• Title/Summary/Keyword: Pre-simulation

Search Result 1,172, Processing Time 0.03 seconds

A FEASIBILITY STUDY ON THE NUMERICAL PRE-ASSEMBLY SIMULATION USING 3D LASER SCANNING MEASUREMENT

  • Kyoungmin Kim ;Seok Kim ;Chan-Hyuk Park ;Kyong Ju Kim
    • International conference on construction engineering and project management
    • /
    • 2005.10a
    • /
    • pp.1193-1198
    • /
    • 2005
  • The pre-assembly takes a large portion of the fabrication cost of steel bridges. In order to save the fabrication cost through the improvement of the conventional pre-assembling process, this research investigates a numerical pre-assembly simulation as an alternative to current pre-assembling process. The 3D laser scanning was utilized in site and measuring data for steel box were analyzed. The productivity of pre-assembly simulation system is compared with the conventional pre-assembling system. This paper identifies feasibility on the alternative pre-assembling process and then proposes the scheme of the pre-assembly simulation system development satisfying the current pre-assembly inspection of standards.

  • PDF

Development of the Pre-Release Simulation System Using Generic Agricultural System Simulator(GASS) (범용적 농업 시스템 시뮬레이터(GASS)를 이용한 예비방류 모의 시스템의 개발)

  • Song, Sang-Ho;Lee, Jeong-Jae;Kim, Han-Joong;Yi, Ho-Jae
    • Proceedings of the Korean Society of Agricultural Engineers Conference
    • /
    • 2003.10a
    • /
    • pp.539-542
    • /
    • 2003
  • In South Korea, flooding is controlled with large or small reservoirs scattered spatially over the territory. Because recent unexpected hard-rain events requires more flood control capacities, the pre-release system is considered with the most economical alternative. In this case time and volume of discharge should be determined by the simulation. But, existing pre-release simulation system has the problem of specificity. Therefore, GASS is considered to estimate the pre-release time and volume with different configurations of pre-release system. This paper shows that pre-release simulation system could be constructed with arranging GASAtmosphere, GASWatershed, Reservoir, Gate components using GASS. It is also shows that GASS could be used as a foundation for constructing pre-release simulation system that is easy to use and is flexible to reflect the changing configurations of reservoir systems.

  • PDF

Interface Development for Pre and Post processor on EDISON Platform Simulation System (EDISON 플랫폼 시뮬레이션 시스템에서 전처리 및 후처리기 연계를 위한 인터페이스 개발)

  • Kwon, Yejin;Jeon, Inho;Seo, Jerry H.;Lee, Jongsuk R.
    • Journal of Internet Computing and Services
    • /
    • v.21 no.1
    • /
    • pp.103-110
    • /
    • 2020
  • The EDISON is a platform that supports numerical analysis for problem solving in computational science and engineering. We provide a cloud service for users, and provide an environment to access and execution of the simulation service on the web. For now, the EDISON platform provides simulation services for eight applied field on computational science engineering. Users can check the numerical analysis result by web in the computational science and engineering platform. In addition, various services such as community activity with other researchers, and the configuration of simulation environment by user 's needs can be provided. A representative service of the EDISON platform is a web-based simulation service that performs numerical analysis for problem solving of various computational science and engineering. Currently, EDISON platform provides workbench simulation service. It is the web-based simulation execution environment, and result analysis to provide simulation regardless of various personal computing resource or environment in each numerical analysis. In this paper, we build an interface for pre and post processor that can be used in conjunction with the workbench-based simulation service provided by EDISON platform. We provide a development environment with interface that is implemented by applying a pre and post processor optimized for the simulation service. According to simulation and execution are performed by linking the new workbench-based simulation service to the pre and post processor.

