• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.

• The Korean Journal of Quaternary Research
• /
• v.1 no.1
• /
• pp.3-20
• /
• 1987

With regard to the Quaternary formations in the Korean Peninsula, very few studies have been done specially from a stratigraphic viewpoint. The alluvial sediments filling in the valleys have often been considered as the only formation of Quaternary age (more precisely of the Holocone) and so the Pleistocene was regarded as an erosional or nondepositional episode. This is apparently evident from a quick look at the general geological maps of the Peninsula, which show a lithological sequence of Mesozoic or Paleozoic substrata immediately overlain by Holocene alluvium. Likewise, the Pleistocene period was described in terms of unconformity in most local or regional stratigraphical successions of the Peninsula. Recently several different types of Quaternary formation, besides the so-called Holocene alluvium in the valley plain have been found around the Peninsula. They consist of coastal deposits, marine or fluviatile terrace deposits, ancient valley fill deposits or slope deposits. Some parts of the volcanic sediments in Jeju Is. are also known as the Quaternary sequence. Thus the Quaternary deposits in the Peninsula are far more developed than previously known to gelolgists. Moreover the importance of Quaternary research became recently apparent in Korea due to the shortage of raw materials and to the policy of an optimum land-use. Advanced constructions and land reclamation have required more precise engineering parameters of loose materials and an estimation of land stability. This does not imply only the engineering, or the structural properties of the loose material, but at the same time the basic study of the sediments from the stratigraphical and environmental viewpoints has been necessary. In this connection, Quaternary outcrops specially along the coastal fringe of the Peninsula have been mapped, profiled and sampled for sedimentological, clay-mineralogical and palaeomagnetic studies. All these results are compiled for the core of the Quaternary stratigraphy of the Peninsula.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.427-438
• /
• 2014

To measure the depth and extension on the surface cracks of the stone monument, ultrasonic pulse velocity targeted at the Mulgyeseowon Stele in Changnyeong was used in this research. Additionally, to establish a long-term countermeasure of management and conservation for this stele, we have investigated the material properties and damage on it and have conducted a precise diagnosis by a variety of non-destructive techniques. Our research has revealed that stones of the stele are composed mainly of three rock types according to the parts of it, alkali-feldspar granite, gabbro and diorite. The result of the deterioration evaluation has occurred that cracks, which are observed from every direction in the body of the stele, are the significant factors to reduce structural stability. The ultrasonic velocity for an evaluation on the properties of the stele has revealed that the speed was high in the order of body, pedestal and crown. Furthermore, to understand the present condition and occurrences of the cracks which have measured in many different forms on the stele quantitatively, we have estimated from 0.6 to 24.1cm deep of the cracks by To-Tc method using ultrasonic velocity.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.25-37
• /
• 2013

Purpose - The structure of retailing has changed as retailers develop markets in response to business environment changes. This study aims to analyze the general situation of retailers in order to predict future global strategy using case studies of overseas expansion strategy and the Metro Group's global strategy. Research design, data, and methodology - The backgrounds to the new retail business model and retailer classification are analyzed as theoretical data. In addition, the key success point of the Metro Group's "cash and carry" strategy is analyzed as is the Metro Group's global CFAR (collaborative planning, forecasting, and replenishment) strategy. Finally, the plan for cooperation and precise forecasting under the Metro Group's supply chain management are analyzed from the promotion environment viewpoint. Related materials analyzed included the 2012 annual report, the Metro Group's web page, and a video interview with the executive in charge of global strategy and the new market development department. Some data were revised to avoid disrupting essential aspects of the case studies. Results - The important finding was that the Metro Group could be a world-class retail company with its successful global expansion strategy. The Metro Group's global strategy's primary goal is to have a leading business position in Eastern and Western Europe. The "cash and carry" strategy is highest priority in its overseas expansion strategy. Moreover, the Metro Group has standardized product planning capacity, which could be applied in various countries with different structural and cultural backgrounds. This is the main reason that the Metro Group could rapidly become successful in the Eastern Europe and Asian markets through its structural overseas expansion strategies. In addition, the Metro Group emphasizes the importance of supply chain management. Conclusions - First, retailers should create additional value through utilizing the domestic market, market power, and economies of scale to launch a global strategy to maximize benefits from diversification. Second, the political, economic, and cultural background of the target country needs to be understood to successfully implement the overseas expansion strategy. Third, the main factor of successful cooperation with a local partner is how quickly the company gains total understanding of the business resources and core competence of its partner. All organizations should focus on the achievement of goals in order to successfully operate the partnership. Fourth, retailers should improve their business, financial and organizational structure. Moreover, the work processes and company culture should also be improved to respond strongly in the competitive global market. Fifth, the essential point of a successful retail business is the control capacity of its branding and format. The retailer could avoid forecasting errors through supply chain management by perfectly distributing the actual amount of its inventory. In addition, the risks along the supply chain are effectively shared between the supply chain partners. Finally, the central tendency of the market is to gain in strength with this taking place across all parts of the business.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2020

