much as flood analysis in the design of water works, the technological level of the former is relatively lower than that of the latter. In this respect, the precise estimation model for the volume of successive runoff should he developed as soon as possible. Up to now, in Korea, Gajiyama's formula has been widely used in long-term runoff analysis, which has many problems in applying in real situation. On the other hand, in flood analysis, unit hydrograph method has been exclusively used. Therefore, this study aims at trying to apply unit hydrograph method in long-term runoff analysis for the betterment of its estimation. Four test catchment areas were selected ; Maesan area in Namlum river as a representative area of Han river system, Cheongju area in Musim river as one of Geum river system, Hwasun area in Hwasun river as one of Yongsan river system, and Supyung area in Geum river as one of Nakdong river system. In the analysis of unit hydrograph, seperation of effective rainfall was carried out firstly. Considering that effective rainfall and moisture condition of catchrnent area are inside and outside of a phenomenon respectively and the latter is not considered in the analysis, Initial base flow(qb)was selected as an index of moisture condition. At the same time, basic equation(Eq.7) was established, in which qb can take a role as a parameter in relating between cumulative rainfall(P) and cumulative loss of rainfall(Ld). Based on the above equation, computer program for estimation model of qbwas seperately developed according to the range of qb, Developed model was applied to measured hydrographs and hyetographs for total 10 years in 4 test areas and effective rainfall was estimated. Estimation precision of model was checked as shown in Tab- 6 and Fig.8. In the next stage, based on the estimated effective rainfall(R) and runoff(Qd), a runoff distribution ratio was calculated for each teat area using by computerised least square method and used in making unit hydrographs in each test area. Significance of induced hydrographs was tested by checking the relative errors between estimated and measured runoff volume(Tab-9, 10). According to the results, runoff estimation error by unit hydrograph itself was merely 2 or 3 %, but other 2 or 3 % of error proved to be transferred error in the seperation of effective rainfall. In this study, special attentioning point is that, in spite of different river systems and forest conditions of test areas, standardized unit hydrographs for them have very similar curve shape, which can be explained by having similar catchinent characteristics such as stream length, catchinent area, slope, and vegetation intensity. That fact should be treated as important factor ingeneralization of unit hydrograph method.
Rukdee, Surangkhana;Park, Chan;Kim, Kang-Min;Lee, Sung-Ho;Chun, Moo-Young;Yuk, In-Soo;Oh, Hee-Young;Jung, Hwa-Kyoung;Lee, Chung-Uk;Lee, Han-Shin;Rafal, Marc D.;Barnes, Stuart;Jaffe, Daniel T.
Journal of Astronomy and Space Sciences
/
제29권2호
/
pp.233-244
/
2012
The Korea Astronomy and Space Science Institute and the Department of Astronomy at the University of Texas at Austin are developing a near infrared wide-band high resolution spectrograph, immersion grating infrared spectrometer (IGRINS). The compact white-pupil design of the instrument optics uses seven cryogenic mirrors, including three aspherical off-axis collimators and four flat fold mirrors. In this study, we introduce the optomechanical mount designs of three off-axis collimating mirrors and one flat slit-viewer fold mirror. Two of the off-axis collimators are serving as H and K-band pupil transfer mirrors, and are designed as system alignment compensators in combination with the H2RG focal plane array detectors in each channel. For this reason, the mount designs include tip-tilt and parallel translation adjustment mechanisms to properly perform the precision alignment function. This means that the off-axis mirrors' optomechanical mount designs are among the most sensitive tasks in all IGRINS system hardware. The other flat fold mirror is designed within its very limitedly allowed work space. This slit-viewer fold mirror is mounted with its own version of the six-point kinematic optics mount. The design work consists of a computer-aided 3D modeling and finite element analysis (FEA) technique to optimize the structural stability and the thermal behavior of the mount models. From the structural and thermal FEA studies, we conclude that the four IGRINS mirror mounts are well designed to meet all optical stability tolerances and system thermal requirements.
