• 만화애니메이션 연구
• /
• 통권51호
• /
• pp.293-319
• /
• 2018

최근의 영화, 애니메이션, 드라마같은 영상 콘텐츠들은 기술과 장비의 발전에 힘입어 표현할 수 있는 영화적 상상의 영역을 빠른 속도로 넓혀가고 있다. 높아진 관객의 시각적 기대를 충족시키고 흥미진진한 스토리텔링과 환상적 세계를 구현하기 위해 서로 다른 기법간의 융합도 활발히 사용되어 지고 시각효과 및 영상 합성에 대한 리얼리티도 더욱 증대되고 있는 중이다. 그에 따라 최근의 컴퓨터그래픽스를 사용한 VFX중심의 영화들은 과거보다 더욱 복잡한 제작 프로세스를 가진다. 때문에 정교한 설계를 위해 기획 과정에서 '프리비즈'로 불리는 프리-비주얼라이제이션(Pre-visualization)의 중요성이 더욱 크게 대두되고 있다. 프리비즈는 영화나 애니메이션의 본 제작에 들어가기 전 기획단계에서 스토리나 연출아이디어에 대한 사전 시각화작업을 뜻한다. 오늘날 프리비즈는 컴퓨터그래픽스를 사용하여 3D애니메이션의 유형으로 구현이 되며 이러한 프리비즈를 3D animatied Pre-visualization이라고 한다. 추상적이고 모호한 감독의 생각들을 미리 3차원 환경에서 구체적으로 구현해 볼 수 있는 3D animatied Pre-visualization은 비주얼 스토리텔링의 막강한 수단으로써 현재 컴퓨터 그래픽을 광범위하게 사용하는 VFX 영화산업을 중심으로 활발히 사용되고 있고 프로덕션의 전반에 걸친 프리비즈의 역할도 과거에 비해 증대되었다. 그러나 그에 따른 프리비즈의 역할과 효용성에 관한 연구는 많지 않은 상태다. 이에 본 연구는 연구자가 제작에 참여한 3D animatied Pre-visualization의 제작사례를 중심으로 현재 VFX 영화 제작 시 활용되고 있는 프리비즈의 역할에 관해 연구를 진행하였다. 오늘날 세분화된 프리비즈의 역할을 스토리-비즈, 테크-비즈, 컨셉-비즈, 피칭-비즈, 포스트-비즈, 3D애니메틱스로 분류하고 각각의 역할에 관해 사례이미지와 함께 분석하였다. 이러한 역할에 관한 연구를 통해 프리비즈가 갖추어야하는 특성을 명확히 하였고 프로덕션에서 프리비즈의 활용이 불러오는 이점과 효용성에 관한 개념을 강화하였다. 본 연구는 국내 VFX영화 제작과정에서 프리비즈의 다양한 역할과 그에 따른 효용성에 대해 공감하여 프로덕션 전반에 걸친 활발한 사용을 유도하는 것에 의의가 있다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 동계 학술대회 논문집
• /
• pp.451-456
• /
• 2000

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3313-3318
• /
• 2014

The reaction mechanism of Lead ions catalyzing complexation reactions between TIPP and metal ions was investigated by researching the kinetics of the formation of metalloporphyrins by UV/Vis-spectra, and verified by exploring the formation of metalloporphyrins catalyzed by acetic acid. Kinetics studies suggested that the fluctuations of reaction rate indicated the formation of metalloporphyrin was step-wise, including the pre-equilibrium step (the coordination of the pyrrolenine nitrogens to $Mn^+$) and the rate-controlling step (the deprotonation of the pyrrole proton). In the pre-equalization step, a sitting-atop (SAT) structure formed first with the complexation between larger radius of $Pb^{2+}$ and TIPP, changed the activation, then $Pb^{2+}$ left with the smaller radius of metal ions attacking from the back of the porphyrin ring center. In the rate-controlling step, two pyrrole protons dissociated to restore a stable structure. This was verified by adding acetic acid at different reaction times.

• 한국인구학
• /
• 제12권2호
• /
• pp.56-68
• /
• 1989

The methodology in historical demography comprises the three core areas the family reconstitution method at the Institut National d' Ftudes Demographiques(I.N.E.D), the back projection at the Cambridge Group for the History of PopuJation and Social Struc-ture(HPSS). and the household-pattern analysis at the Cambridge Group and at the California Institute of Technology. The paper presents an outline of the family reconstitu-tion method and discusses the problems, both theoretical and methodological, arising from the problematic back projection vis-a-vis the usual inverse projection developed by Ronald D. Lee at Berkeley. Recent developments in the tield of the generalized inverse projection method designed 10 supplement the defects in the back projection and the inverse projection are presented. and for ease of explanation of the parish register data for the family reconstitution form (FRE). pre-modern Korean household register data are presented along with the parish register data of England and Wales that constitute the backbone of historical demography in pre-modern Europe. Possibilities of exploring the household pattern analysis method based on the Laslett-Hammel classification scheme for the mid-eighteenth-century Korean household register data are suggested.

• 한국염색가공학회지
• /
• 제12권5호
• /
• pp.288-294
• /
• 2000

The dyeing of Tencel fabric with Coptis chinensis Franch was studied. The colorant was extracted with distilled water under various concentrations of dyestuff, times, mordants. UV-VIS spectra were obtained to find the maximum wavelength and absorbance of colorant. Tencel fabric was dyed with different mordants in pre and post-mordanting methods. Maximum wavelength of spectrum was 343 nm, and K/S value of pre-mordant was higher than post-mordant. Aluminium and stannic mordants changed color from yellow to blue-greenish and red-bluish. Colorfastnesses of light, and washing were low grade, but that of perspiration was increased.

