• Journal of Korea Water Resources Association
• /
• v.50 no.10
• /
• pp.653-660
• /
• 2017

The SCS-CN (Soil Conservation Service-Curve Number) method has been practically applied for estimating the effective precipitation. The CN is used to be determined according to the land use condition based on the US standard. However, there are two distinctive differences between U.S. and Korean land use conditions: mountainous (forest) and rice paddy area that cover more than 70% of the Korean territory. The previous work proposed to use 79 for rice paddy area, regardless of the soil type. Because US SCS's goal was originally to increase crops, the SCS classification standard provides only for woods and there are no criteria to distinguish the wood and forest. To determine the CN for forest, alternatively the U.S. Forest Service criteria have been employed in practice considering hydrologic condition class. In this study, we investigated the change of the forest CN using the observed rainfall - runoff data within the target area. The results indicated that the CN for forest was suitable for HC=1, and the corresponding CNs were redetermined between 54 and 55.

• Journal of Korea Water Resources Association
• /
• v.48 no.3
• /
• pp.185-196
• /
• 2015

A conceptual watershed model HSPF (Hydrological Simulation Program-Fortran) was applied to the Hwangryong river watershed to evaluate climate change effects on pollution loads of the river. For modeling purposes, the Hwangryong river watershed was divided into 7 sub-watersheds. The model was calibrated and validated for the river discharges against the data observed in 2011 at several monitoring stations. The RCP scenarios were set up for the model simulations after being corrected by change factor method. The simulation results of the RCP 4.5 scenario indicate that the annual river discharge and concentrations of BOD, TN, TP of the Hwangryong river will continually increase during the second-half of the 21st century. As for the RCP 8.5 scenario, the simulations results imply that the pollution loads will increase during the middle of the 21st century reflecting the pattern of precipitation. Monthly distributions of the pollution loads for the RCP 4.5 and the RCP 8.5 scenarios show it will increase the most in September and February, respectively.

• Journal of Korea Water Resources Association
• /
• v.49 no.5
• /
• pp.373-380
• /
• 2016

The NRCS-CN (Natural Resources Conservation Service-Curve Number) method has been practically applied for estimating the effective precipitation. However, there are no criteria which reflect the geographic characteristics of Korea having more than 70% of mountainous and rice paddy areas, leading to significant errors in runoff calculation. Thus, it is required to estimate the runoff curve number considered Korea land use classification, however there are practical difficulties to conduct the accurate research and experimentation. In this study, after selecting target areas (urban, agriculture, forest), we performed the runoff analysis to redetermine CN values for the selected basins. To do this, curve numbers for soil type A were estimated using genetic algorithm, and then curve numbers for soil type (B, C, D) were estimated using CN aligner equation. Comparing the initial curve numbers with the estimated curve numbers, it was observed that the slightly differences at Chunwang(0), Choonyang(-1), Janggi(-3). Through the above process, this study proposed new curve numbers to reflect observed rainfall-runoff.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.669-675
• /
• 2010

One of the greatest challenges for our society is providing powerful electrochemical energy conversion and storage devices. Rechargeable lithium-ion batteries and fuel cells are among the most promising candidates in terms of energy and power density. As the starting material, $TiCl_4{\cdot}YCl_3$ solution and dispersing agent (HCP) were mixed and synthesized using ammonia as the precipitation agent, in order to prepare the nano size Y doped spherical $TiO_2$ precursor. Then, the $Li_4Ti_5O_{12}$ was synthesized using solid state reaction method through the stoichiometric mixture of Y doped spherical $TiO_2$ precursor and LiOH. The Ti mole increased the concentration of the spherical particle size due to the addition of HPC with a similar particle size distribution in a well in which $Li_4Ti_5O_{12}$ spherical particles could be obtained. The optimal synthesis conditions and the molar ratio of the Ti 0.05 mol reaction at $50^{\circ}C$ for 30 minutes and at $850^{\circ}C$ for 6 hours heat treatment time were optimized. $Li_4Ti_5O_{12}$ was prepared by the above conditions as a working electrode after generating the Coin cell; then, electrochemical properties were evaluated when the voltage range of 1.5V was flat, the initial capacity was 141 mAh/g, and cycle retention rate was 86%; also, redox reactions between 1.5 and 1.7V, which arose from the insertion and deintercalation of 0.005 mole of Y doping is not a case of doping because the C-rate characteristics were significantly better.