This study presents the application of satellite laser ranging (SLR) to orbit determination (OD) of high-Earth-orbit (HEO) satellites. Two HEO satellites are considered: the Quasi-Zenith Satellite-1 (QZS-1), a Japanese elliptical-inclinedgeosynchronous-orbit (EIGSO) satellite, and the Compass-G1, a Chinese geostationary-orbit (GEO) satellite. One week of normal point (NP) data were collected for each satellite to perform the OD based on the batch least-square process. Five SLR tracking stations successfully obtained 374 NPs for QZS-1 in eight days, whereas only two ground tracking stations could track Compass-G1, yielding 68 NPs in ten days. Two types of station bias estimation and a station data weighting strategy were utilized for the OD of QZS-1. The post-fit root-mean-square (RMS) residuals of the two week-long arcs were 11.98 cm and 10.77 cm when estimating the biases once in an arc (MBIAS). These residuals were decreased significantly to 2.40 cm and 3.60 cm by estimating the biases every pass (PBIAS). Then, the resultant OD precision was evaluated by the orbit overlap method, yielding three-dimensional errors of 55.013 m with MBIAS and 1.962 m with PBIAS for the overlap period of six days. For the OD of Compass-G1, no station weighting strategy was applied, and only MBIAS was utilized due to the lack of NPs. The post-fit RMS residuals of OD were 8.81 cm and 12.00 cm with 49 NPs and 47 NPs, respectively, and the corresponding threedimensional orbit overlap error for four days was 160.564 m. These results indicate that the amount of SLR tracking data is critical for obtaining precise OD of HEO satellites using SLR because additional parameters, such as station bias, are available for estimation with sufficient tracking data. Furthermore, the stand-alone SLR-based orbit solution is consistently attainable for HEO satellites if a target satellite is continuously trackable for a specific period.
Kim, Young-Rok;Park, Eunseo;Oh, Hyungjik Jay;Park, Sang-Young;Lim, Hyung-Chul;Park, Chandeok
Journal of Astronomy and Space Sciences
/
제30권4호
/
pp.269-277
/
2013
In this study, we present results of precise orbital geodetic parameter estimation using satellite laser ranging (SLR) observations for the International Laser Ranging Service (ILRS) associate analysis center (AAC). Using normal point observations of LAGEOS-1, LAGEOS-2, ETALON-1, and ETALON-2 in SLR consolidated laser ranging data format, the NASA/GSFC GEODYN II and SOLVE software programs were utilized for precise orbit determination (POD) and finding solutions of a terrestrial reference frame (TRF) and Earth orientation parameters (EOPs). For POD, a weekly-based orbit determination strategy was employed to process SLR observations taken from 20 weeks in 2013. For solutions of TRF and EOPs, loosely constrained scheme was used to integrate POD results of four geodetic SLR satellites. The coordinates of 11 ILRS core sites were determined and daily polar motion and polar motion rates were estimated. The root mean square (RMS) value of post-fit residuals was used for orbit quality assessment, and both the stability of TRF and the precision of EOPs by external comparison were analyzed for verification of our solutions. Results of post-fit residuals show that the RMS of the orbits of LAGEOS-1 and LAGEOS-2 are 1.20 and 1.12 cm, and those of ETALON-1 and ETALON-2 are 1.02 and 1.11 cm, respectively. The stability analysis of TRF shows that the mean value of 3D stability of the coordinates of 11 ILRS core sites is 7.0 mm. An external comparison, with respect to International Earth rotation and Reference systems Service (IERS) 08 C04 results, shows that standard deviations of polar motion $X_P$ and $Y_P$ are 0.754 milliarcseconds (mas) and 0.576 mas, respectively. Our results of precise orbital and geodetic parameter estimation are reasonable and help advance research at ILRS AAC.
항공수심라이다[airborne bathymetric LiDAR (Light Detection And Ranging)] 시스템의 웨이브폼(waveform) 데이터는 기존의 이산반환(discrete-return) 데이터에 비해 정확도, 해상도, 신뢰도가 향상된 데이터를 제공하며, 사용자의 데이터 처리 통제력을 강화하며 반환신호에 대한 추가적인 정보 추출을 가능하게 한다. 웨이브폼 분해(waveform decomposition)는 수면과 해저 반사, 수중산란 및 각종 노이즈가 혼재되어 수신된 웨이브폼으로부터 각각의 에코(echo)를 분리하는 기술로, 지형 포인트 추출을 위해 선행되어야 하는 처리 과정이자 측량 성과를 좌우하는 주요 기술이다. 본 연구에서는 항공수심라이다 원시 데이터로부터의 포인트 추출 성능을 향상시키 위해 새로운 웨이브폼 분해 기술을 개발하였다. 기존의 웨이브폼 분해 기술들이 웨이브폼 피크(peak)들을 가우시안(Gaussian) 분해의 초기값으로 사용하여 분해된 에코의 개수와 분해 성능이 피크 탐지 결과에 좌우되는데 반해, 제안한 기술은 최초 피크들 외에 잠재적인 피크 후보들을 추정하여 추가함으로써, 분해 모델의 근사 정확도를 향상시켰다. 국내 개발된 항공수심라이다 장비인 씨호크(Seahawk)로부터 동해안에서 취득된 웨이브폼 데이터를 이용한 실험 결과, 가우시안 분해 방법 대비 제안한 방법의 모델 근사 적합도(RMSE 기준)가 약 37% 향상된 결과를 얻었다.
