• 융복합기술연구소 논문집
• /
• 제10권1호
• /
• pp.19-24
• /
• 2020

The purpose of the study is to investigate the thermal durability characteristics of the Pt catalyst and additives used in a catalytic combustor. The catalyst used in the experiment was based on Pt (3 wt%), and a total of 12 types were prepared using a combination of additives (Ni, La, Ce, Fe, and Co). From the results, In the fresh state, the two types of combination catalysts with the highest C₃H₈ conversion were Pt_Ce (79.9%) at 500℃, and in the three types of combination catalysts, Pt_La_Ni (93.4%) at 500℃ had the best performance. Among aged catalysts at 850℃ and 8 hours, Pt-La-Ni and Pt-Ni-Ce catalysts showed the highest C₃H₈ conversion of about 71% at 500℃.

• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.667-674
• /
• 2007

Various types of NOx storage catalysts for NGV's were designed, manufactured, and tested in this work on a model gas test bench. As in most of other studies on NOx storage catalyst, alkaline earth metal barium(Ba) was used as the NOx adsorbing substance. The barium-based experimental catalysts were designed to contain different amounts of Ba and precious metals at various ratios. Reaction tests were performed to investigate the NOx storage capacity and the NOx conversion efficiency of the experimental catalysts. From the results, it was found that when Ba loading of a catalyst was increased, the quantity of NOx stored in the catalyst increased in the high temperature range over 350. With more Ba deposition, the NOx conversion efficiency as well as its peak value increased in the high temperature range, but decreased in the low temperature range. The best of de-NOx catalyst tested in this study was catalyst B, which was loaded with 42.8 g/L of Ba in addition to Pt, Pd and Rh in the ratio of 7:7:1. In the low temperature range under $450^{\circ}C$, the NOx conversion efficiencies of the catalysts were lower when $CH_4$, instead of either $C_3H_6$ or $C_3H_8$, was used as the reductant.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.472-477
• /
• 2001

Spent catalysts containing platinum were generated in petroleum refinery and other chemical industries. The reclamation of precious metals from such wastes has long been attempted in view of their rare, expensive and indispensable nature. In this study, the recovery of platinum from petroleum catalysts was attempted by a method consisting mainly of dissolving alumina substrate with sulfuric acid thereby concentrating insoluble platinum. Also, platinum dissolved partially in sulfuric acid was recovered by a cementation method using aluminum metal as a reductive agent. The effect of temperature, time, concentration of sulfuric acid. and pulp density on the dissolution of substrate was investigated. When the substrate of platinum catalyst was ${\gamma}$-AI$_2$O$_3$ about 95% alumina was dissolved in 6.0M sulfuric acid at 10$0^{\circ}C$ for 2 hours. When the substrate was the mixture of ${\gamma}$-A1$_2$O$_3$and $\alpha$-A1$_2$O$_3$about 92% was dissolved after 4 hours. As a result, more than 99% of platinum could be recovered by this method and aluminum sulfate was obtained as byproduct.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.123-130
• /
• 2005

In this study, we evaluated the CH4 and CO conversion efficiencies over the oxidation catalysts for natural gas vehicle with lean-burn system. On the fresh catalyst, the conversion efficiency was increased when the loading of precious metal was increased. On the aged catalyst, the conversion efficiency was decreased as increasing the excess air ratio. We could confirm the measuring conversion efficiency of the unsteady state with the FTIR and that of steady state with the GC The temperature increasing ratio of unsteady state is acceptable from 3$^{\circ}C$/min. to 15$^{\circ}C$/min. for the evaluation of catalyst conversion performance , which has within the 4$\%$ of the difference of conversion efficiency. We observed a physical behavior of the thermal aged catalyst's surface using TEM and BET device. It was found that the precious metal was grown to the micro-scopic size by thermal aging process.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.20-26
• /
• 2006

본 연구는 Fuel-NOx 제어를 위한 암모니아 중 질소성분의 전환반응에 대한 실험 결과이다. 특히 열분해가스 촉매연소에서 NOx 생성을 줄이기 위한 제어 조건을 제시하였으며, Fuel-NOx 반응 메카니즘 연구의 기초자료를 제시하였다.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.8-16
• /
• 2006

The research was conducted to characterize of Rh-Pd-Pt TWC with a double-layer washcoat for gasoline vehicle. The physical characteristics on surface of catalyst were inspected by BET, SEM and TEM. The characteristics of catalytic reaction were examined by the TPD/TPR and CO-pulse chemisorption. The catalyst $6Hx(0.35\times11\times3)$ showed superior conversion performance after hydrothermal aging process, which was due to small difference of the surface area between. the fresh and the aged catalyst. The CO-chemisorption and surface area were superior in the 600 cpsi catalyst than other catalysts, this catalyst also shown the higher conversion efficiency of the exhaust emissions. From the TPR test, the conversion performance of the aged catalyst was decreased by the agglomeration and sintering of the PM and metal oxides. From the TPD result, it was found that the NO chemisorption was happed on the bottom-layer washcoat with Pd, and the NO chemisorption was re-happened on the upper-layer washcoat with Pt and Rh in the desorption process.

• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.3261-3266
• /
• 2012

수소발생 및 저장 물질로서 붕수소화나트륨($NaBH_4$)은 촉매 분해반응을 통하여 수소를 생성할 수 있는데, 이 프로타이드 화합물을 이용하여 가정용 또는 이동용 연료전지의 수소를 공급할 수 있어서, 이 화합물과 분해반응에 대한 연구가 많이 수행되고 있다. 본 연구에서는 알칼리성 $NaBH_4$ 수용액을 귀금속이 담지된 금속산화물 촉매를 이용하여 가수분해반응을 일으키고, 그 분해반응 산물인 수소의 발생량을 측정하였다. 지지체로 사용한 금속산화물의 종류를 비교하고, 함침된 귀금속으로서 백금과 루테늄을 비교하였으며, 촉매사용량, $NaBH_4$ 용액의 농도 등의 영향을 고찰하고, 수소 발생 패턴을 조사하였다.

• 전기화학회지
• /
• 제13권4호
• /
• pp.240-245
• /
• 2010

This work explored the catalytic effect of Pt in multi-wall carbon nanotube and poly-pyrrole conductive polymer electrocatalysts (Pt/PPy/MWCNT). A home-made Pt/PPy/MWCNT catalyst was first evaluated by comparing its electrochemical active surface area (ESA) with E-Tek commercial catalysts by cyclic voltammetry in $H_2SO_4$ solution. Then, the methanol oxidation currents of Pt/PPy/MWCNT and the hydrogen peaks in $H_2SO_4$ solution were serially measured with microporous electrode. This provided the current density of methanol oxidation based on the ESA, allowing a quantitative comparison of catalytic activity. The current densities were also measured for Pt/C catalysts of E-Tek and Tanaka Precious Metal Co. The current densities for the different catalysts were similar, implying that catalytic activity depended directly on the ESA rather than charge transfer or electronic conductivity.

• 자원리싸이클링
• /
• 제3권1호
• /
• pp.17-24
• /
• 1994

석유화학산업에서 발생된 폐촉매에는 귀금속계 금속이나 회유금속들이 잔조해 있는데, 이들 유가금속을 회수하는 것은 환경보존과 자원재활용 측면에서 매우 중요하다. 본 연구에서는 백금계 폐촉매로부터 귀금속을 회수하는 연구를 수행하였다. 폐촉매 시료로는 Naphtha로부터 에틸렌을 제조시에 사용했던 알루미나담체 0.3% Pd 폐촉매와, 원유 정제 후 벤젠, 톨루엔, 크실렌 등을 제조시에 사용한 알루미나담체 0.3% Pt/Re 폐촉매를 사용하였다. 시료들은 배소과정을 거쳐서 탄수와 황 등 원유로부터 유입된 가연성 물질들을 제거하고, 분쇄한 다음 6N 염산 및 왕수로 침출하였다. Pd는 Fe분말을 사용한 석출법에 의하여 침출액 중에서 금속 Pd로 회수하였다. Pt/Re 폐촉매 경우에는 염산 및 왕수로 침출 후 Fe 분말을 사용하여 Pt를 먼저 회수한 다음, 여액에 황화나트륨을 첨가하여 Re 황화물로 침전시켜서 Re을 회수하였다. 본 연구에서는 폐촉매 침출시 6N 염산을 침출액으로 사용하여 왕수를 사용한 것과 비슷한 정도의 침출효과를 얻을 수 있었는데, 이것은 침출시 소요비용을 줄이고 폐산처리시에 왕수보다 쉽게 처리할 수 있다는 점에서 공점상 효과적이다.

• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.591-598
• /
• 2005

A three-way catalyst system of a natural gas vehicle (NGV) has characteristics of higher fuel consumption and higher thermal load than a lean-bum catalyst system. To meet stringent emission standards in the future, NGV with the lean-bum engine may need a catalyst system to reduce the amounts of HC, CO and NOx emission, although natural gas system has low emission characteristics. We conducted experiments to evaluate the conversion efficiency of the NOx reduction catalyst for the lean-burn natural gas engine. The NOx reduction catalysts were prepared with the ${\gamma}-Al_{2}O_3$ washcoat including Ba based on Pt, Pd and Rh precious metal. In the experiments, effective parameters were space velocity, spike duration of the rich condition, and the temperature of flowing model gas. From the results of the experiments, we found that the temperature for maximum NOx reduction was around $450^{\circ}C$, and the space velocity for optimum NOx reduction was around $30,000\;h^{-1}$ And we developed an evaluation model of the NOx reduction catalyst to evaluate the conversion performance of each other catalysts.