• 펄프종이기술
• /
• 제45권3호
• /
• pp.27-35
• /
• 2013

Cotton linter pre-treatment methods using electron beam and sulfuric acid were investigated to prepare high quality regenerated fibers for fabrics. So far, NaOH was used to reduce the degree of polymerization (DP) of the cotton linter for ease of dissolving by cellulose solvent. Two pre-treatment methods were developed to reduce the consumption of the chemicals (NaOH) and to control the DP of cellulose more precisely. Changes in ${\alpha}$-cellulose contents and brightness by the pre-treatments were also important concerns. Both electron beam irradiation and sulfuric acid were shown to be effective on controlling the DP of cellulose and to reduce the chemical consumption, but reduced ${\alpha}$-cellulose contents as well in this study. Sulfuric acid pre-treatment, which needed additional washing process after the pre-treatment when comparing to the electron beam irradiation method, gave the highest brightness and the highest reduction of ${\alpha}$-cellulose content.

• 접착 및 계면
• /
• 제14권3호
• /
• pp.146-159
• /
• 2013

본 연구에서는 $350^{\circ}C$에서 4 min 이내로 빠르게 등온 안정화공정을 통해 얻어진 레이온직물의 화학조성, 물리적 특성, X-선 회절 패턴, 열안정성 그리고 직물 형상에 미치는 초음파세척 및 화학전처리의 영향을 조사하였다. 안정화공정 동안 레이온직물에서 발생하는 중량감소와 열수축을 줄이고 안정화반응을 촉진시키기 위하여 안정화공정 전에 레이온직물을 먼저 초음파 세척하고 $NH_4Cl$, $Na_3PO_4$, $H_3PO_4$ 및 $ZnCl_2$로 화학전처리 공정을 수행하였다. 결과는 초음파세척 및 화학전처리가 안정화된 레이온직물의 중량감소, 열수축, 미세구조 변화, 탄소함량, 열안정성, 및 직물 형상에 영향을 주었으며, 사용한 안정화시간과 화학전처리제의 종류에 의존하였다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.14-17
• /
• 1999

Four designed $Nb_{3}$Sn superconductors have been fabricated in order to investigate the effect of pre-heat treatment for internal tin process. 3 types of sub-elements and 2 types of Sn reservers were fabricated. Diffusion of Sn is better in the strand divided Sn equally than in the strand had one large Sn reserver during pre heat-treatment.

• 접착 및 계면
• /
• 제19권1호
• /
• pp.5-12
• /
• 2018

본 연구는 선처리제 공정을 생략하고 우수한 접착 특성을 가지는 합성피혁용 스킨(skin) 수지제조에 관한 것으로 이성분계 혼합 폴리우레탄 수분산체를 제조하여 이에 대한 선처리제(primer)를 생략한 접착 시편의 접착특성을 평가하는 것이다. 이성분계 혼합 폴리우레탄 수분산체의 제조는 에스터(ester)계 폴리우레탄 수지(PU-T)와 카보네이트(carbonate)계 폴리우레탄 수지(PU-C)를 각각 합성하고 이를 배합함으로써 최종 수지를 얻었다. 선처리제를 생략한 접착시편의 접착강도 측정결과, 우수한 상태접착강도 (Ethylene vinyl acetate(중창): $4.2kg_f/cm$, 고무(겉창) : $4.4kg_f/cm$)를 가짐을 확인할 수 있었다. 이는 신발 제조 공정에서 필수불가결하게 사용되었던 선처리제(primer) 공정을 생략가능하게 함으로써 공정의 단축과 선처리제(primer)에서 발생되는 휘발성유기화합물 (VOCs)의 감소를 가져와 친환경적인 장점을 지닌다.

• 한국물환경학회지
• /
• 제18권4호
• /
• pp.355-363
• /
• 2002

A demonstration plant was carried out to investigate the removal efficiency of $NH_3-N$ and $KMnO_4$ consumption depending on the existence of pre-chlorination for the ozonation and activated carbon process in the S water treatment plant which is located at the middle of Keum River. The averge removal efficiency of $KMnO_4$ consumption for $O_3/GAC$ processes with pre-chlorination and $O_3/BAC$ processes without pre-chlorination were 48.6% and 50% respectively. It is similar to removal effect of $KMnO_4$ consumption for GAC and BAC process depending on the existence of pre-chlorination. Otherwise, the removal of THMFP for GAC and BAC process was 58% and 68% respectively. $NH_3-N$ was not almost removed by sand filter and ozonation, but the average removal efficiency in the BAC process was about 31%. Especially, $NH_3-N$ was not almost removed by $O_3/BAC$ processes at the low temperature (below $$10^{\circ}C$$) in the winter season, $O_3/BAC$ processes have the advantage of removal of organic substance when it is compared to pre -chlorination followed by $O_3/GAC$ processes. Pre-chlorination followed by $O_3/GAC$ processes were required to remove $NH_3-N$ in the winter season because the removal of $NH_3-N$ was almost ineffective by $O_3/BAC$ process.

