• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.91-91
• /
• 2011

In the present study, the proposed EMD and NSOR models has been applied in hydrology and climate sciences. Here, we present those applications as the following: (1) to extend future scenarios of Global Surface Temperature Anomaly including long-term oscillation component; (2) to extend the future evolution of the Eastern Canada winter precipitation; (3) to apply EMD in detecting climate change.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.346-351
• /
• 2002

Pure and fine, two-component titanate powders (barium titanate, calcium titanate etc.) were synthesized by an ethylene glycol method. Titanium isopropoxide and other metal ionic salts were dissolved in liquid-type ethylene glycol without any precipitation. In non-aqueous system, the amount of ethylene glycol affected the solubility and homogeneity of metal cation sources in the solution. At the optimum amount of the polymer, the metal ions were dispersed effectively in solution and a homogeneous polymeric network was formed. Most of the synthesized powders had sub-micron or nano-size primary particles after calcination and the agglomerated calcined powders were easily ground by ball milling process. All synthesized titanate powders had stable crystallization behavior at low temperature and high specific surface area after ball milling. The crystallization behavior and the microstructures of the calcined powders were affected on the ethylene glycol content.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.440-441
• /
• 2006

Several titanate powders ($Al_2TiO_5,\;SrTiO_3$, etc.) were synthesized by an ethylene glycol solution route. Titanium isopropoxide and nitrate salts were dissolved in stoichiometric proportions in liquid-type ethylene glycol without any precipitation. The parent precursor sols were dried to porous gels, and then the gels were calcined and crystallized. All synthesized titanate powders had stable crystallization behavior at low temperature and high specific surface area after a simple ball-milling process. A three-component PZT $(Pb(Zr_{0.52}{\cdot}Ti_{0.48})O_3)$ powder was also synthesized successfully by the ethylene glycol method. In this study, the characteristics of the multi-component titanate powders by the ethylene glycol method are examined.

• 한국대기환경학회지
• /
• 제13권1호
• /
• pp.51-63
• /
• 1997

Total suspended particulate matters in the ambient air were analyzed for eight chemical elements (Ca, Co, Cu, Fe, Mn, Pb, Si, and Zn) using an x-ray fluorescence spectrometry (XRF) at the Kyung Hee University - Suwon Campus during 1989 to 1994. To use these data as basis for source identification study, membership of each sample was selected to represent one of the well defined sample groups. The data sets consisting of 83 objects and 8 variables were initially separated into two groups, fine (d$_{p}$<3.3 ${\mu}{\textrm}{m}$) and coarse particle groups (d$_{p}$>3.3 ${\mu}{\textrm}{m}$). A hierarchical clustering method was examined to obtain possible member of homogeneous sample classes for each of the two groups by transforming raw data and by applying various distances. A disjoint principal component analysis was then used to define homogeneous sample classes after deleting outliers. Each of five homogeneous sample classes was determined for the fine and the coarse particle group, respectively. The data were properly classified via an application of logarithmic transformation and Euclidean distance concept. After determining homogeneous classes, correlation coefficients among eight chemical variables within all the homogeneous classes for calculated and meteorological variables (temperature. relative humidity, wind speed, wind direction, and precipitation) were examined as well to intensively interpret environmental factors influencing the characteristics of each class for each group. According to our analysis, we found that each class had its own distinct seasonal pattern that was affected most sensitively by wind direction.ion.