• Journal of Biosystems Engineering
• /
• 제36권2호
• /
• pp.130-139
• /
• 2011

Three modes of VIS/NIR spectroscopic measurement (interactance and two modes of transmission) were compared for their ability to estimate soluble solids content (SSC) of 'Shingo' pear non-destructively. The two transmission modes are named as full- and semi-transmission, where full-transmission stands for passing of light through abdomen of pear and semi-transmission is for transit of light mainly through flesh of pear. For comparison of the modes, prediction models developed from the collected spectroscopic data by the three modes were developed and tested for comparison of their performance. Partial least square regression (PSLR) was used to develop the models and various pre-processing methods were applied to develop models of high accuracy. The experiment was repeated three times with pears produced in different regions. The experiments resulted that selection of pre-processing is very important to attain accurate models, and multiplicative scatter correction (MSC) was selected as a pre-processor of high accuracy for the three modes of spectroscopic measurement in every experiment. Except for MSC, different group of pre-processing methods were selected for the three modes of measurement in every experiment without any tendency to the tested modes of measurement and pears of different produced region. Root-mean-square error of prediction (RMSEP) of prediction models of the three modes of measurement using prepreocessor of MSC were compared for their ability to estimate SSC. The models resulted in ranges of $0.37{\sim}0.57^{\circ}Brix$, $0.65{\sim}0.72^{\circ}Brix$, $0.39{\sim}0.51^{\circ}Brix$ for interactance, full- and semi-transmission, respectively. As shown, modes of semi-transmission and interactance resulted about the same level of prediction accuracy and were noted as modes of high performance to predict SSC.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.779-783
• /
• 2008

The main colorant of Morus alba L. fruit is anthocyanin which is a kind of flavonoid group. In this article, the dyeing properties of colorant extracted from Morus alba L. fruit were investigated on some silk fabrics. The results were as follows: The maximum absorbance of Morus alba L. fruit showed at 284 nm, and 516 nm by UV-VIS spectrophotometer. The dye adsorption increased according as dye concentration. The optimal dyeing temperature was $60^{\circ}C$ and the dye equilibrium was reached 40 minutes after dyeing. The highest K/S value of the colorant obtained at bath ratio 40:1. The effect of pH of dye solution showed higher K/S value at acidic than alkaline condition. Almost Mordants except pre-Fe and Sn did not significantly increased dye adsorption. The pre mordanted silk fabrics showed RP, P, and post mordanted ones showed PB, GY. The color fastnesses to light, washing, and perspiration were modified at pre-Sn mordanted samples.

• 복식
• /
• 제56권6호
• /
• pp.145-152
• /
• 2006

Dyeing properties of sargent cherry of Prunus sargentii Rehder were investigated with silk fabrics. The absorbed wave lengths at UV-VIS spectrometer were 362nm, 386nm, 430nm, and 512nm. The K/S value showed high in following conditions: 100%(w/w) stock solution, 60 minutes of dyeing time, 80$^{\circ}C$ of dyeing temperature, and 5 times of dyeing repetition. The K/S value showed higher in post-mordant than in pre-mordant, and the change of color did not appear in pre-mordant samples. They were colored greenish yellow in post-mordanted Cu and Fe. The highest dyeability and $\Delta$E showed in post-mordanted Fe. The light fastness showed 3-4 in post-mordanted Fe, 1-2 in pre-mordanted Al, and washing and perspiration fastnesses showed also good results in post-mordanted Fe.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.60-67
• /
• 2011

Hemicelluloses pre-extracted from Korean mixed wood chip were investigated as a wet-end additive. Hemicelluloses dissolved in hot water and alkali solution were isolated by ethyl alcohol precipitation from pre-extractives. They showed molecular weight of 9,000 ~ 27,000 g/mol as revealed by size exclusion chromatography. The reduction of molecular weight through hot water extraction was caused by autohydrolysis. Chemical composition of the hemicelluloses were analyzed with high-performance liquid chromatography and UV-Vis spectroscopy. As the surface charge of isolated hemicelluloses were negative, the adsorption of hemicelluloses onto softwood unbleached kraft pulp fiber was promoted by poly-DADMAC. The physical properties of handsheets increased as the molecular weight of hemicellulose increased. On the other hands, the optical property decreased with hemicellulose adsorption.

• 한국염색가공학회지
• /
• 제15권5호
• /
• pp.310-315
• /
• 2003

The dyeing of cotton fabric with Forsythia koreana NAKAI was investigated. The colorant was extracted with methanol under various concentrations of dyestuffs at $40^\circ{C}$ and $76^\circ{C}$. UV-VIS spectrum was obtained to find the maximum wavelength of colorant. Cotton fabrics were dyed at different temperatures, mordants, in pre and post mordanting methods. The maximum wavelength of spectrum were 390nm, 410nm, 440nm. The highest K/S value was showed at 100% dye concentration, extracted at $76^\circ{C}$ and dyed at $80^\circ{C}$. The mordant effect was not good in the K/S values. The light fastness was increased at Fe-pre mordant and Cr, Fe-post mordant.