본 연구의 목적은 해외 테스트베드 지역에서 제작된 아리랑 3호 DSM의 성능을 비교 분석하는 것이다. 이를 위하여 미국 샌프란시스코 지역을 촬영한 아리랑 3호 in-track(동일 궤도) stereo(입체) 영상을 수집하였다. 촬영된 영상의 스테레오 기하 요소는(B/H, convergence angle 등) 모두 안정적 범위에 있음을 확인하였다. 지상기준점을 이용한 정밀 센서모델링과 DSM 자동 생성 기법을 적용하여, 1 m 해상도의 DSM을 제작하였다. 평가 및 보정을 위한 참조 자료는 Airbus에서 상용 판매하고 있는 1 m 해상도의 Elevation1 DSM 제품과 Compass Data Inc.에서 실측한 0.01 m 이내 정확도의 지상점이다. 아리랑 3호의 정밀 센서 모델링 정확도는 수평 및 수직 방향으로 0.5 m (RMSE) 이내를 나타냈다. 생성된 DSM과 참조 DSM 사이의 difference map을 작성하였을 때, 평균과 표준 편차는 각각 0.61 m와 5.25 m로 유사한 정확도를 나타냈으나, 일부 지역에서는 100 m 이상의 큰 차이를 나타냈다. 이러한 지역은 초 고층 건물의 밀집지역의 폐색 지역에서 주로 나타났다. 향후, 아리랑 3호 tri-stereo 영상의 활용과 다양한 후처리 기법이 개발된다면 보다 향상된 품질의 DSM 생성이 가능할 것으로 판단된다.
야적퇴비는 농경지의 작물 양분 공급원으로 가치를 가지는 반면, 강우 시 환경에 악영향을 미치는 오염원으로 작용하게 되며, 이에 대한 관리가 요구된다. 본 연구에서는 광범위 영상 취득 및 자동 경로 비행이 가능한 고정익 무인항공기를 이용한 야적퇴비 적재량 산출 정확도 분석 및 활용 가능성을 파악하고자 하였다. 야적퇴비 3개소에 대한 적재량 산출 정확도를 평가하고자 지상 LiDAR 측량 및 회전익 무인항공기를 이용한 정밀 측량을 수행하였으며, 고정익 무인항공기를 통해 취득된 적재량과 비교하였다. 지상 LiDAR를 기준으로 야적퇴비 적재량 산출 비교 결과 회전익 기체의 오차율은 ±5 %, 고정익 기체의 오차율은 -15 ~ -4 %로 추정하였다. 고정익 기체에서 산출된 1개의 야적퇴비 적재량이 약 -15%로 과소추정 하였으나 야적퇴비 적재량의 편차는 2.9 m3로 큰 차이는 없었다. 또한 고정익 무인항공기를 이용한 주기적인 모니터링 결과 대상 지역에 위치한 야적퇴비 적재량의 시계열 변동 파악할 수 있었다. 이러한 결과는 고정익 무인항공기를 이용한 넓은 범위의 대한 효율적인 야적퇴비 모니터링 및 농경지의 비점오염원 관리가 가능함을 제시하였다.
최근 농업, 산림관리, 해안환경 모니터링 등 다양한 분야에서 다분광 카메라의 활용, 특히 드론에 탑재되어 활용되는 사례가 증대되고 있다. 산출되는 다분광 영상은 위치정보를 위해 주로 드론에 탑재된 GPS (Global Positioning System)나 IMU (Inertial Measurement Unit) 센서를 이용해 지리참조(georeferencing)되는데, 보다 높은 정확도를 위해서는 직접 측량한 지상 기준점을 이용하기도 한다. 하지만, 직접 측량에 드는 비용 및 시간으로 인해 또는 직접 접근이 어려운 지역에 대해서는 지상 참조값을 활용하지 않고 지리참조를 수행해야하는 경우가 자주 발생하게 된다. 본 연구는 지상기준점이 가용하지 않은 경우에 다분광카메라로부터의 영상의 지리참조 정밀도를 향상시키기 위해 같이 탑재된 고해상도 RGB카메라의 영상을 활용하는 방안에 대하여 연구한다. 드론 영상은 우선 번들조정을 통해 카메라의 외부표정 요소를 추정하였고, 이를 지상 기준점을 이용한 경우의 외부표정 및 위치결과와 비교하였다. 실험결과, 고해상도 영상을 포함하여 번들조정을 하게 될 경우, 다분광 카메라 영상을 단독으로 활용할 때보다, 다분광 카메라 영상의 지리참조 오차가 비약적으로 감소하였음을 확인하였다. 추가로 한 지상 지점에서 드론으로의 방향각을 추정할 때의 오차를 분석한 결과, 마찬가지로 고해상도 RGB영상을 포함하여 번들조정하게 되면 기존의 방향각 오차가 한 단위이상 감소하는 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.