• 한국산림과학회지
• /
• 제96권5호
• /
• pp.561-566
• /
• 2007

This study was conducted to clarify runoff production processes in forested catchment through hydrograph separation using three-component mixing model based on the End Member Mixing Analysis (EMMA) model. The study area is located in the coniferous-forested experimental catchment, Gwangneung Gyeonggido near Seoul, Korea (N 37 45', E 127 09'). This catchment is covered by Pinus Korainensis and Abies holophylla planted at stocking rate of 3,000 trees $ha^{-1}$ in 1976. Thinning and pruning were carried out two times in the spring of 1996 and 2004 respectively. We monitored 8 successive events during the periods from June 15 to September 15, 2005. Throughfall, soil water and groundwater were sampled by the bulk sampler. Stream water was sampled every 2-hour through ISCO automatic sampler for 48 hours. The geochemical tracers were determined in the result of principal components analysis. The concentrations of $SO_4{^{2-}$ and $Na^+$ for stream water almost were distributed within the bivariate plot of the end members; throughfall, soil water and groundwater. Average contributions of throughfall, soil water and groundwater on producing stream flow for 8 events were 17%, 25% and 58% respectively. The amount of antecedent precipitation (AAP) plays an important role in determining which end members prevail during the event. It was found that ground water contributed more to produce storm runoff in the event of a small AAP compared with the event of a large AAP. On the other hand, rain water showed opposite tendency to ground water. Rain water in storm runoff may be produced by saturation overland flow occurring in the areas where soil moisture content is near saturation. AAP controls the producing mechanism for storm runoff whether surface or subsurface flow prevails.

• 한국표면공학회지
• /
• 제1권1호
• /
• pp.5-13
• /
• 1967

Up to this date, numerous methods of analysis of electropling solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelop countries, technicians of electroplating shops are most high school graduates or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equipment . Therefore, in this paper the simplest, besides accurate method is investigated after comparing numerous methods published. Among the methods of copper determinations from acid and alkaline copper plating baths, EDTA titration method are chosen, due to these methods are the simpest and fastest for the evaluation of metal content, without requirng any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of indicators and other metal's coexisitence as well as solution component, many difficulties were encountered from cyanide copper, on the contrary of acid copper bath. PAN , PV, and MX indicators were tried , but it is found that MX is the best. In chyanide solution ,due to cyanide is the masking reagent , elimination of this component is essential , and finally found that elimination CN-by precipitation with AgNO$_3$ solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method form time to time, before chelate titration by means of AgNO$_3$ precipitation. Always some constant deviations will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.

• 한국수자원학회논문집
• /
• 제49권9호
• /
• pp.731-740
• /
• 2016

본 연구에서는 청주시 청원군에 위치한 수막재배 소유역을 대상으로 2010년부터 2015년까지의 수문성분 분석을 수행하고 강수에 따른 자연 지하수 함양량의 월별 변화를 살펴보았다. 그 결과 강수량의 크기에 따라 증발산량, 지표유출량, 지하수 함양량의 비율이 다르게 나타나며 강수에 대한 각 요소의 상관성이 해마다 다르게 나타남을 알 수 있었다. 강수량 대비 연 함양률은 최소 8.3~19%까지 나타났으며 강수에 대한 함양량의 결정계수도 0.39~0.94로 변화폭이 큰 것으로 나타났다. 특히 2015년과 같은 갈수년의 경우 저조한 강수량으로 인해 자연 지하수 함양이 제대로 이뤄지지 않아 지하수위는 지속적으로 하강하는 것으로 나타났다. 따라서 수막재배지역을 대상으로 하는 특별한 지하수 개발가능량 산정방법이 도입되어야 할 것으로 판단된다.

