• 제목/요약/키워드: Precipitation Effect

검색결과 1,228건 처리시간 0.027초

토양 내 저장 강수율을 활용한 국내 표층 토양수분 메모리 특성에 관한 연구 (Surface soil moisture memory using stored precipitation fraction in the Korean peninsula)

  • 김기영;이슬찬;이용준;연민호;이기하;최민하
    • 한국수자원학회논문집
    • /
    • 제55권2호
    • /
    • pp.111-120
    • /
    • 2022
  • 물의 흐름을 제어하는 토양의 기능을 정량적으로 계산하기 위한 방법인 토양수분 메모리(soil moisture memory)는 토양에 도달한 강수가 저장되고 배출되기까지 평균적으로 체류하는 시간을 평가한다. 본 연구에서는 2019, 2020년 한반도 지역에서 강수와 토양수분 위성 기반 모델 산출물을 활용하여 표층(0~5 cm)토양에서의 토양수분 메모리를 산출하고 이를 활용하여 연구지역 내 토양수분 메모리의 시공간적인 분포를 지표면의 경사 및 토양의 특성과 함께 평가하였다. 토양수분 메모리를 특성분석을 위해 강수 사건에 따라 토양수분의 증가를 추적하여 저장 강수율(Fp(f))이라는 새로운 측정 지표를 활용하였다. 강수 발생 초기(3시간 후)에는 산맥을 기준으로 토양 내 저장 강수율이 우선적으로 감소하여 토양수분 메모리의 공간적인 편차가 컸으며 24시간 이후 전반적으로 편차가 감소하였다. 토양 내 저장 강수율은 경사가 증가할수록 감소하는 형태가 뚜렷하게 나타났으며 토양 입자 크기의 구성 비율에 따른 토양 내 수분의 배수 활동에 의한 영향을 확인할 수 있었다. 또한 수리전도도 증감에 기여하는 평균토양수분이 저장 강수율에 미치는 영향을 확인하였다. 본 연구 결과는 강수가 지면에 체류하는 시간에 대한 척도인 토양수분 메모리가 지표의 경사와 토양 특성과 갖는 관계를 규명하고 토양수분의 시공간적 변동성을 이해하는 데 기여할 것으로 기대된다.

오스테나이트화 온도에 따른 보론강의 경화능과 인장 특성 (Effect of Austenitizing Temperature on the Hardenability and Tensile Properties of Boron Steels)

  • 황병철
    • 한국재료학회지
    • /
    • 제25권9호
    • /
    • pp.497-502
    • /
    • 2015
  • The hardenability of boron steel specimens with different molybdenum and chromium contents was investigated using dilatometry and microstructural observations, and then was quantitatively measured at a critical cooling rate corresponding to 90 % martensite hardness obtained from a hardness distribution plotted as a function of cooling rate. Based on the results, the effect of an austenitizing temperature on the hardenability and tensile properties was discussed in terms of segregation and precipitation behavior of boron atoms at austenite grain boundaries. The molybdenum addition completely suppressed the formation of pro-eutectoid ferrite even at the slowest cooling rate of $0.2^{\circ}C/s$, while the chromium addition did at the cooling rates above $3^{\circ}C/s$. On the other hand, the hardenability of the molybdenum-added boron steel specimens decreased with an increasing austenitizing temperature. This is associated with the preferred precipitation of boron atoms since a considerable number of boron atoms could be concentrated along austenite grain boundaries by a non-equilibrium segregation mechanism. The secondary ion mass spectroscopy results showed that boron atoms were mostly segregated at austenite grain boundaries without noticeable precipitation at higher austenitization temperatures, while they formed as precipitates at lower austenitization temperatures, particularly in the molybdenum-added boron steel specimens.

태풍 루사와 관련된 WRF의 수치모의 결과 분석 (A Qualitative Analysis of WRF Simulation Results of Typhoon 'Rusa' Case)

  • 김진원;이재규
    • 대기
    • /
    • 제17권4호
    • /
    • pp.393-405
    • /
    • 2007
  • Simulation results of WRF for the case of typhoon 'Rusa' were analyzed, comparing with observed data especially forjavascript:confirm_mark('abe', '1'); the Gangneung area around to examine its ability in numerical simulation. From the hourly precipitation time series, two peaks were found at Gangneung and Daegwallyeong, while only one peak was found from those of inland regions else. Especially, for the Yeongdong region, the first peak was directly related to spiral bands generated in front of the typhoon. Convective cells that were developed within the spiral bands moved to the eastern coastal area from the sea so that local heavy rainfall occurred in the Yeongdong region. The second peak was mainly related to the accompanying rain band of typhoon itself, topographic effect and the convergence near Gangneung area. Precipitation in Gangneung was simulated as much as about 30% of observed one. The main reason of this result came from a poor representation of wind directions in Gangneung area of WRF model. Observed wind direction was northwesterly but simulated one was nearly easterly in the area. This might shift a local heavy rainfall area downstream to the mountain area rather than the coastal area.

