• Steel and Composite Structures
• /
• v.46 no.1
• /
• pp.53-73
• /
• 2023

Man-made structure materials like concrete usually contain inclusions. These inclusions affect the mechanical properties of concrete. In this investigation, the influence of inclusion length and inclination angle on three-dimensional failure mechanism of concrete under uniaxial compression were performed using experimental test and numerical simulation. Approach of acoustic emission were jointly used to analyze the damage and fracture process. Besides, by combining the stress-strain behavior, quantitative determination of the thresholds of crack stress were done. concrete specimens with dimensions of 120 mm × 150 mm × 100 mm were provided. One and two holes filled by gypsum are incorporated in concrete samples. To build the inclusion, firstly cylinder steel tube was pre-inserting into the concrete and removing them after the initial hardening of the specimen. Secondly, the gypsum was poured into the holes. Tensile strengths of concrete and gypsum were 2.45 MPa and 1.5 MPa, respectively. The angle bertween inclusions and axial loadind ary from 0 to 90 with increases of 30. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Diameter of the hole was 20 mm. Entirely 20 various models were examined under uniaxial test. Simultaneous with experimental tests, numerical simulation (Particle flow code in two dimension) were carried out on the numerical models containing the inclusions. The numerical model were calibrated firstly by experimental outputs and then failure behavior of models containing inclusions have been investigated. The angle bertween inclusions and axial loadind vary from 0 to 90 with increases of 15. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Entirely 32 various models were examined under uniaxial test. Loading rate was 0.05 mm/sec. The results indicated that when inclusion has occupied 100% of sample thickness, two tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusion has occupied 75% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusions have occupied 50% and 25% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. Also the inclusion was failed by one tensile crack. The compressive strength of samples decease with the decreases of the inclusions length, and inclusion angle had some effects on that. Failure of concrete is mostly due to the tensile crack. The behavior of crack, was affected by the inclusion length and inclusion number.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.695-701
• /
• 2006

A toluene-degrading bacterial strain was isolated from a mixed culture that was maintained using toluene as a sole carbon and energy source. The isolated bacterium was classified as Pseudomonas sp. TBD4 based on the close relationship to bacteria belonging to this genus. A bottle study to determine biodegradation rates of individual aromatic compounds showed that the biodegradation was faster in the order of toluene, benzene, styrene, and p-xylene. However, when various mixtures were subjected to TDB4, styrene was degraded at the highest rate, indicating that both toluene and p-xylene could stimulate the degradation of other substrates whereas styrene played as an inhibitor. In addition, the mixed culture and TDB4 were inoculated to the bioactive foam reactor (BFR), and the reactor performance and the corresponding change of microbial community were monitored using the fluorescent in situ hybridization (FISH) method. When an inlet concentration of the VOC mixture increased to greater than 250 ppm, the overall removal efficiency dropped significantly. The FISH measurement demonstrated that the ratio of TDB4 to the total bacteria also decreased to less than 20% along with the decline in removal efficiency in the BFR. As a result, the periodic addition of the pre-grown TDB4 might have been beneficial to achieve a stable performance in the BFR operated over an extended period.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.279-288
• /
• 2017

This study investigated the manufacturing of fermented soybean oil using a fermenting strain commonly processed for soybeans [Bacillus amyloliquefaciens (BA), Bacillus subtilis (BS), Lactobacillus acidophilus (LBA), and B. subtilis+L. acidophilus (BLO)] and evaluated its anti-obesity activities. Cytotoxicity of four kinds of fermented soybean oils was not observed in 3T3-L1 preadipocytes at 10 and $50{\mu}g/mL$. Triglyceride content was reduced by 20.6% in the BLO group at a treatment concentration of $50{\mu}g/mL$. The simultaneous treatment of fermented soybean oil and differentiation induction medium decreased $PPAR{\gamma}$ and $C/EBP{\alpha}$ gene expression at a concentration of $50{\mu}g/mL$ and blocked adipocyte differentiation by increasing adiponectin gene expression. The inhibitory effect of adipocyte differentiation was greatest in the BLO group. C57BL/6J mice were examined for 4 weeks after being separated into seven groups [normal diet group (N), high fat diet group (C), group fed high fat diet combined with regular soybean oil (SO), group fed non-fermented soybean oil (NF), and groups fed high fat diet combined with 5% fermented soybean oil (BA, BS, LBA, and BLO)] to identify the effects of soybean oil on body weight, serum lipid, adiponectin, insulin, and leptin levels in mice with high fat diet-induced obesity. The body weight and serum lipid level of the C group increased drastically compared to those of the N group. In contrast, the group fed a diet combined with fermented soybean oil showed decreases in weight, serum total cholesterol, LDL-cholesterol, and triglyceride levels compared to those of the C group. Moreover, soybean oil was found to be effective in the BLO group. In conclusion, fermented soybean oil has positive effects in prohibiting adipocyte differentiation increased by high fat diet and improving serum lipid composition. Therefore, fermented soybean oil can be used as a functional food material with anti-obesity activity.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.