• Journal of Powder Materials
• /
• v.17 no.4
• /
• pp.312-318
• /
• 2010

High speed steels (HSS) were used as cutting tools and wear parts, because of high strength, wear resistance, and hardness together with an appreciable toughness and fatigue resistance. Conventional manufacturing process for production of components with HSS was used by casting. The powder metallurgy techniques were currently developed due to second phase segregation of conventional process. The powder injection molding method (PIM) was received attention owing to shape without additional processes. The experimental specimens were manufactured with T42 HSS powders (59 vol%) and polymer (41 vol%). The metal powders were prealloyed water-atomised T42 HSS. The green parts were solvent debinded in normal n-Hexane at $60^{\circ}C$ for 24 hours and thermal debinded at $N_2-H_2$ mixed gas atmosphere for 14 hours. Specimens were sintered in $N_2$, $H_2$ gas atmosphere and vacuum condition between 1200 and $1320^{\circ}C$. In result, polymer degradation temperatures about optimum conditions were found at $250^{\circ}C$ and $480^{\circ}C$. After sintering at $N_2$ gas atmosphere, maximum hardness of 310Hv was observed at $1280^{\circ}C$. Fine and well dispersed carbide were observed at this condition. But relative density was under 90%. When sintering at $H_2$ gas atmosphere, relative density was observed to 94.5% at $1200^{\circ}C$. However, the low hardness was obtained due to decarbonization by hydrogen. In case of sintering at the vacuum of $10^{-5}$ torr at temperature of $1240^{\circ}C$, full density and 550Hv hardness were obtained without precipitation of MC and $M_6C$ in grain boundary.

• The Korean Journal of Quaternary Research
• /
• v.3 no.1
• /
• pp.87-101
• /
• 1989

The development of the Hantan river basin can be divided into three stages. The first stage include the ancient Hantan channel system prior to the Chongokni basalt which yield dates of about 0.6 mya from the K/Ar dating method. During this period the Baekuyri formation was formed. The Baekuyri formation is widely observed under the Chongokni basalt along the current river system. The second stage is the period when stream channels stayed on the top of the basalt plateau. Aggradation and deggradation were continued by meandering and braiding channel systems until major stream channel was formed. The currently remaining deposit on the top of the basalt was formed by lacustrine and fluvial systems in this period. During this period Pleistocene hominid was present on edge of water and flood plain and left Paleolithic material. This period was begun at the time of the final basalt flow dated about 300,000 BP. The third stage is designed for the time when the Hantan river channel was dropped down to a level from which the channel could not influence the top of the basalt any more No more deposit could be formed but erosion by surface water has been continued on the top of the basalt since then. The dropping of the Hantan river channel was probably not very long after the final flow of the basalt. Because of frost action and heavy concentrated precipitation in the basin area along with blocky and clumnar joint structure of the basalt, erosional process of the basalt is believed to have been carried out within a relatively short time. The lowering of the Hantan river channel was probably completed in a cycle of major fluctuation of world cimate. Also, the redclay on the top of the basalt is believed to have been formed during a warm period around 200,000 BP, which accords with the climatic change suggested above fair1y well. The Paleolithic materials in tile deposits fell accordingly into approximately same time period.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.322-326
• /
• 2013

This study was tried to control the weedy rice using minimum tillage direct seeding of rice on dry paddy. Minimum tillage direct seeding on dry paddy is tilled with 4 cm in width at 27 cm intervals by 1-shaped rotary blade. Using this cultivation method can control weedy rice effectively by minimizing the soil disturbance. In this study, weedy rice was firstly emerged at April 28 in 2012. After 11 days emergence rate of weedy rice at May 9 was 61.9%. At this time rice was sown and then herbicides was treated at 10 and 15 days after sowing. When herbicides was treated at 10 days after sowing the control effect was 89-96%, and when treated at 15 days the control effect was 97-99%. However emergence of weedy rice differ according to the year and year. It was thought to be affected by April average temperature and total precipitation. So, for effective weedy rice control and stable rice yield, it was considered that irrigation at April 15-20 to induce the emergence of weedy rice is required.

