• Smart Structures and Systems
• /
• v.8 no.2
• /
• pp.219-237
• /
• 2011

This paper presents novel research into the source localization of multiple impacts. Source localization technology for single impact loads in a plate structure has been used for health monitoring. Most of research on source localization has been focused only on the localization of single impacts. Overlapping of dispersive waves induced by multiple impacts and reflection of those waves from the edge of the plate make it difficult to localize the sources of multiple impacts using traditional source localization technology. The method solving the overlapping problem and the reflection problem is presented in the paper. The suggested method is based on pre-signal processing technology using band pass filter and optimal filter. Results from numerical simulation and from experimentation are presented, and these verify the capability of the proposed method.

• Journal of Sensor Science and Technology
• /
• v.14 no.1
• /
• pp.7-15
• /
• 2005

A sensor and measuring system were implemented to measure both uroflow and urophonography signal during urination for diagnose the lower urinary tract symptom. The implemented system was composed of the uroflow sensor using the load-cell, the urophonography measurement sensor so as stethoscope type, pre-processing part for sensors signal detection, amplifier and filter, system control parts and PC measurement program. A simulator of the lower urinary system that is experimental equipment implemented for evaluate the developed system. The two signals were measured using implemented system and analyzed these signal by means of time domain and frequency domain for extraction of the characteristic parameter which can most effectively reflected by the occlusion of the lower urinary system. Furthermore two signals were measured and analyzed with the subject of 5 healthy adult for clinical application possibility of the implemented system. As a result, the most influence bandwidth of effect according to occlusion of the lower urinary system is $253{\sim}282$ Hz of the urophonography signal.

• Structural Engineering and Mechanics
• /
• v.66 no.2
• /
• pp.185-193
• /
• 2018

In this study, low- and high-frequency structure behaviors were identified and a systematic analysis procedure was proposed using noisy GPS data from a 165-m-high tower in ${\dot{I}}stanbul$, Turkey. The raw GPS data contained long- and short-periodic position changes and noisy signals at different frequencies. To extract the significant results from this complex dataset, the general structure and components of the GPS signal were modeled and analyzed in the time and frequency domains. Uncontrolled jumps and deviations involving the signal in the time domain were pre-filtered. Then, the signal was converted to the frequency domain after applying low- and high-pass filters, and the frequency and periodic component values were calculated. The spectrum of the tower motion obtained from the filtered GPS data had dominant peaks at a low frequency of $1.15572{\times}10-4Hz$ and a high frequency of 0.16624 Hz, consistent with two equivalent GPS datasets. Then, the signal was reconstructed using inverse Fourier transform with the dominant low frequency values to obtain filtered and interpretable clean signals. With the proposed sequence, processing of noisy data collected from the GPS receivers mounted very close to the structure is effective in revealing the basic behaviors and features of buildings.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.8
• /
• pp.767-773
• /
• 2009

This research have introduced wavelet signal processing technic for improving navigation signals. INS signals can be distorted with conventional pre-filtering method such as low-pass filtering by unwanted smoothing on real signals. But in this paper, wavelet thresholding method is implemented to INS signal to denoise for INS-GPS integrated system. This method reduces signal noise but not distorts the rapid varing signal. And this paper applied thresholding to INS-GPS integrated navigation system and improved navigation performance.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1
• /
• pp.81-87
• /
• 1997

In this paper, a new pre-processing method for the recognition of single vowels by use of spectrum envelope is presented. We use new extraction method of a spectrum envelope using the diffusion filter bank. By dividing analysis band of a diffusion filter bank into subbands, we decreased the number of diffusion process. And, by increasing the number of difference, we got higher selectivity. As a result of them, we reduced the total processing time, and got higher enhancement of discrimination. By getting 88.3% of average recognition rate for single vowels of natural voice through computer simulation. We confirmed it to be useful for speech recognition which use spectrum analysis of the voice signal to have many frequency components.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.1
• /
• pp.49-56
• /
• 1994