In this study, the variation of the shrinkage in the thickness direction of the molded parts according to the gate size of the polymer core fabricated through the 3D printer using the SLS method was studied. The polymer cores are laser sintered and the powder material is nylon base PA2200. The polymer cores have lower heat transfer rate and rigidity than the metal core due to the characteristics of the material. Therefore, the injection molding test conditions are set to minimize the deformation of the core during the injection process. The resin used in the injection molding test is a PP material. The packing condition was set to 80, 90 and 100% of the maximum injection pressure for each gate size. The runner diameter used was ∅3mm, and the gates were fabricated in semicircle shapes with cross sections 1, 2, and 3 ㎟, respectively. Thickness measurement was performed for 10 points at 2.5 mm intervals from the point 2.5 mm away from the gate, and the shrinkage to thickness was measured for each point. The shrinkage rate according to the gate size tends to decrease as the cross-sectional area decreases as the maximum injection pressure increases. The average thickness shrinkage rate was close to 0% when the packing pressure was 90% for the gate area of 1mm2. When the holding pressure was set to 100%, the shrinkage was found to decrease by 3% from the standard dimension due to the over-packing phenomenon. Therefore, the smaller the gate, the more closely the molded dimensions can be molded due to the high pressure generation. It was confirmed that precise packing process control is necessary because over-packing phenomenon may occur.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.77-87
• /
• 2004

In this paper a back-propagation neural network model is developed to estimate the preconsolidation pressure of Korean soft soils based on 176 oedometer tests and 63 piezocone test results, which were compiled from 11 sites - western and southern parts of Korea. Only 147 data were used for the training of the neural network and 29 data, which were not used during the training phase, were used for the verification of trained network. Empirical and theoretical models were compared with the developed neural network model. A simple 4-4-9-1 multi-layered neural network has been developed. The cone tip resistance $q_T$ penetration pore pressure $u_2$, total overburden pressure $\sigma_{vo}$ and effective overburden pressure $\sigma'_{vo}$ were selected as input variables. The developed neural network model was validated by comparing the prediction results of the proposed neural network model for the new data which were not used for the training of the model with the measured preconsolidation pressures. It can also predict more precise and reliable preconsolidation pressures than the analytical and empirical model. Furthermore, it can be carefully concluded that neural network model can be used as a generalized model for prediction of preconsolidation pressure throughout Korea since developed model shows good performance for the new data which were not used in both training and testing data.

• Conservation Science in Museum
• /
• v.20
• /
• pp.61-76
• /
• 2018

The National Museum of Korea conducted conservation treatmenton the armor in its collection for the purposes of public display and appropriate preservation. This was preceded by a literature study on the types and features of the armor in order to collect basic data for secure and accurate conservation treatment. The literature study found that during the Joseon dynasty, armor was named in reflection of precise details including the color, material, status of the wearer, and even the certain parts of a suit of armor. In general, the name of armor includes the details in the order of color, underlying textile, and scale material (e.g., iron, leather). The former part of the name presents the features of the garment and the latter part refers to the material of the scales or the status of the wearer. The study also found that main materials used in armor include textiles, leather, and metal, and armor can be classified by the materials of the scales-e.g., metal armor (鐵甲), leather armor (皮甲), paper armor (紙甲), paper-and-fabric armor (淹心甲), silk armor (緞甲). Joseon-period armor can also be classified into four types according to its structure and the method of wearing, and overcoat(袍)-style armor was the most widely used in the period following the Japanese Invasion of Joseon (1592-1598) through the late nineteenth~early twentieth century. Overcoat-style armor was commonly worn by infantry, and the four examples of armor with leather scales at the National Museum of Korea belong to this category.

• Conservation Science in Museum
• /
• v.16
• /
• pp.122-137
• /
• 2015

White porcelain pitcher with an openwork dragon and cloud design across its surface in the collection of the National Museum of Korea (Deoksu 5531) was acquired in 1915. The restoration has been so far completed only for the mouth of the pitcher. This study discusses a new method based on 3D scanning and printing for the restoration of missing parts in the openwork dragon and cloud design. A strength test was performed on six output materials that have been already commercialized for comparison with the strength of materials used for traditional restoration such as epoxy putty (Quick Wood^®) and epoxy (Araldite AY103+HY956^®). This process confirmed that the digital technology-aided making of a restoration model requires less time and efforts than handmade work, all the while producing a more precise model. More importantly, this method being a non-contact method, it reduces risks associated with handmade work. Another advantage of this method is that digital pre-restoration images can be saved and used for future references. Notwithstanding, future research is needed on how to effectively apply digital technology for restoration of ancient objects and how to evaluate and use 3D output as well as on the method of shaping, joining and coloring the 3D output.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.27-33
• /
• 2016

The heat recovery system that was applied in this study, is the energy-saving type that can produce the maximum cooling capacity less power in use. In order to have a more precise control function the temperature and humidity of the constant temperature and humidity machine, control algorithm is applied to designed a fuzzy PID controller, and the outside air compensation device (air-cooled) demonstrated excellent ability to dehumidify the moisture, $-20^{\circ}C$ in winter. High efficiency and the low-noise type sirocco fan operate quitely and designed to fit the bottom-up and top-down in accordance with the characteristics of equipment. as a result of experiment data, the conversion efficiency is 95% or more, power recovery time is within 5sec, stop delay time is within 30sec, pump down time is 10sec, pump delay time is 5sec, heating delay time is 5sec, temperature deviation is ${\pm}2^{\circ}C$ (cooling deviation: $2^{\circ}C$, Heating deviation : $2^{\circ}C$), humidity deviation is a ${\pm}5%$ (humidification deviation 3.0%, dehumidification deviation 3.0%). Recently, ubiquitous technology is important. so, the constant temperature and humidity machine designed to be able to remotely control to via the mobile phone, and more scalable to support MMI software and automatic interface. Further, the life of the parts and equipment is extended by the failure.