• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.131-134
• /
• 2005

This paper presents a computer-aided simulation and robotic-assisted execution technology of external fixation method to achieve fracture reduction and deformity correction in long bones. Combining the kinematic analysis with a graphic model of the tibia and the fixator allowed 3D simulation and visualization of the adjustments required to reduce fracture or correct bone deformity as a pre-operative planning tool. The developed robot model provided accurate deformity correction with small residual deformity based on the results of the planning. By incorporating the robot model with image-guided system and computer-aided planning, the integrated system could be useful for computer-aided pre-operative planning and robotic-assisted execution in fracture treatment and bone deformity surgery.

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.104-111
• /
• 2017

복수의 안테나를 사용하는 Pre-Rake CDMA 시스템은 복잡한 RAKE 합성기를 수신기에서 사용하지 않아도 좋은 수신 성능을 얻을 수 있는 장점이 있다. 그러나 Pre-Rake 시스템은 채널 추정오류에 크게 영향을 받기 때문에 시스템 성능 평가에 있어서 채널추정 오류는 반드시 고려되어야 한다고 볼 수 있다. 본 논문에서는 채널추정오류를 가지는 MISO Pre-Rake CDMA 시스템을 이론적인 해석을 통하여 분석한 후 도출된 결과를 컴퓨터 시뮬레이션을 이용해 얻은 결과와 비교한다. 이론적인 해석결과로 볼 때, Pre-Rake 시스템의 성능은 진폭오류 보다는 위상오류에 의한 영향을 크게 받는 것으로 확인되었다.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.1-8
• /
• 2017

P-PIE is a program developed to estimate failure probability of pipes and pressure vessels considering fatigue and stress corrosion crack growth. Using the program, crack growth simulation was performed with an initially existing crack in order to examine the effects of initial crack depth distribution on the leak probability of pipes. In the simulation stress corrosion crack growth was considered and several crack depth distribution models were used. From the results it was found that the initial crack depth distribution gives great effect on the leak probability of pipes. The log-normal distribution proposed by Khaleel and Simonen gives lower leak probability compared other exponential distribution models. The effects of the number and the quality of pre-service and in-service inspections on the leak probability were also examined and it was recognized that the number and the quality of pre-service and in-service inspections are also give great effect on the leak probability. In order to reduce the leak probability of pipes in plants it is very important to improve the quality of inspections. When in-service inspection is performed every 10 years and the quality of inspection is above the very good level, the leak probability shows nearly constant value after the first inspection for an initially existing crack.

• 한국생산제조학회지
• /
• 제25권1호
• /
• pp.89-95
• /
• 2016

This study investigated the design factors of the opening area in order to consider the kinematic stability of a valve plate, conducting an analysis of the reduction effects of pressure pulsation and flow ripple depending on the design factors, using the $SimulationX^{(R)}$ (Germany) hydraulic analysis program. Further, we performed a structure analysis to confirm the kinematic stability of the valve plate in a swash plate type piston pump, and analyzed the effects of pulsation on a 1-step V-type notch, 2-step V-type notch, and 2-step U-type notch to determine the effects of pulsation reduction. Finally, we show the effectiveness of our proposed design of the pre-compression sections on a valve plate in terms of low pulsation by using the hydraulic analysis program, $SimulationX^{(R)}$.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 2부
• /
• pp.518-523
• /
• 2006

As digital broadcasting process and information compressing technologies developed, digital technologies have been used extensively in many visual media such as movies and TV programs, and it is required to develop a new process for 3 dimensional digital programs. The study attempts to develop a new digital video-producing process through pre-simulation using a digital storytelling method, in order to increase the quality of broadcasting, reducing the producing time and improve efficiency. This system, supposed to be used to produce actual broadcasting, includes all tools needed for broadcasting in the program, so users can select an appropriate set among the pre-made library, which saves time for making sets. Also, it offers a storyboard making function by perfectly representing the functions of a virtual camera, and enables users to make the better storyboard, checking the real time movies. In addition, it recognizes objects though avatars, organizes the appropriate set for these avatars to act, and embodies a variety of avatar movements through which it reaffirms the camera's position and organization, minimizing errors and saving time and budget.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.447-455
• /
• 2013

Hemicellulose extract obtained by pre-pulping extraction of woodchips, is very diluted acidic in nature. The major component responsible for this weak acidity is acetic acid, present in levels up to 5~10 g/L. Here, we report an exploratory study on the extract upgrading by reactive solvent extraction of acetic acid as well as ASPEN simulation. In this study, liquid-liquid equilibria for the ternary systems (water + acetic acid + ethyl acetate) were measured at the temperature of 298.15 K and 10 (pH = 2.02), 5 (pH = 2.17), and 1 (pH = 2.48) percent of acetic acid samples were used to carry out liquid-liquid extraction studies using ethyl acetate. In a one-stage batch experiment, 96.0% of acetic acid could be extracted for the solvent when the ratio of organic-to-aqueous phases is 4:1. For simulation results, they were used to estimate the interaction parameters between each of the three compounds of the systems studied for the NRTL and UNIQUAC models. The estimated interaction parameters were successfully used to predict the equilibrium compositions by the two models.

