• 제목/요약/키워드: Pre-treatment process

검색결과 676건 처리시간 0.028초

분말활성탄(PAC)+막여과(MF) 조합공정에서 PAC의 영향 평가 (Assesment of Powdered Activated Carbon Effect on PAC+MF Hybrid Membrane Process)

  • 김병수;왕창근;임재림;김충환
    • 상하수도학회지
    • /
    • 제22권5호
    • /
    • pp.517-522
    • /
    • 2008
  • This study aims at an assessment of the effectiveness of taste & odor removal and transmembrane pressure changes in a pilot membrane plant(500m3/day) by adding PAC to MF process, and at providing a basis for applying it to the advanced water treatment process. The transmembrane pressure showed, in low turbidity of raw water, a tendency to decrease when PAC was injected at the Flux of 1, $1.5m^3/m^2{\cdot}d$, while it increased in high Flux($1.5m^3/m^2{\cdot}d$) in high turbidity of raw water. in addtion, it is shown that the fouling could be reduced more when PAC is injected together with appropriate amount of coagulant, than when PAC is solely injected. Taste & Odor-causing 2-MIB may not be detected in membrane filtered water, if the amount of PAC injection is increased in accordance with the increasing concentration of 2-MIB. Hence, PAC injection, as a pre-treatment process in MF membrane filtering, is supposed to be a suitable process for reducing fouling as well as for improvement effectiveness of taste & odor treatment.

Membrane Technology for Waste Water Recovery

  • Okazaki, Minoru
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1996년도 추계 총회 및 학술발표회
    • /
    • pp.22-33
    • /
    • 1996
  • With the experience of the 1994 drought, and the shortage of water resources in Japan, it has been re-informed upon us ensure and maintain the stability of water resources. Accordingly, with each plant, a serious appraisal has begun looking at the re-use of waste water. Membrane technology is an important process for waste water recovery. Effluent kom waste water facilities changes the quality of water significantly. The conventional pre-treatment of RO is hard to supply good quality feed water to RO in the waste water recovery system. The microfiltration system as a pre-treatment of RO in the paper overcomes the fouling with the air backwash and is operated in direct flow mode at a low pressure producing a high flux. The paper will focus the waste water recovery using membrane technology and many examples will be given.

  • PDF

RFID 안테나용 전도성 프린팅을 위한 PET 직물의 최적 전처리 공정연구 및 성능평가 (A Study on Pre-treatment and Performance Evaluation for Printing RFID Antenna with Conductive Paste)

  • 홍진표;정찬도;윤석한;최상현
    • 한국염색가공학회지
    • /
    • 제25권4호
    • /
    • pp.287-291
    • /
    • 2013
  • Nowadays, terms such as 'Smart Textile', 'Intelligent Textile' and 'Wearable Computing' are commonly used in everyday contexts. And radio-frequency identification (RFID) is the use of a wireless non-contact system that uses radio-frequency electromagnetic fields to transfer data from a tag attached to an object, for the purposes of automatic identification and tracking. These products are required technologies which are textile treatments, printing, ink, etc. Durability of textile substrates is an essential marker for conductive ink printing process. Especially, heat stability is important, since conductive ink should be processable (annealing, curing) at temperatures below $150^{\circ}C$. This study was application of RFID on textiles. The textile pre-treatment processes should be carried out to use RFID antenna on textiles.

Effect of Surface Treatment on the Formation of NiO Nanomaterials by Thermal Oxidation

  • Hien, Vu Xuan;Heo, Young-Woo
    • Applied Science and Convergence Technology
    • /
    • 제25권6호
    • /
    • pp.149-153
    • /
    • 2016
  • Thermal oxidation has significant potential for use in synthesizing metal-oxide nanostructures from metallic materials. However, this method has limited applicability to the synthesis of multi-morphology NiO from Ni foil. Techniques consisting of mechanical and chemical approaches were used to pre-treat the Ni foil (prior to oxidation) to promote the formation of nanowires and nanoplates on the NiO layer. These morphologies were realized on the Ni foils scratched by sand paper and a knife, respectively, and subsequently heat-treated at $500^{\circ}C$ for 24 h. Small nanowires (diameter: <10 nm) formed on the Ni foil treated by absolute $HNO_3$ and then oxidized at $500^{\circ}C$ for 24 h. The formation of various morphologies (on the pre-treated Ni foil), which differ from that formed in the case of pristine Ni foil after oxidation, may be attributed to the surface melting phenomenon that occurs during the nucleation process.

Sequential microbial-photocatalytic degradation of imidacloprid

  • Sharma, Teena;Kaur, Manpreet;Sobti, Amit;Rajor, Anita;Toor, Amrit Pal
    • Environmental Engineering Research
    • /
    • 제25권4호
    • /
    • pp.597-604
    • /
    • 2020
  • In the present study, the application of sequential biological and photocatalytic process was evaluated as a feasible process for the degradation of imidacloprid (IMI) in soil. Photocatalysis was carried out as a post and pre-treatment to the biological process as Microbial Photocatalytic (MP) and Photocatalytic Microbial (PM), respectively, to enhance the degradation and mineralization of IMI in soil. By both the processes, there was an enhancement in the percentage degradation of IMI i.e 86.2% for PM and 94.6% for MP process. The obtained results indicate that MP process is apparently more efficient in degradation of IMI which was observed with 15 days of biological treatment followed by 18 h of photocatalytic degradation (15 d + 18 h). The present work also reveals that though the difference in terms of the degradation of IMI after 5 d + 18 h, 10 d + 18 h & 15 d+ 18 h of MP process is not drastic, yet significant variation has been observed in terms of mineralization that truly signifies the removal of IMI from the soil. The LC analysis has shown that the intermediates formed during MP process are more and smaller in comparison to PM process, which further provides evidence that MP process is better than PM process for effective degradation of IMI in soil.

