• 제목/요약/키워드: Precipitate

검색결과 711건 처리시간 0.024초

X-Ray Diffraction Studies of Uranyl Hydrolysis Precipitates Synthesized in Neutral to Alkaline Aqueous Solutions

  • 박용준;표형렬;김원호;전관식
    • Bulletin of the Korean Chemical Society
    • /
    • 제17권10호
    • /
    • pp.925-929
    • /
    • 1996
  • Uranyl hydrolysis precipitates were obtained by increasing pH value of aqueous uranyl solution in the range of neutral to alkaline pH value and their phase transformation during the solubility experiment under various conditions has been examined. The precipitates formed in the hydrolysis reaction of uranyl ion had a layered structure such as a meta-schoepite phase, a schoepite structure, or a mixed phase of meta-schoepite and schoepite. Phase transformation between them was strongly dependent on the pH value at which the precipitate was formed. The distance between the layers in meta-schoepite or schoepite phase was ∼7.35 Å, and it was increased with the pH value at which the precipitate was synthesized as well as the pH values of the aqueous solution. The phase transformation from a meta-schoepite to schoepite was fast for the precipitates formed at low pH values, however, it was not the case for the precipitates formed at high pH values. A small difference of pH value in aqueous solution gave a great change on its solubilities near pH 9.7, because a layered structure of the precipitates became amorphous above that pH value. Greater solubility for the precipitate formed at higher pH value can be explained from the fact that the precipitates formed at low pH value had a better crystallinity and also that the precipitates formed at higher pH value has a slower rate of crystallization.

경남 고성군 삼산면 삼산제일광산과 삼봉광산 주변 하천 침전물에 관한 예비 연구 (The Preliminary Study of the Secondary Precipitates from Samsanjeil and Sambong Mine, Goseong, Gyeongnam)

  • 조현구;장병준;김순오;추창오
    • 한국광물학회지
    • /
    • 제19권3호
    • /
    • pp.129-138
    • /
    • 2006
  • 경남 고성군 삼산제일광산과 삼봉광산의 폐석 적치장 하류 하천에서 발견된 2차 침전물을 주사 전자현미경 관찰, 전자현미분석 및 X선회절분석을 실시하여 그 실체를 규명하였다. 이 두 광산은 모두 구리 황화염 광물을 주 대상으로 채광하던 곳인데, 현재는 모두 폐광 중이다. 삼봉광산의 경우 흰색 침전물과 청색 침전물, 삼산제일광산의 경우 녹색 침전물이 발견된다. 흰색 침전물은 장축 $10{\mu}m$, 단축 $3{\mu}m$ 정도의 규조류가 약 $30{\mu}m$ 두께로 기존 암석을 피복하고 있는 것인데, 이 규조류는 담수에 서식하는 우상류의 일종인 Fragilaria construens이다. 청색 침전물은 황동석이 용탈되어 변질된 것인데, 변질 결과 Cu:Fe 비가 약 5에서 13으로 증가한다. 녹색 침전물은 $200{\sim}300nm$, 지름은 $200{\sim}300nm$ 정도의 벌레 모양을 가지고 있는 물질이 피복하고 있는데, 이들은 2차적으로 형성된 woodwardite같은 구리의 황산염이 주를 이루고 있는 것으로 여겨진다. 구리의 함량이 현재까지 보고된 구리 황산염 광물에 비하여 월등히 높은 점으로 볼 때 미생물의 활동과 관련이 있다고 생각된다. 이 물질의 정확한 동정을 위해서는 추가적인 연구가 더 필요하다.

침전 포말부선법에 의한 Cobalt Ion의 제거 (Removal of Cobalt Ions by Precipitate Foam Flotation)

  • 정인하;이정원
    • 자원리싸이클링
    • /
    • 제7권3호
    • /
    • pp.11-16
    • /
    • 1998
  • 모의폐액으로 제조한 50ppm의 코발트이온을 sodium lauryl sulfate 계면활성제를 사용하여 침전 포말부선법으로 제거하였다. 부선법으로 코발트이온을 제거하기 전에 35% $H_2O_2$를 모의폐액에 첨가하여 폐액의 전처리 과정을 도입하였다. 그 겨로가 최적 pH 및 처리후 잔존용액의 pH가 낮아졌고, 넓은 범위의 pH에서 높은 제거율을 나타내었다. 초기 코발트 이온농도, pH, 계면활성제 농도, 부선시간, 공급기체 유속, 외부이온 농도 등을 변수라하여 실험한 결과, 초기 코발트 이온농도 50ppm, pH 9.5, 공급기체 유속 $70m\ell$/min, 부선시간 30분 등의 조건에서 99.8%의 제거율을 나타내었다. 침전물과 계면활성제의 흡착은 zeta potential 뿐만 아니라 침전물의 용해도 및 pH에 따라 변화하는 화학종과의 친화력과도 관계가 되는 것으로 추측되었다. 외부이온으로서 ${NO}_{3}^{-}$, ${SO}_{4}^{2-}$, ${Na}^{+}$, ${Ca}^{2+}$를 첨가하여 그 영향을 관찰하였으며, $SO_4^{2-}$가 0.1M 함유된 cobalt 용액을 침전 포말부선법으로 처리한 결과 zeta potential의 감소 및 침전방해 등의 이유로 제거효율은 90%를 나타내었다.