This paper describes the design principles and methods of electronic processor for thermal imager with the SPRITE detector, operating in the 8-12 micron band. The thermal imager consists of a optical scanner containing the detector and an electrical signal processor. The optical scanner utilizing rotating polygon and oscillating mirror, is 2-dimensional serial/parallel scan type using 5 elements of the detector. And the electronic processor has pre-processing of 5 chnanel's thermal signal from the detector, and performs digital scan conversion to reform the parallel data stream into serial analog data compatible with conventional RS-170 video. Through the designed electronic processor, we have acquired a satisfactory thermal image. And the MRTD (Minimum Resolvable Temperature Difference) is 0.5$^{\circ}$K at 7.5 cycles/mm.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.42-46
• /
• 2002

In this paper, a new pre-processing algorithm is proposed to improve the performance of stereo acoustic echo canceller. The proposed algorithm has the improved performance by the estimation error reduction of filter coefficient using input signal which was reduced reverberation of room in the basis MINT (Mu1tip1e-input/output Inverse Theorem) filtering. For real stereo speech signal and real room impulse response the results of simulation, we showed that the proposed method could improved 3∼5 dB ERLE (Echo Return Loss Enhancement) regardless of NLMS (Normalized Least Mean Square) and Projection adaptive algorithm.

• Smart Structures and Systems
• /
• v.23 no.2
• /
• pp.173-184
• /
• 2019

The main objective of this study is to evaluate the true fracture energy and monitor the damage progression in steel fibre reinforced concrete (SFRC) specimens using acoustic emission (AE) features. Four point bending test is carried out using pre-notched plain and fibre reinforced (0.5% and 1% volume fraction) - concrete under monotonic loading. AE sensors are affixed at different locations of the specimens and AE parameters such as rise time, AE energy, hits, counts, amplitude and duration etc. are obtained. Using the captured and processed AE event data, fracture process zone is identified and the true fracture energy is evaluated. The AE data is also employed for tracing the damage progression in plain and fibre reinforced concrete, using both parametric- and signal- based techniques. Hilbert - Huang transform (HHT) is used in signal based processing for evaluating instantaneous frequency of the acoustic events. It is found that the appropriately processed and carefully analyzed acoustic data is capable of providing vital information on progression of damage on different types of concrete.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.484-486
• /
• 2018

Recently, with the increase in use of digital equipment in various fields, the importance of image and signal processing is increasing. However, many types of noise are generated during transmission and reception of digital signal, causing errors. For this reason, noise removal is mandatorily performed during pre-processing phase in many fields. In the present paper, noise is classified through noise evaluation, and noise removal is performed to remove impulse noise and noise with AWGN-added noise. And, proposed is an algorithm which utilizes modified Gaussian filter and directional effective pixels according to noise type. Simulation results show superior noise-removal characteristics, and for objective evaluation, compared with conventional methods.

• Journal of Biomedical Engineering Research
• /
• v.17 no.2
• /
• pp.221-226
• /
• 1996

Tendon reflex responses generated from mechanical stimulus had been studied for quantitative analysis of activity of tendon reflex, especially patellar tendon reflex responses are known to be a criterion for diagnosing the L3 or L4 radiculopathy. In this paper, we developed a digital signal processing system for analysis of the tendon reflex response. The system parameter, i.e., $\textit{sampling frequency, pre-amplification gain, input channel and filter bank}$ are selected by Using software switches. From the view points of flexibility, the system hardware is connected to an IBM PC for analyzing the tendon reflex parameters, amplitude, latency duration We applied the proposed system to the analysis of the patellar tendon reflex reponses. In the experiment, we measured latency, duration, amplitude of the reflex action potentials generated from vastus medialis, vastus lateralis and rectus femoris that compose quadriceps, and the measured data are analyzed througll the ANOVA test which has 5% significant level. As a result, we showed that the mean amplitude of reflex action potential at the vastus lateralis is larger than any other muscle and the mean latency of the reflex action potential at the rectus femoris is shorter than any other muscle.