• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.102-107
• /
• 2000

This study describes computer-aided design system for stepped asymmetric forgings. To establish the appropriate process sequence, an integrated approach based on a rule-base system was accomplished. This system has four modules, which are undercut prevention module, shape cognition module, 3D modelling module and corner/fillet correction module. These modules can be used independently or at all. The proposed shape cognition method could be widely used in forging design of asymmetric parts.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.263-264
• /
• 2008

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1403-1405
• /
• 2003

This paper focuses on the image correction under few GCPs, utilizes the collinearity equation, and builds up this mathematics model of space backside resection based on condition adjustment. Then calculates the adjusted elements of exterior orientation by iteration algorithm, and evaluates the precision. And demonstrates the high-precision, affection and wide-supplying-perspective of this model.

• 천문학회보
• /
• 제40권1호
• /
• pp.57.5-58
• /
• 2015

We describe relations between modern cosmology and general relativity in the historical context. We reveal some ironies imbedded in Einstein's final correction of his gravitational field equation in the context of cosmology in 1917 which has apparently opened a new era of modern physical cosmology. The ugly (according to Einstein) correction term was introduced only to build a static cosmology which turns out to be in flat contradiction with observation. Somehow, however, it is the correction term which has saved the modern cosmology from the genuine creativity of nature continuously revealed by astronomical observations. Whether the present precision cosmology is also a correct one is often ignored by the practitioners but still a pressing open question left for future theoretical and observational pursuits.

• 전자공학회논문지B
• /
• 제33B권5호
• /
• pp.94-101
• /
• 1996

When objects are scanned spatially by a laser-beam and mechanical mirror scanners, spatial information can be obtained, and then it is improtant to accurately obtain the parameters relating the light source and camera positions, etc.. In this paper, a calibration technique is presented for correction of measuremtn errors in a three-dimensional laser scanner system with two galvanometers. First, a model of the systematic errors is developed based on the geometry of the scanning system. Calibration parameter values are then iteratively adjusted with coarse-fine search in order to minimize errors (evaluation function) between measured and computed distances. It is shown that this correction method results in measurement precision suitable for practical use.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.342-344
• /
• 2006

During last years, large investments have been directed to development and research of nano-technological products like semiconductor, display panel, optic-fiber communication components, life technology, and ultra-precision components. All quantitative measurements at nanometre scale should guarantees accurate results and high quality. Laser interferometer is one of most famous nanometre scale devices to be able to measure metre-scale distance with nanometre scale resolution, but it is easily affected by various error causes like geometrical, instrumental and environmental factor. On the other side, capacitive sensor is robust to above error factors, but it is able to measure relatively shorter distance, under $100{\mu}m$, than laser interferometer. New error correction method for laser interferometry using capacitive sensor will be introduced in this paper.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1592-1596
• /
• 2007

Accuracy of flood forecasting is an important non-structural measure on the flood control and mitigation. Hence, combination of horologic model with real time error correction became an important issue. It is one of the efficient ways to improve the forecasting precision. In this work, an approach based on Kalman Filter (KF) is proposed to continuously revise state estimates to promote the accuracy of flood forecasting results. The case study refers to the Wi River in Korea, with the flood forecasting results of Xinanjiang model. Compared to the results, the corrected results based on the Kalman filter are more accurate. It proved that this method can take good effect on hydrologic forecasting of Wi River, Korea, although there are also flood peak discharge and flood reach time biases. The average determined coefficient and the peak discharge are quite improved, with the determined coefficient exceeding 0.95 for every year.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.5-12
• /
• 2008

There are some ways to improve precision of conventional munitions by low-cost method. 2D Course Correction Munition(CCM) is one of those ways, which is a 155mm projectile integrated with 2D Guidance Fuze(GF) instead of conventional fuze. 2D GF can correct the projectile trajectory and minimize range and deflection errors from its aimpoint using canard control. In this paper 2D CCM system concept is introduced and its course correction capability is analyzed using PRODAS.

• 정보처리학회논문지D
• /
• 제18D권1호
• /
• pp.67-80
• /
• 2011

재무 데이터 관리를 위한 자동화된 비지니스 서류 영상 처리 시스템에서 숫자 정보 검색 중 발생한 오류는 심각하여 그 시스템의 가용성 및 성능을 결정한다. 그 동안 자동 맞춤법 교정에 관한 방법론들이 개발되어 정보 검색 시스템 개발에 중요한 역할을 해왔으나 이러한 맞춤법 교정은 알파벳 등 기계학습이 가능하고 사전 형태로 보관이 가능한 기호에 한정되어왔다. 반면에 순수한 마코프 수열에 불과한 숫자들의 순열들은 맞춤법 교정을 위하여 사전적 형태로 보관하여 활용하는 것이 불가능 하다. 본 논문에서는 확률론적 정보 검색 알고리즘의 토대위에 제한적 문맥 인식과 복수의 스트림을 적용한 새로운 형태의 숫자 정정 OCR 모델을 제안하였다. 본 논문에서 제안된 숫자 정정 모델은 기존의 송장 문서 처리 시스템에 구현하였으며 제안된 숫자 정정 모델의 효과를 확인하기 위해 비교 테스트를 실행하였고 테스트 결과 상당한 성능이 개선되었음을 보여 주었다.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3115-3123
• /
• 1993

This paper presents a real-time correction method of the movemont errors of a translatory precision machine axis. This method is a null-balances technique in which two plane mirrors are used to generate an interferometric fringe pattern utilizing the optical principles of TwymanGreen interferometry. One mirror is fixed on a reference frame, while the other is placed on the machine axis being supported by three piezoelectric actuators. From the fringe pattern, one translatory and two rotational error components of the machine axis are simultaneously detected by using CCD camera vision and image processing techniques. These errors are then independently suppressed by activating the peizoelectric actuators by real-time feedback control while the machine axis is moving. Experimental results demonstrate that a machine axis can be controlled with movement errors less than 10 nm in vertical straightness, 0.1 arcsec in pitch, and 0.06 arcsec in roll for 50mm travel by adopting the real-time correction method.