  • PDF

Microstructural and Mechanical Characteristics of Wrought Mg-Sn-Zn Alloy

  • Kim, J.M.;Park, J.S.
    • 열처리공학회지
    • /
    • 제22권2호
    • /
    • pp.75-79
    • /
    • 2009
  • Precipitate formations and grain size variations in various Mg-Sn-Zn alloys have been investigated and their effects on the tensile properties and sheet metal formability were evaluated. MgSn and MgZn precipitates were observed in the alloy sheets, however any clear difference in morphology or size for the precipitates could not be found even though MgSn precipitates tend to be larger than MgZn. The highest formability in terms of conical cup value was found in the Mg-4 wt%Sn-2 wt%Zn where the high tensile elongation and the reduced grain coarsening at elevated temperatures were observed.

Incoloy 825 합금의 기계적 성질에 미치는 열처리의 영향 (Effect of Solution Heat Treatment on Mechanical Properties in Incoloy 825 Alloy)

  • 박영태;김도훈;강창룡
    • 열처리공학회지
    • /
    • 제30권3호
    • /
    • pp.99-105
    • /
    • 2017
  • This study was carried out to investigate the effect of heat treatment on the microstructure and mechanical properties in 90% hot forged Incoloy 825 alloy. With increasing solution treatment temperature, the grain size increased and the volume fraction of total precipitates decreased, and the precipitates disappeared at $1,000^{\circ}C$. With increasing aging time at $700^{\circ}C$, the volume fraction of precipitate increased and the precipitates size increased. Most of the precipitates consist $Cr_{23}C_6$ carbide, and a small amount of TiC carbide was also observed. With decreasing solution treatment temperature and increasing aging time, tensile strength and hardness increased, and the elongation and impact value decreased. With increasing aging time, the impact value decreased sharply by the increased of the precipitate size.

Co-sputtering에 의해 증착된 TiNi 박막의 미세조직 및 기계적성질에 미치는 어닐링 열처리 효과 (Effects of Annealing Treatments on Microstructure and Mechanical Property of co-sputtered TiNi Thin Film)

  • 박수대;백창현;홍주화
    • 열처리공학회지
    • /
    • 제21권1호
    • /
    • pp.26-32
    • /
    • 2008
  • Effects of annealing treatment on microstructure and mechanical property of co-sputtered TiNi thin films were studied. As-deposited films showed amorphous state. However, above annealing temperature of $500^{\circ}C$ martensite phase (B19'), precipitate phase ($Ti_2Ni$) and a small amount of parent phase ($B_2$) were present, and phase transformation behaviors were three multi-step phase transformations $B19^{\prime}{\rightarrow}B_2$ and $B_2{\rightarrow}R-phase$ and $R-phase{\rightarrow}B19^{\prime}$. Increase of martensite transformation temperature, increase of microhardness and Young's modulus of TiNi films annealed above $500^{\circ}C$ were discussed in terms of precipitate phase.

평판배지법에 의한 4-chlorobenzoate 탈염소화 세균의 검색 (Identification of 4-Chlorobenzoate Dechlorinating Bacteria by Simple Plate Assay)

  • 채종찬;김치경;민경희;박용근
    • 한국미생물·생명공학회지
    • /
    • 제23권1호
    • /
    • pp.104-109
    • /
    • 1995
  • The gene responsible for dechlorination of 4-chlorobenzoate (4CBA) was cloned in E. coli XL1-Blue from Pseudomonas sp. DJ-12. The cloned cell of E. coli Cjl had the hybrid pBluescript SK(+) plasmid, into which about 9.5 kb genomic DNA fragment of PseudOmonas sp. DJ-12 was inserted. The subclone of pCJlOl was constructed by inserting the 3.4 kb EcoRI-HindIII fragment of pCJl into the vector. Those cloned cells could be simply selected by halo formation around the colonies which was the precipitate of AgCl produced by reaction of AgNO$_{3}$ and chloride ion liberated by bacterial dechlorination of 4CBA- Such a plate assay method was standardized by the procedure that the colonies grown for 2 days on the Cl$^{-}$-free plate medium containing 1 mM 4CBA were flooded with 0.1 M AgNO$_{3}$ solution.

  • PDF