종분포모형을 이용한 히어리 서식지의 분포 특성 연구 (A Study on Distribution Characteristics of Corylopsis coreana Using SDM)

  • 권혁수;류지은;서창완;김지연;임동옥;서민환
    • 환경영향평가
    • /
    • 제21권5호
    • /
    • pp.735-743
    • /
    • 2012
  • Since the CBD(Conservation on Biological Diversity)'s 10th Conference of the Parties adopted the protocol on access to genetic resources and benefit sharing in Nagoya 2010, the importance of endangered species studies such as habitat distribution, protection and management have been more emerged. Corylopsis coreana, an endangered species in Korea, was isolated nationally and has been damaged by anthropogenic factors. In this paper, we identified the factors affecting C. coreana habitat at the national scale and regional scale using National Survey of Natural Environment and predicted the distribution of C. coreana. Annual precipitation, precipitation of wettest quarter, temperature seasonality and Digital Elevation Model(DEM) were derived as important factors at the national scale, and precipitation of wettest quarter, DEM and solar radiation on spring were identified as important factors at regional scale. Colylopsis distribution was affected by an effect of climate significantly at the national scale, and by additionally the microclimate and topography at regional scale. These findings will be used as the basis on habitat conservation and restoration plan and climate change.

SUS 316鋼 의 高溫低사이클 피勞擧動 에 미치는 粒界절出物 의 影響 (Effect of grain boundary precipitation on low-cycle fatigue behavior aat elevated temperature of SUS 316 stainless steel)

  • 오세욱;국미무;산전방박;좌등철
    • 대한기계학회논문집
    • /
    • 제4권4호
    • /
    • pp.152-159
    • /
    • 1980
  • The temperature and the grain boundary precipitation have the great influence on the low-cycle fatigue behavior of austenite stainless steel at elevated temperature. For the purpose of investigating the mechanism concerning the change of fatigue micro crack mode in SUS 316 under various conditions low-cycle fatigue test was carried out at the elevated temperature 600.deg.C, plastic strain range 2% and constant strain rate .5c.p.m. A special attention is given to the observation of intergranular crack initiation. The results obtained are summarized as follows. The low-cycle fatigue behavior of SUS 316 at 600.deg.C is affected by transition of crack initiation mode from intergranular to transgranular. The transition is due to the aging effect, which is caused by grain boundary precipitations of Cr$\_$23/C$\_$6/. Since the intergranular crack initiation is brought about by the grain boundary sliding, the transgranular crack initiates in case that the strengthening of grain boundary due to the precipitation of Cr$\_$23/C$\_$6/ carbides takes place ahead of the intergranular crack initiation.

7N01 Al 합금의 미세조직 및 기계적 성질에 미치는 시효처리의 영향 (Effect of Aging Treatment on the Microstructures and Mechanical Properties of 7N01 Aluminium Alloy)

  • 황윤구;강민철;강정윤;김인배
    • 열처리공학회지
    • /
    • 제13권2호
    • /
    • pp.103-107
    • /
    • 2000
  • Effect of aging treatment on the microstructures and mechanical properties of 7N01 Al alloy was investigated by differential scanning calorimetry, transmission electron microscopy, microhardness measurement and tensile test. Maximum hardness(125.7Hv) and tensile strength(447.3MPa) were obtained from the specimen aged at $120^{\circ}C$ for 32hrs. The major precipitation hardening phase was confirmed as coherent $MgZn_2({\eta}^{\prime})$ phase. Microhardness changes after peakaged condition showed very large decrease upon increased aging time. This result was attributed to the high transformation rate from coherent ${\eta}^{\prime}$ to incoherent ${\eta}$. It was found that the precipitation sequence of 7N01 Al alloy was GP zone${\rightarrow}$metastable spherical hcp $MgZn_2({\eta}^{\prime}){\rightarrow}$ equilibrium rodlike hcp $MgZn_2({\eta})$.

  • PDF

열처리를 통한 Si 고용 및 석출 반응이 Al-Si 합금의 열확산도에 미치는 영향 (Effect of Precipitation and Dissolution of Si on the Thermal Diffusivity in the Al-Si Alloy System)

  • 김유미;김영찬;최세원
    • 한국재료학회지
    • /
    • 제30권9호
    • /
    • pp.474-479
    • /
    • 2020
  • The effect of precipitation and dissolution of Si on the thermal diffusivity in the Al-Si alloy system is reported in this study and solution heat treatment followed by aging treatment is carried out to determine the effects of heat treatment on the thermal characteristics. The solution treatment is performed at 535 ℃ for 4 and 10 h and then the specimens are cooled by rapid quenching. The samples are aged at 300 ℃ for 4 h to precipitate Si solute. The addition of 9 wt% silicon contents makes the thermal diffusivity decrease from 78 to 74 mm/s2 in the cases of solid solution treated and quenched samples. After quenching and aging, the Si solute precipitates on the Al matrix and increases the thermal diffusivity compared with that after the quenched state. In particular, the increase of the thermal diffusivity is equal to 10 mm/s2 without relation to the Si contents in the Al-Si alloy, which seems to corresponded to solute amount of Si 1 wt% in the Al matrix.

