• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.1
• /
• pp.49-56
• /
• 2010

Objective: To evaluate nasal and upper lip changes after Le Fort I surgery by means of images taken with a three-dimensional computed tomography (3D-CT). Methods: Fifteen patients (9 female and 6 male, mean age 21.9 years) with preoperative and postoperative 3D-CT were studied. The patients underwent maxillary movement with impaction or elongation, and advancement or setback. With the 3D-CT which presents reconstructive soft tissue images, preoperative and postoperative measurement and analysis were performed for nasal tip projection angle, columellar angle, supratip break angle, nasolabial angle, interalar width, internostril width, columella length and nasal tip projection. Results: Postoperative interalar and internostril widening was significant for all categories of maxillary movement. However, there was little significant relation in all parameters between the amount and direction of maxillary movement. Interestingly, movement of the maxilla with upward did show a little decrease in the columellar angle, supra tip break angle and nasolabial angle. Also movement of the maxilla with forward did show a little advancement in the upper lip position. Conclusion: Changes to the nose clearly occur after orthognathic surgery. There was a significant increase in postoperative interalar width and internostril width with maxillary movement. However, no clear correlation could be determined between amount of change and maxillary movement. Interestingly, maxillary impaction did show a little decrease in the columellar angle, supra tip break angle and nasolabial angle. In addition, we used 3D-CT for more precise analysis as a useful tool.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.603-608
• /
• 2011

In recent years, numerous mega-sized and complex civil infrastructures are being constructed all over the world. Therefore, more precise construction and maintenance technologies are required for these complicated construction projects. Especially, exact strength measurement and curing process monitoring of the concrete structures are very crucial to confirm the safety and effectiveness of these complicated structures. In this paper, a new Quick Response (QR) code-based concrete strength labeling technique using embedded self-sensing monitoring system is introduced. It is important to note that the QR code-based concrete labeling technique enables easy access of the databases related to the concrete strength at anytime, anywhere, and any smart PC devices. Finally, by integrating the proposed QR code-based concrete labeling with the concrete strength databases already prepared at a designated web-server, a feasibility of the current system is investigated for a next generation concrete life-cycle quality maintenance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.744-751
• /
• 2004

This paper presents the implementation of the low cost and high speed RF ATE(Automatic Test Equipment) system, which can be a reasonable solution for reducing the test cost of RF devices. This paper suggests high speed and precise measurement capabilities which are realized by the 16 independent RF ports with high speed switching time and high accuracy digitizer using the industry standard Versus module eXtensions for Instrument(VXI) General Purpose Interface Bus(GPIB) interfaces. Also, the system has the capabilities of quad-site test which can dramatically increase the device throughput. This paper concludes with the demonstration of the implemented ATE system through the setup of RF Power Amplifier Module(PAM), which is under the most competitive market situation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.819-827
• /
• 2007

A numerical algorithm for estimating precise backscattering coefficients of rice fields is proposed and its accuracy is verified in this paper. After a bunch of rice plants above water surface is modeled with a bunch of randomly oriented lossy dielectric bodies above an impedance surface and the equivalent volume currents of the lossy dielectrics are computed using the moment method. Then, the scattered fields of a rice field with many bunches are computed with a Monte Carlo method, and consequently the backscattering coefficient of the rice field is computed for various incidence angles and polarizations. Finally, the backscattering coefficient of a rice field is measured at 1.85 GHz using an R-band scatterometer system, and these experimental data are used to verify the numerical algorithm proposed in this paper. It is found that the numerical computation results agree well with the measurement data.

• The korean journal of orthodontics
• /
• v.22 no.4 s.39
• /
• pp.755-778
• /
• 1992

It is prerequisite of orthodontists to diagnose malocclusion correctly and make treatment plans accurately for treating maloccluded patients efficiently and earning more stable and better results. Recently computers were introduced in orthodontic diagnosis steps, which enabled orthodontists to get more precise diagnosis, to make more accurate treatment planning and to provide better orthodontic cares for more patients. The authors studied on the diagnostic analysis methods which have been used frequently in Korea and made a diagnostic computer program including the horizontal and/or vertical measurement of length, degrees and proportions in lateral cephalometric radiographs, the analysis of the skeletal and soft-tissue features and the evaluation of the treatment results. We also made a scheduling program for arrangement and management of patients. 40 skeletal and 24 soft-tissue landmarks were selected in a lateral cephalometric radiographs. The available analysis methods in this program are Angular analysis, Linear analysis, Ricketts analysis, Profilogram , Steiner analysis, Tweed analysis, MacNamara analysis, Open bite analysis, Kim's diagnosis, Skeleto-dental cephalometric analysis and Height & weight analysis. We suggested that this diagnostic computer program make it possible for orthodontists to get more rapid and accurate diagnostic analysis and treatment planning and for patient to earn better and more efficient orthodontic service.