• 한국물환경학회지
• /
• 제38권6호
• /
• pp.267-274
• /
• 2022

This paper is a result of research conducted on the 800,000 m³/d capacity of A Water Treatment Plant (WTP) and 400,000 m³/d capacity of B WTP plant in operation in the Nakdong River region. We evaluated the effect of algae broom on the WTP operation based on the running data of both WTP and the data on the pre-oxidation process field test for algae control using sodium permanganate (SPM) at the B WTP. The study results showed that during the algal bloom period, the coagulant dose increased by 102% in A WTP and 58% in B WTP, respectively, and the chlorine dose also increased by 38% and 29%, respectively, which may affect Total trihalomethane (THM) production. Data such as algal populations and Chl-a, residual chlorine and THM, algal populations, and ozone dose appeared also highly correlated, confirming that algal broom affects WTP operations, including water quality and chemical dosage. As a result of the field test of B WTP, THMs appeared lower than that of the control, suggesting the possibility of the SPM pre-oxidation process as an alternative to algae-related water quality management. Furthermore, in terms of GHG emissions due to energy consumption, it was observed that the pre-oxidation process using SPM was approximately 10.8%, which is a very low ratio compared to the pre-ozonation process. Therefore, these results suggest that the SPM pre-oxidation process can be recommended as an alternative to low-carbon water purification technology.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.61-65
• /
• 1999

Because of the need for packages which accommodate high pin count, high density and high speed device, PBGA(plastic ball grid array) package gets more spotlight. But the substrate material which is used for PBGA package is in nature susceptible to moisture penetration. The objective of the study is to find out the path of delamination in the stacked structure of substrate. To increase the adhesion between the cooper laminate and PSR(photo solder resist) which is the weakest part, experiments were performed by changing parameters of printing pre-treatment and post-treatment process. As a result of experiments, the factor effects on the adhesion between the cooper laminate and PSR is caused by all of the pre-treatment and post-treatment condition. A considerable change was observed depending on the amount of UV irradiation after thermal cure which is typical of printing post-treatment condition rather than pre-treatment condition.

• 대한환경공학회지
• /
• 제38권6호
• /
• pp.291-298
• /
• 2016

불용성 전극은 전기화학 공정에 있어 가장 핵심적인 소재이며, 이를 이용한 전기화학적 수처리 공정은 난분해성 물질을 제거하는 유용한 방법으로서 이에 대한 연구가 지속적으로 이루어져 오고 있다. 전기화학적 수처리 공정은 주로 산화전극에서의 산화반응과 환원전극에서의 환원반응을 이용하는 것이다. 본 연구에서는 불용성 전극의 제조공정에서 전처리 방법이 전극의 수명에 미치는 영향을 평가하였다. 실험결과 촉매전극층을 코팅하는 물질계 및 코팅방법을 동일하게 하는 경우에도 기판의 전처리 방법 즉, 기판표면의 조도, 세정방법, 중간층 형성 여부 및 방법 등에 따라 전극의 수명이 크게 달라지는 것을 확인하였다. 실험은 가장 많이 사용되는 전극의 하나인 $IrO_2/Ti$ 전극을 대상으로 하였다. 샌드 블라스팅 공정의 경우 입도를 달리하는 샌딩 미디어를 이용하여 전극을 제조하고 이에 대한 수명을 평가한 결과 #80알루미나(입도 $212{\sim}180{\mu}m$)를 이용하는 경우가 가장 효과적인 것으로 나타났다. 기판에 대한 세정 공정은 arc plasma를 이용하는 것이 가장 우수하였으며, 중간층을 형성함에 있어서는 스퍼터링법을 이용하여 Ta 계열의 중간층을 형성하는 방법을 적용하는 것이 가장 바람직한 것으로 확인되었다.

• 한국의상디자인학회지
• /
• 제9권2호
• /
• pp.85-92
• /
• 2007

This study focused on bean-juice treatment method which have dyeing property to indigo, yellow soil, sappan wood, cochineal and also on the possibility of applying to mordanting. This is different from the active mordanting using chemicals. Natural mordants with development of dyeing are not harmful, also are the medicines for disease. Limestone and ash neutralize the acidic soil. bean-juice protein adhere to cellulose surface and change the physical properties of protein so that coloring of dye is better than before and film non-soluble in water is made. Therefore the color made from bean-juice process lasts after washing. This study try to show one of the ways to improve the current method using the heavy metal which can have bad effects for environment and human being. Bean-juice(raw bean, heated bean) treatment method can be the way to fix the natural dyeing problem of bad dyeing. Bean-juice had been treated under various condition with pre-treatment, post-treatment and raw bean, heated bean. Following results are obtained in this study. In the case of Indigo dyeing, pre-treatment of heated bean shows the biggest difference of color. In the case of yellow soil dyeing, pre-treatment of raw bean-juice shows the biggest gap of color. Pre-treatment of heated bean in sappan wood dyeing case and post-treatment of raw bean show bigger color difference than pre-treatment of raw bean. In cochineal dyeing, raw bean pre-treatment shows the biggest color difference.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.598-607
• /
• 2004

In this study, the effects of two pre-treatment processes were observed prior to membrane filtration: pre-coagulation and pre-ozonation. To compare the effect of two above-mentioned pre-treatments, we adopted the four schemes: first one is direct membrane filtration of river surface water, second one is membrane filtration after pre-coagulation, third one is membrane filtration after pre-ozonation and fourth one is membrane filtration after pre-coagulation and pre-ozonation. There are two exceptional characteristics in applied processes. One is the usage of the MF membrane which has high ozone resisting characteristic. Therefore, ozone resides in membrane module during filtration. The other is adoption of Jet Mixed Separator (JMS) as coagulation-sedimentation process. The change in transmembrane pressure and permeate water quality were also examined. As a result, considering the filtration performance efficiency and permeate water quality, the process composed of filtration with combination of both pre-coagulation and pre-ozonation was proved most effective. The improved efficiency was due to the reduction of loading rate of fouling inducing materials to membrane module by coagulation process as well as variable reactions, such as degradation, particle destabilization and coagulation, occurred by residual ozone in membrane module. The additional effect of pre-coagulation before pre-ozonation is suppression of AOC, one of the by-products induced by ozonation. Therefore, combination of pre-coagulation and pre-ozonation is the effective process to overcome the major de-merit of ozonation i.e. by-products formation.