The Effects of Simulation-Based Training, Underwent Before or After the Clinical Practice for the Nursing Students (간호대학생의 임상실습 전과 후에 실시하는 시뮬레이션 실습교육의 효과 비교)

  • Lee, Jung Ok
    • The Journal of Korean Academic Society of Nursing Education
    • /
    • v.20 no.2
    • /
    • pp.203-211
    • /
    • 2014
  • Purpose: This study was conducted to compare the effects of simulation-based training on knowledge, self-efficacy and clinical performance, underwent before or after the clinical practice for the nursing students. Method: A comparison group design was established with pre-clinical practice group (n=34) and post-clinical practice group (n=34). Both groups participated in simulation-based training before or after the clinical practice at the recovery room. Chi-square test, t-test and paired t-test were performed to analyze the data. Results: Both groups showed significantly higher post-test scores in knowledge and self-efficacy than pre-test scores (p<.001). The group with simulation training performed before their clinical practice (pre-clinical practice group) showed significantly higher self-efficacy (p=.044) than the group with simulation training done after their clinical practice (post-clinical practice group). However, there was no significant difference in the knowledge (p=.922) and clinical performance (p=.887). Conclusion: These findings of the study suggest that simulation based training in pre-clinical practice is effective to enhance the self-efficacy and to improve knowledge and clinical performance of the nursing students.

Impact of Pre-briefing using Structured Video in the Pre-hospital Trauma Care Simulation-based Education (시뮬레이션 기반 병원 전 외상 교육 과정에서 구조화된 동영상을 적용한 사전브리핑이 몰입감, 자신감, 만족도에 미치는 영향)

  • Park, Si-Eun;Kwak, Yu-Mi
    • Journal of Korea Entertainment Industry Association
    • /
    • v.14 no.7
    • /
    • pp.421-427
    • /
    • 2020
  • The aim of this study was to examine the impacts of pre-briefing using structured video simulations in the pre-hospital trauma care simulation-based education on simulation immersion, simulation confidence, and simulation satisfaction. For both the experimental group and the control group, orientations were conducted on the simulation environment. Subsequently, the experimental group watched a video of about 8 minutes, similar to the scenario situation, in which the goal and result of the training were presented. The control group, on the other hand, conducted a classical way of orientation related to the scenario during the same time period. In addition, the experimental group and the control group underwent simulation practice in the same situation for 12 minutes, and debriefing was performed for 40 minutes by the same research assistant. Afterwards, we measured the simulation immersion, confidence, and satisfaction of the participants. Data were analyzed using χ2 and independent t-test using the SPSS 22.0 program. It was found that the experimental group that conducted the pre-briefing using video had higher immersion and confidence than the control group. On the other hand, satisfaction was not significantly different between the two groups. The results indicate that pre-briefing using structured video was an effective educational method to increase simulation immersion and simulation confidence.

The effects of Pre-briefing Team-based Learning in Standardized Patients Simulation (표준화 환자 시뮬레이션 실습교육기반의 간호교육에서 사전브리핑을 활용한 팀 기반 학습 효과)

  • Kim, Hyun-Ju
    • Journal of Digital Convergence
    • /
    • v.18 no.8
    • /
    • pp.271-279
    • /
    • 2020
  • Simulation practice training is used in nursing education as an education method to improve the adaptability to the clinical field, but responds to unpredictable situations and negatively affects practice satisfaction. This study applied a team-based learning utilizing a pre-briefing inequality controls ago to investigate the effect of self-efficacy, simulation practice satisfaction and clinical performance of the nursing college in the simulation based nursing education and after quasi-experimental study. Data collection in the fourth grade and P University Nursing 72 peoples, the study period is from November 15 from October 14, 2019. As a result, the experimental group that applied team-based learning using pre-briefing showed higher self-efficacy, simulation practice satisfaction, and clinical performance than the control group. Therefore, applying team-based learning to the pre-briefing process can be an important learning strategy for simulation practice training, and suggests a follow-up study to confirm the effectiveness by standardizing the pre-briefing step later.

Improved PCA method for sensor fault detection and isolation in a nuclear power plant

  • Li, Wei;Peng, Minjun;Wang, Qingzhong
    • Nuclear Engineering and Technology
    • /
    • v.51 no.1
    • /
    • pp.146-154
    • /
    • 2019
  • An improved principal component analysis (PCA) method is applied for sensor fault detection and isolation (FDI) in a nuclear power plant (NPP) in this paper. Data pre-processing and false alarm reducing methods are combined with general PCA method to improve the model performance in practice. In data pre-processing, singular points and random fluctuations in the original data are eliminated with various techniques respectively. In fault detecting, a statistics-based method is proposed to reduce the false alarms of $T^2$ and Q statistics. Finally, the effects of the proposed data pre-processing and false alarm reducing techniques are evaluated with sensor measurements from a real NPP. They are proved to be greatly beneficial to the improvement on the reliability and stability of PCA model. Meanwhile various sensor faults are imposed to normal measurements to test the FDI ability of the PCA model. Simulation results show that the proposed PCA model presents favorable performance on the FDI of sensors no matter with major or small failures.