• Weed & Turfgrass Science
• /
• v.4 no.3
• /
• pp.219-224
• /
• 2015

This study was conducted to evaluate the effect of herbicidin, new natural herbicidal substances, derived from soil actinomycetes Streptomyces scopuliridis. Several weed species were subjected to examine the germination inhibition and herbicidal activity at the concentration from 100 to 2,000 ppm. There was no selectivity in germination inhibition and herbicidal activity against crops. Germination of Echinochloa oryzoides, Digitaria ciliaris, Abutilon theophrasti and Amaranthus retroflexus was inhibited completely when 7.81 ppm of extract was treated in petri dish. Pre-emergence application of herbicidin in soil condition showed low inhibition against weeds. However, post application of herbicidin in green house resulted in the necrosis of weeds at the concentration of 2,000 ppm. A. retroflexus was sensitive to herbicidin at the low concentration of 62.5 ppm, whereas E. oryzoides was tolerant to lower concentration of herbicidin until it became withered at the concentration of 2,000 ppm. In conclusion, herbicidal substances derived from S. scopuliridis herbicidin, which is consisted with herbicidin A and B, have dominant effect on germination and growth inhibition. On the other hand, herbicidin was insufficient to control gramineous weeds. In future, it will be needed to develop the combination of herbicidin with other herbicide or compounds to control gramineous weeds as well.

• The Korean Journal of Mycology
• /
• v.41 no.3
• /
• pp.172-180
• /
• 2013

Grey mold infection rate in tomato was investigated with the inoculation of dead flowers on Botrytis selective media. The grey mold infection rate of flower after fruiting were higher in the order of after 45 days, after 25 days, and fruiting day with 100%, 87% and 65%, respectively. The number of infected flowers were increased with time increase after the flowering before fruiting. BSM (Botrytis selective medium) was used to check grey mold infection rate depending on the flowering stage and cultivar. Grey mold infection rate depending on the flowering stage was similar in all the beef-tomato cultivar as 1.5~5% at preflowering, 1.5~45% at flowering and 75~90% at fruiting. On the other hand, cherry tomato cultivar "KoKo" had lower infection rates of 0~3.5% at pre-flowering, 10~30% at flowering and 20~50% at fruiting. These resulted from the fact that beaf-tomato cultivar have much bigger flowers and larger amount of pollens compared to those of cherry tomato cultivar. The amounts of falling pollens of Botrytis spp. were checked for beaf-tomato cultivar and cherry tomato cultivar using BSTM. The amounts of falling pollens were increased as growth period was extended, and the amount of spores increased rapidly during the outbreak of grey mold. Twelve field trials in Buyeo and Iksan areas showed that Fluazinam, and Diethofencarb+Carbendazim were effective fungicides to control tomato grey mold, and these results were similar to those of field trials with BSTM. This is the first report of Fluazinam as a effective fungicide for the control of grey mold of tomato even though it has not been registered yet for the control of gray mold in tomato.

• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.332-338
• /
• 2009

A xylan-decomposing bacterium, HY-20, was isolated from the gut of a honeybee, Apis mellifera, and identified as Bacillus sp. The extracellular GH11 xylanase (XylP) gene (687-bp) of strain HY-20 encoded a protein of 228 amino acids with a deduced molecular mass of 25,522 Da and a calculated pI of 9.33. The primary structure of XylP was 97% identical to that of B. pumilus xylanase (GenBank accession no.: AY526092) that has not been characterized yet. The recombinant His-tagged enzyme (rXylP) overexpressed in Escherichia coli BL21 harboring pET-28a(+)/xylP was purified to electrophoretic homogeneity by cation exchange and gel permeation chromatographies. The purified enzyme exhibited the highest catalytic activity toward birchwood xylan at pH 6.5 and $50^{\circ}C$ and retained approximately 50% of its original activity when pre-incubated at $55^{\circ}C$ for 15 min. The recombinant enzyme was completely inactivated by $Hg^{2+}$ (1 mM) and N-bromosuccinimide (5 mM), while its activity was slightly stimulated by approximately 10% in the presence of $Mn^{2+}$ (1 mM), $Fe^{2+}$ (1 mM), and sodium azide (5 mM). rXylP was able to efficiently degrade various polymeric xylose-based substrates but PNP-sugar derivatives and glucose-based polymers were not susceptible to the enzyme.