• Korean Journal of Ecology and Environment
• /
• v.38 no.2 s.112
• /
• pp.237-248
• /
• 2005

To determine the content of hazard microcystin (MC) in Han River system and Ecological Ponds in Seoul City and Kyunggi district, a most toxic derivative, microcystin-LR (MCLR) of 15 samples of 7 ponds, 4 rivers and 4 reservoirs during low precipitation and cold season in 2003 were analyzed by ELISA method. With the change of water temperature ($0.4\;{\sim}\;21.9^{\circ}C$), cyanobacteria including Microcystis aeruginosa dominated the cold phytoplankton community in small ecological ponds such as Kyungbokgung Kyunghyaeru (KBP), Seokchon reservoir (SCR), Yangsoori Ryukgakji (YSS), having the long residence time. Contents of MCLR (the detection limit; $0.05\;{\mu}g\;L^{-1}$) were high in cyanobacteria-rich sites, especially, Microcystis aeruginosa. Total MCLR, cell extracted type plus dissolved type, were $1.39\;{\mu}g\;L^{-1}$ in KBP, $0.55\;{\mu}g\;L^{-1}$ in SCR and $0.59\;{\mu}g\;L^{-1}$ in YSS, in the first sampling having a high temperature (>$20^{\circ}C$), while some detected only in YSS during the cold season. As expected, the MCLR content was correlated with Microcystis aeruginosa (r = 0.526 for cell extracted type, r = 0.433 for dissolved type). Therefore, low concentration of MCLR detected in small ponds and Han river system in Seoul metropolitan city and Kyunggi district, maybe hardly affect human recreation activity, especially the drinking water supply.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1143-1149
• /
• 2003

To elucidate a method of preventing dental caries, strains producing lytic enzymes were isolated and their characteristics were investigated. Among 5,00 alkalophilic strains isolated from soil, 22 strains showed lytic activity against Streptococcus mutans. Strain No. 4830, with the highest lytic activity, was selected for further study. Strain 4830 showed 94% sequence homology with the 16S rDNA sequence of Bacillus alcalophilus, but it was concluded to be different from Bacillus alcalophilus because of its biochemical characteristics. The strain was named Bacillus sp. 4830. The lytic enzyme from Bacillus sp. 4830 was purified by ethanol precipitation and CM-agarose column chromatography. The molecular weight of the lytic enzyme was determined to be 28 kDa by SDS-PAGE. The lytic enzyme was stable between pH 5.0 and pH 11 and up to $40^{\circ}C$. The optimal pH and temperature for the lytic activity was 9.0 and $50^{\circ}C$, respectively.

• Journal of Korea Water Resources Association
• /
• v.46 no.7
• /
• pp.755-765
• /
• 2013

This study developed a real-time dam's hydrologic variables prediction model (DHVPM) and evaluated its performance for simulating historical dam inflow and outflow in the Chungju dam basin. The DHVPM consists of the Sejong University River Forecast (SURF) model for hydrologic modeling and an autoreservoir operation method (Auto ROM) for dam operation. SURF model is continuous rainfall-runoff model with data assimilation using an ensemble Kalman filter technique. The four extreme events including the maximum inflow of each year for 2006~2009 were selected to examine the performance of DHVPM. The statistical criteria, the relative error in peak flow, root mean square error, and model efficiency, demonstrated that DHVPM with data assimilation can simulate more close to observed inflow than those with no data assimilation at both 1-hour lead time, except the relative error in peak flow in 2007. Especially, DHVPM with data assimilation until 10-hour lead time reduced the biases of inflow forecast attributed to observed precipitation error. In conclusion, DHVPM with data assimilation can be useful to improve the accuracy of inflow forecast in the basin where real-time observed inflow are available.