고활성 ITO (Indium-Tin Oxide) 나노 분말을 침전법으로 합성시의 공정 변수 및 존재하는 이온의 영향 (Effect of Process Variables and exisisting Ions on Highly Active Nano-sized ITO Powders Prepared by Precipitation Method)

  • 이인규;노봉현
    • 한국분말재료학회지
    • /
    • 제15권6호
    • /
    • pp.450-457
    • /
    • 2008
  • The objectives of this study were the development of a synthesis technique for highly active nanosized ITO powder and the understanding of the reaction mechanisms of the ITO precursors. The precipitation and agglomeration phenomena in ITO and $In_{2}O_{3}$ precursors are very sensitive to reaction temperature, pH, and coexisting ion species. Excessive $Cl^-$ ion and $Sn^{+4}$ ions had a negative effect an synthesizing highly active powders. However, with a relevant stabilizing treatment the shape and size of ITO and $In_{2}O_{3}$ precursors could be controlled and high density sintered products of ITO were obtained. By applying the reprecipitation process (or stabilization technique), highly active ITO and $In_{2}O_{3}$ powders were synthesized. Sintering these powders at $1500^{\circ}C$ for 5 hours produced 97% dense ITO bodies.

영동 대설과 관련된 낮은 층운형 구름의 위성관측 (Satellite Image Analysis of Low-Level Stratiform Cloud Related with the Heavy Snowfall Events in the Yeongdong Region)

  • 권태영;박준영;최병철;한상옥
    • 대기
    • /
    • 제25권4호
    • /
    • pp.577-589
    • /
    • 2015
  • An unusual long-period and heavy snowfall occurred in the Yeongdong region from 6 to 14 February 2014. This event produced snowfall total of 194.8 cm and the recordbreaking 9-day snowfall duration in the 103-year local record at Gangneung. In this study, satellite-derived cloud-top brightness temperatures from the infrared channel in the atmospheric window ($10{\mu}m{\sim}11{\mu}m$) are examined to find out the characteristics of clouds related with this heavy snowfall event. The analysis results reveal that a majority of precipitation is related with the low-level stratiform clouds whose cloud-top brightness temperatures are distributed from -15 to $-20^{\circ}C$ and their standard deviations over the analysis domain (${\sim}1,000km^2$, 37 satellite pixels) are less than $2^{\circ}C$. It is also found that in the above temperature range precipitation intensity tends to increase with colder temperature. When the temperatures are warmer than $-15^{\circ}C$, there is no precipitation or light precipitation. Furthermore this relation is confirmed from the examination of some other heavy snowfall events and light precipitation events which are related with the low-level stratiform clouds. This precipitation-brightness temperature relation may be explained by the combined effect of ice crystal growth processes: the maximum in dendritic ice-crystal growth occurs at about $-15^{\circ}C$ and the activation of ice nuclei begins below temperatures from approximately -7 to $-16^{\circ}C$, depending on the composition of the ice nuclei.

오랜 가뭄 뒤 내린 비에 대한 긍정적 측면의 경제적 가치 연구: 2009년 4월 20~21일 강수 사례 중심으로 (A Study on the Positive Economic Values of Rain After a Long Drought: for the Rainfall Case of 20~21 April, 2009)

  • 이영곤;김백조;차기욱;박길운;류경식
    • 대기
    • /
    • 제20권2호
    • /
    • pp.173-186
    • /
    • 2010
  • The impact of the precipitation has been focused on losses in social and economical sectors. However, as growing the concerns of the future water shortage caused by the climate change, the precipitation should be consider in various views for an effective planning in the water resource management. A precipitation case occurred from 20 to 21 April 2009 was recorded as a welcome rain because it reduced the severe drought continued in Korea from winter season of 2008. In this study, economic values of the event was calculated with positive aspects in various sectors. The estimation is based on four major parts such as a secure of water resources, the improvement of air quality, the decrease of forest fires, and the reduction of the drought impact. The water resources only considered inflow waters into dams and the reservoirs managed by Korean public institutions and their economic values accounts for 5.92 billion won. Decreases of four air pollutants($PM_{10}$, $NO_2$, CO, and $SO_2$) were considered as the positive effects of the rainfall and estimated 175.4 billion won. The preventive effect of the forest fire after the rainfall results in 0.48 billion won. Finally, the rainfall during the drought period is effective to reduce the social costs of 108.65 billion won. Although the economic values estimated in this study explain parts of the positive effects of the precipitation, it can help to develop a comprehensive and systematic valuation system for the whole process of the precipitation. For doing this, various rainfall types should be analyzed in social-economic terms including economics, environments and hydrology.