• Journal of Sensor Science and Technology
• /
• v.3 no.1
• /
• pp.61-67
• /
• 1994

In order to investigate the effects of heat treatment on the thermoelectric motive force (EMF) of type R thermocouples, the changes of EMF in the freezing points of aluminum and silver cells were measured with the immersion depth of themocouples. With the variation of heat treatment methods before use, it was found that the EMF values were different from each other, maximum $17.1{\mu}V$ at $660.323^{\circ}C$ and $18.1{\mu}V$ at $961.78^{\circ}C$. Additionally a thermocouple, which was not heat-treated fully, showed an EMF difference with the immersion depth even though it was located on the region maintained at the constant temperature. The measured differences were about maximum $7.8{\mu}V$ at the Al freezing point and $18.9{\mu}V$ at the Ag freezing point. It was recongnized that a thermocouple for the precise temperature measurement should be heat-treated carefully before service. In this report, the proper heat treatment methods for the type R thermocouple were given on the basis of the obtained experimental results.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.373-378
• /
• 2012

The purpose of this study was to develop an electric riding machine for cycle fitting to control riding posture easily, to measure frame size quantitatively, and to overcome disadvantages of the traditional systems. The electric riding machine consisted of actuator, load controller, and display & control unit. The actuator unit by BLDC(BrushLess Direct Current) motor drives the saddle height up and down, the crank forward and backward, the handlebar up and down, and the handlebar forward and backward. The load controller unit controls loads by Eddy current controller with electromagnet and aluminum circular plate. The display & control unit consisted of frame size controller and display panel which shows top tube length(485~663mm), head tube length(85~243mm), seat tube length(481~671mm), and seat tube angle($62.7{\sim}76.4^{\circ}$). The range of frame size control for developed electric riding machine did not have difference compared to traditional commercial systems, but quantitative and precise control with 0.1 mm length and $0.1^{\circ}$ angle was possible through digital measurement. Unlike traditional commercial systems, frame size control was possible during riding through motor driven method, thus fitting duration decreased. It is necessary for further improvement to have feedback from users. It is believed that developed electric riding machine can help to develop domestic fitting system.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.482-488
• /
• 2012

To fabricate a precise micro metal mold, the electrochemical etching process has been researched. We investigated the electrochemical etching process numerically and experimentally to determine the etching tendency of the process, focusing on the current density, which is a major parameter of the process. The finite element method, a kind of numerical analysis, was used to determine the current density distribution on the workpiece. Stainless steel(SS304) substrate with various sized square and circular array patterns as an anode and copper(Cu) plate as a cathode were used for the electrochemical experiments. A mixture of $H_2SO_4$, $H_3PO_4$, and DIW was used as an electrolyte. In this paper, comparison of the results from the experiment and the numerical simulation is presented, including the current density distribution and line profile from the simulation, and the etching profile and surface morphology from the experiment. Etching profile and surface morphology were characterized using a 3D-profiler and FE-SEM measurement. From a comparison of the data, it was confirmed that the current density distribution and the line profile of the simulation were similar to the surface morphology and the etching profile of the experiment, respectively. The current density is more concentrated at the vertex of the square pattern and circumference of the circular pattern. And, the depth of the etched area is proportional to the current density.

• Journal of Biomedical Engineering Research
• /
• v.30 no.5
• /
• pp.418-427
• /
• 2009

As many people are westernizing their life style and food consumption habits, a number of patients who have malignant tumors which grow very rapidly and hazardously destroy the human body are increasing. Ultrasonic hyperthermia is not only one of the tumor treatment methods which employs the non-radioactive ultrasonic waves to increase the temperature at the tumor region up to $40\sim45^{\circ}C$ to destroy and suppress tumor cells but also has been proved by many studies. Due to the rapid development of High Intensity Focused Ultrasound(HIFU), the ultrasound hyperthemia extensively boosts its applications in clinical field. For those reasons, Computed simulation factor should be needed before inspection to patients. To prove efficiency of ultrasonic hyperthermia, precise acoustic field measurement considering tissue characteristics and a heating experiment with tissue mimicking material phantom were conducted for effectiveness of simulation program. Finally, in this study, the computer simulation program verified the anticipated temperature effects induced by ultrasound hyperthermia. In the near future, it is hoped that this simulation program could be utilized to improve the efficiency of ultrasound hyperthermia.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.722-727
• /
• 2018

Until now, the study of fine dust has been divided into prediction, analysis and measurement, mainly in the field of atmospheric environment. Fine dust is caused by various causes such as atmospheric quality factor, meteorological factor and emission. It was determined that it was a priority to analyze the correlation of how much each element affects fine dust, and it was experimented. This correlation analysis was done using IBM SPSS tool using air quality factor and meteorological factor data obtained from Korea Meteorological Administration and Air Korea. As a result, the influence of air quality factors and meteorological factors on the fine dust level was more clearly understood. In this paper, we present experimental results as correlation analysis and pearson coefficient for more precise analysis between PM10 values and affected factors.