Pre-simulation based Automatic Landing Approach by Waypoint Guidance for Fixed-Wing UAV (사전 시뮬레이션과 점항법 유도를 이용한 고정익 무인기의 자동 착륙 접근)

  • Lee, Jehoon;Park, Sanghyuk
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.49 no.7
    • /
    • pp.557-564
    • /
    • 2021
  • This paper describes an automatic landing approach algorithm for fixed-wing UAVs using waypoint guidance. The proposed algorithm utilizes simple 2D Dubin's vehicle pre-simulations in planning the waypoints for landing approach. The remaining time to reach the runway is also estimated in the pre-simulation, and it is used for altitude control. The performance of the designed algorithm was verified by simulations and flight tests.

Development of the PRE-MARK and the Core Model for Kori Unit 1 Simulator (고리1호기 시뮬레이터 PRE-MARK 및 노심모델 개발)

  • 홍진혁
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 2003.06a
    • /
    • pp.101-105
    • /
    • 2003
  • 본 논문은 고리 1호기 원자력발전소를 기준발전소로 하여 개발된 PRE-MARK 소개 및 PRE-MARK을 기반으로 개발된 노심모델의 결과를 제시하고자 하는 것을 주된 목적으로 하고 있다. 노심 모델개발에는 REMARK 모델 프로그램을 기반으로 개발된 PRE-MARK를 이용하였으며, PRE-MARK의 주요 특징으로는 노심모델 입력자료를 노심설계코드 및 Lattice 코드로부터 자동으로 생성하며여 GUI 기반으로 변경된 REMARK으로 입력하여 노심모델을 구동함과 동시에 실시간으로 중요 변수의 현재 값들을 그래프로 도시해줌으로 조율 (Tuning) 상수를 용이하게 결정할 수 있도록 하는 것이다. 또한 BOL 및 EOL에서 HFP 평형 Xenon조건에서의 제어봉 위치에 따른 제어봉가(Rod worth)를 고리 1호기 20주기 NDR (Nuclear Design Report)과 비교하고, 원자로정지 이후 BOL, MOL 및 EOL에서의 시간에 따른 Xenon의 반응도 영향을 비교함으로 개발된 모델의 건전성을 입증하였다.

  • PDF

Development of the PRE-MARK and the Core Model for Korea Nuclear Power Education Center ( KNPEC) -2 Simulator (원자력교육원 2호기 시뮬레이터 PRE-MARK 및 노심모델 개발)

  • 홍진혁;이명수;박신열;유현주
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 2000.11a
    • /
    • pp.78-83
    • /
    • 2000
  • 본 논문은 영광 1호기 원자력발전소를 기준발전소로 하여 개발된 PRE-MARK 소개 및 PRE-MARK을 기반으로 개발된 노심모델의 결과를 제시하고자 하는 것을 주된 목적으로 하고 있다. 노심 모델개발에는 REMARK 모델 프로그램을 기반으로 개발된 PRE-MARK를 이용하였으며, PRE-MARK의 주요 특징으로는 노심모델 입력자료를 노심설계코드 및 Lattice코드로부터 자동으로 생성하며 GUI 기반으로 변경된 REMARK으로 입력하여 노심모델을 구동함과 동시에 실시간으로 중요 변수의 현재 값들을 그래프로 도시해줌으로 조율 (Tuning) 상수를 용이하게 결정할 수 있도록 하는 것이다 또한 BOL 및 EOL에서 HFP 평형 Xenon 조건에서의 제어봉 위치에 따른 제어봉가(Rod worth)를 영광 1호기 12주기 NDR(Nuclear Design Report)과 비교하고, 원자로정지 이후 BOL, MOL 및 EOL에서의 시간에 따른 Xenon의 반응도 영향을 비교함으로 개발된 모델의 건전성을 입증하였다.

  • PDF