• 한국유체기계학회 논문집
• /
• 제16권3호
• /
• pp.26-31
• /
• 2013

In present 3D CFD study, the method for determining leakage and rotordynamic coefficients of a plain-gas seal is suggested by using the relative coordinate system for steady-state simulation. In order to find the effect of pre-swirl speed at seal inlet, pre-swirl velocity is included as a parameter. Present analysis is verified by comparison with results acquired from Bulk-flow analysis code and published experimental results. The results of 3D CFD rotordynamic coefficients of direct stiffness(K) and cross-coupled stiffness(k) show improvements in prediction. As pre-swirl speed at seal inlet increases, k also increases to destabilize system. However, pre-swirl speed at seal inlet does not show sensitivity to the leakage and rotordynamic coefficients of K and damping(C).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권12호
• /
• pp.3135-3148
• /
• 2013

The popularization of streaming networks and mobile devices brings a new kind of network called mobile peer-assisted streaming network. In this network, service provider not only offers downloading services, but also pre-pushes resources to users for caching. Users can download their demanded resources while working as servers for uploading the cached data. Also the mobile characteristic makes high package losing probability in this network. So we study how the service provider pre-pushes or the user downloads resources efficiently and effectively while considering the package losing in this paper. We build utility models for service provider and user, and solve the models using Bellman's theory to achieve Nash Equilibrium which shows the service provider's optimal pre-pushing speed and user's optimal downloading speed. The numerical simulation demonstrates the efficiency and effectiveness of our proposed pre-pushing and downloading scheme by comparing to the traditional scheme.

• 한국철도학회논문집
• /
• 제19권3호
• /
• pp.288-296
• /
• 2016

400km/h급 전차선로가 우리나라에 시범 부설되었다. 400km/h 심플 커티너리를 설계함에 있어서 사전이도를 어떻게 해야 하는가는 관심이 집중된 엔지니어링 항목이다. 사전이도는 일정 고속 대역에서 집전성능을 향상시키는 것으로 알려져 있다. 그러나 400km/h 속도에서 효과에 대해서는 아직 정립되어있지 않다. 400km/h 커티너리에서 적절한 사전이도량을 파악하기 위하여 사전이도 0과 1/3000 조건에서 전차선과 팬터그래프 사이 동적 성능 예측 시뮬레이션을 실시하였다. 이 예측에 근거하여 400km/h 전차선로 설계에서는 0 사전이도를 채택하였다. 그리고 400km/h 전차선로 시범구간(28km)을 건설하면서 일부구간에 1/3000 사전이도 구간(약 1km)을 조성하였다. HEMU-430X 열차를 투입하여 사전이도 조성 구간을 포함하여 시범구간에서 접촉력 측정을 실시하였다. 본 논문에서는 사전이도 조성 구간과 사전이도가 없는 구간의 동적 성능(접촉력)에 대하여 기술하며 그 둘을 비교한다. 결론적으로 400km/h 전차선로에서 사전이도를 주지 않은 구간이 1/3000 사전이도 구간보다 양호한 동적(집전) 성능을 나타냄을 해석적 및 실험적 검토를 통하여 확인하였다.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.101-108
• /
• 2010

The drum clutch investigated in this study is formed in 5 forming steps, which are 1st deep drawing, 2nd deep drawing, restriking, embossing, and $Grob^{TM}$ processes. Dimensional accuracy of the final products greatly depends upon how much more accurate pre-form is manufactured in the previous forming processes before the $Grob^{TM}$ process. The deep drawing, restriking and embossing processes in which the pre-form is formed are very important and decisive steps. Thus in some cases, excessive strain by these operations causes dimensional inaccuracy and cracks initiated from the base and wall of the product. Process variables such as the punch shapes both of 1st and 2nd deep drawing, and punch angle were selected to evaluate the deformation characteristics. The optimum parameters were determined from forming simulations using commercial FEM codes, DEFORM and Tauchi method, specifically developed for metal forming simulation. Finally, experiments for the whole drum clutch forming processes were carried out to verify the optimized forming parameters and the analytical results.