PVDF 가압식과 PE 침지식 분리막을 결합한 2단 막여과 공정의 성능검토 및 회수율 증대 방안 연구 (Increase of Recovery Ratio by Two Stage Membrane Process (the Pressurized PVDF Membrane Followed by Submerged PE Membrane))

  • 김준현;문백수;장홍진;김진호;김병석
    • 멤브레인
    • /
    • 제23권1호
    • /
    • pp.45-53
    • /
    • 2013
  • 현재 분리막 여과 공정은 정수처리에서 많은 관심을 받고 있다. 하지만, 분리막의 효율적인 운영을 위하여 '혼화/응집(/침전)' 등의 전처리 시설 설치로 인한 부지면적 및 비용증가와 5~10%의 배출수 문제가 추가적으로 발생한다. 그래서 본 연구에서는 전처리 공정 없이 지표수(한강)에 대하여 가압식 PVDF 분리막[(주)에코니티]으로 운전하여 성능을 검토하였으며 그 결과 1년 동안 화학적 세정 없이 여과 flux가 1~2.4 m/d (at $25^{\circ}C$)로 운전되었고, 유입원수의 탁도와 상관없이 분리막 처리수의 탁도는 0.05 NTU 이하로 안정되게 유지되었다. 또한, 회수율 제고를 위하여 1개월 동안 가압식 배출수(역세수 + 배수)를 침지식 PE 분리막[(주)에코니티]으로 연계하여 2단 막여과 운영을 한 결과 전체 공정 회수율을 99.5%까지 증가시킬 수 있었다.

유기물부하가 낮은 하수의 전달탈질공법에 의한 탈질방안 (The Study on denitrification of low organic loading sewage by pre-denitrification process)

  • 이철승;서종환;김진우
    • 한국환경과학회지
    • /
    • 제13권9호
    • /
    • pp.779-878
    • /
    • 2004
  • This study was conducted to analyze the operating conditions of predenitrification process to improve the treatment efficiency in low organic loading sewage plant in use today, and to investigate the treatment efficiency of pilot plant added night soil as well as the nitrogen removal characteristics of pilot plant added carbon sources. In the operation under the condition of $BOD_{5}$ sludge load 0.03-0.28kg $BOD_{5}$/kg VSS/d and oxic ammoniac nitrogen sludge load 0.02-0.24 $kgNH_{4}^{+}$-N/kg MLVSS/d, nitrification efficiency is higher than 95%. In order to achieve 70% nitrogen removal at the T-N sludge loading 0.06kg T-N/kg VSSㆍd and the SRT 6~11 days, optimum operating factors were revealed to $CODc_{r}$/T-N ratio 9, recycle ratio 2.6, and denitrification volume ratio 0.33. At this time, denitrification capacity was approximately 0.09 kg $NO_{3}^{-}$-N/kg $CODc_{r}$; specific nitrification rate was 3.4mg $NH_{4}^{+}$-N/g MLVSS/hr; and specific denitrification rate was 4.8mg $NO_{3}^{-}$-N/g MLVSS/hr.

사전 열처리 공정 처리한 야채류 복합추출물의 항산화활성 평가 (Antioxidant Activity Evaluation of Vegetable Complex Extract of Pre-Heat Treatment Process)

  • 김현경;황혜영;김흥태;김혜진;서수진
    • 문화기술의 융합
    • /
    • 제8권2호
    • /
    • pp.409-416
    • /
    • 2022
  • 식재료로서 안전성이 확립되고 항산화성이 입증되어 있으며, 유익한 생리활성을 나타내는 성분을 동시에 섭취할 수 있는 과일 및 야채의 복합 추출물을 항산화 활성이 더욱 증가하도록 가공한 항산화성 복합 추출물의 항산화 활성을 평가하였다. 실험 결과에 의하면 항산화성 복합 추출물은, 사전 열처리 과정을 추가하는 것에 의해 DPPH 라디컬 소거능으로 측정되는 항산화능이 41% 증가하여 항산화성이 현저하므로, 항산화능을 이용한 약학 조성물, 화장료 조성물 또는 식품 조성물에 유용하게 사용될 수 있다는 결과를 얻었다.

상륙이 생쥐에 이식된 L1210 세포의 증식에 미치는 영향 (Effect of Phytolaccae Radix on the Proliferation of Transplanted-L1210 cells in Mice)

  • 한미숙;오찬호;은재순
    • 동의생리병리학회지
    • /
    • 제16권2호
    • /
    • pp.311-315
    • /
    • 2002
  • Cellular death by apoptosis is an active process, depending on gene transcription and protein synthesis. It was reported that nitric oxide can induce apoptosis in several cancer cell-lines. We studied effects of Phytolacca esculentum van Houtt (Phytolaccaceae) Radix water extract (PRE) on the proliferation of transplanted-L1210 cells in mice. When PRE (500 mg/kg) was administered orally once a day for 7 days after transplantation of L1210 cells to mice, DNA fragmentation of transplanted-L1210 cells was induced and mitochondrial transmembrane potential of those cells was reduced. Additionally, DNA fragmentation of L1210 cells was induced by the treatment of PRE in vitro. Also, DNA fragmentation of L1210 cells was enhanced by co-culture with the peritoneal macrophages obtained from PRE-administered mice and was partly inhibited by L-NMMA in vitro. PRE enhanced the production of nitric oxide and tumor necrosis factor-α from peritoneal rnacrophages. These results suggest that PRE induces apoptosis of transplanted-L1210 cells via directive action on L1210 cells and stimulation of nitric oxide and tumor neaosis factor-α from macrophages.