• 대한원격탐사학회지
• /
• 제37권6_2호
• /
• pp.1859-1867
• /
• 2021

본 연구는 부산지역의 봄철과 여름철 대기 중 미세먼지(particulate matter, PM) 농도 및 빗물 수질을 정량화하고 다변량 통계분석을 이용하여 계절(봄, 여름) 특성에 따른 대기 중 PM 농도가 빗물 수질에 미치는 영향을 평가하였다. 연구기간(2020년 3월-8월)동안 기상청 AWS (automatic weather system)에서 측정된 대기 중 PM 농도와 총 68번의 강우 특성 자료를 이용하였으며, 총 68번의 강우 이벤트 중 13회 강우를 대상으로 부산 부경대학교 캠퍼스에 집수장치를 설치하여 총 216개의 빗물 샘플을 수집하였다. 빗물의 pH와 전기전도도(electrical conductivity, EC)는 실시간 측정되었으며, 빗물 내 양이온(Na⁺, Mg²⁺, K⁺, Ca²⁺, and NH₄⁺) 및 음이온(Cl^-, NO₃^-, and SO₄^2-) 농도를 분석하였다. 또한, 자체 제작한 미세먼지 센서를 이용하여 강우 전후로 대기 중 PM₁₀ 농도를 측정하였으며, 측정된 데이터를 바탕으로 주성분 분석(principal component analysis, PCA)과 피어슨 상관분석(Person correlation analysis)을 실시하여 대기 중 PM₁₀ 농도와 빗물 수질 간 상관관계를 규명하였다. 연구결과, 부산지역의 일평균 대기 중 PM 농도 및 강우 특성은 계절적 차이가 존재하였으며, 대기 중 PM₁₀ 농도와 빗물 수질간 상관성 또한 상이하게 나타났다. 봄철의 경우, 일평균 대기 중 PM₁₀ (34.11 ㎍/m³) 및 PM_2.5 (19.23 ㎍/m³)의 평균 농도는 상대적으로 높게 나타났고 일평균 누적 강우량 및 강우 강도는 상대적으로 낮게 나타났다. 또한, 대기 중 PM₁₀ 농도는 빗물 수질과 유의미한 상관관계를 보였으며 대기 중 PM₁₀ 농도는 pH (r = -0.84)는 감소시키고 EC (r = 0.95) 및 수용성 음이온(r = 0.99) 농도는 증가시키는 요인으로 작용하였다. 여름철의 경우에는 일 평균 PM₁₀ (27.79 ㎍/m³) 및 PM_2.5 (17.41 ㎍/m³)의 평균 농도가 상대적으로 낮은 농도 분포를 보였으며, 최대 일 평균 강우 강도는 81.6 mm/h로 오랜 시간 많은 양의 비를 기록하였다. 상대적으로 낮은 대기 중 PM 농도와 높은 강우 강도로 인해 대기 중 PM₁₀ 농도가 빗물 수질에 미치는 영향을 확인할 수 없었다.

• 한국환경보건학회지
• /
• 제20권4호
• /
• pp.1-9
• /
• 1994

In order to investigate the regional level of air pollutants at Kangwha island situated on the western coast in Korea, the suspended particulate matter samples were collected by using the low volume air sampler on ten interval from March 1992 to February 1993 and the mass concentration of suspended particulate matter (SPM) and the chemical composition of water-soluble major ionic components in SPM samples were measured. During the sampling period, the average concentration of SPM under diameter 10 $\mu$m was found to be 48 $\mu$g/m$^3$ (+ 12). The seasonal concentration of SPM was showed in order of spring>fall>winter>summer. It was considered that higher concentration on spring than other season was affected by the long-range transport of Yellow sand particulate from China continent and lower concentration on summer by the washout and rainout effect of large rainfall. The content of water-soluble component in SPM samples was founded to be about 31% (14.69 $\mu$g/m$^3$) and 65% was unknown or unanalyzed. The content of cationic component showed in order of NH$_4^+$ (44.6%)>Na$^+$ (21.2%)>K$^+$ (14.7%)>Ca$^{2+}$ (13.6%)>Mg$^{2+}$ (5.9 %) and the content of anionic component SO$_4^{2-}$ (62.5%)>NO$_3^-$ (22.3%)>Cl$^-$ (15.2%), respectively. This fact indicates that ammonium and sulfate ion of water-soluble component in SPM sample were dominant in this region. From the chemical composition of water-soluble component, the most of Na$^+$, Mg$^{2+}$ and Cl$^-$ were originated from seawater source but K$^+$, Ca$^{2+}$ and SO$_4^{2-}$ were originated from other non-marine source. The contribution of seasalt to the composition of precipitation was 23%.

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.45-52
• /
• 1997

It is the problem point of stability for this study to produce cosmetics and to occur in the circulation process, and specially in a case of alcoholic toilet water the precipitation materials to float on content materials has study on the solubility of perfume, and it has practiced in order to examine the problem point whether the raw materials of plastic vessel is or not harmful in content materials. In testing result, A study on stability of alcoholic toilet water is above all the precipitation materials which floats in content materials, and It is appeared by combination ratio to the raw materials of perfume, ethanol, solubilizer and refining water etcs, and in second the alkali degree which has gushed out of glass vessel can understand the thing that the change of PH is largely increased following to the passage of time, and in third the harmful component of content materials out of raw material in plastics vessel must certainly consider a stability and a safety in quality control of products.