• The Plant Pathology Journal
• /
• v.22 no.3
• /
• pp.271-277
• /
• 2006

The interaction effects of ozone $(O_3)$ and anthracnose (Colletotrichum acutatum) disease were examined in green fruits and seedlings of pepper (Capsicum annuum). Pre-treatment with $(O_3)$ as a factor causing predisposition to the disease prior to infection was investigated in green fruits and stems using an $(O_3)$ concentration of 150 nL/L, which is easily reached in summer in Korea. $(O_3)$ treatment increased antioxidative responses in pepper foliar tissues, and defense against anthracnose was examined in fruits and stems. Anthracnose severity on stems of the $O_3-treated$, ozone-sensitive 'Dabotop' cultivar was always lower than that on untreated plants, but the difference was not always significant (p=0.147). Significantly lower anthracnose severity was found on $O_3-treated$ green 'Dabotop' fruits as compared to untreated green fruits in three of eight replicate experiments. In contrast, hypersensitive responses in 03treated seedlings were significantly accelerated compared to those in untreated seedlings by about 7.8 h (p<0.001). This confirmed previous evidence of increased transcription of plant defense genes with $(O_3)$ treatment. $(O_3)$ treatment significantly decreased chlorophyll concentrations in the leaves in four replicate experiments (p<0.01). $(O_3)$ increased hypersensitive responses in the leaves of pepper seedlings, but this increase did not contribute to the control of anthracnose severity on fruits. Antioxidant reactions to $(O_3)$ were limited to chlorosis and changes in hypersensitive responses in leaves.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.6
• /
• pp.641-646
• /
• 2008

In this research, recovery of high quality organics from excess activated sludge and its potential as a external carbon sources for BNR process was studied. By simultaneous treatment of alkali and ozone, TSS concentration was reduced by 32%, and RBDCOD fraction was increased by 76.2%, and major constitute of produced organic were acetic acid and propionic acid. Also, nitrogen and phosphorus were greatly solubilized. However, because acid-hydrolyzable phosphorus(AHP) was major part of solubilized phosphorus, $NH_4{^+}-N$ and $PO_4{^3}-P$ concentration were insufficient for effective formation of crystal like as MAP(Magnesium Ammonium Phosphate) and hydroxyapatite. By placing BPR reactor before alkali-ozone treatment reactor, $PO_4{^3}-P$ concentration in pretreated sludge was increased by 1.8 times, and improved potential of phosphorus recovery by crystallization. In experiment of crystallization, hydroxyapatite formation was more easily applied than MAP. By hydroxyapatite formation, $SCOD/PO_4-P$ ratio was greatly increased from 32.7 at control to 141.9 at $Ca^{2+}/PO{_4}^{3-}-P$ mole ratio of 2.4. The results based on this study indicated that the proposed system configuration has potential to reduce the excess sludge production, to recover phosphorus in usable forms as well as utilize organics as a external carbon source in BNR process.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.86-90
• /
• 2008

Water reuse of effluent is limited, due to bacteria and chromaticity or turbidity which may result in low perception of water quality. Consequently, this study showed a method in the reuse of treated wastewater by a diversified treatment method, with separation of centralized reformation of aeration tank into pre-treatment with minimum installation of facilities, and post-treatment, applying advanced oxidation treatment. A pilot plant experiment was performed using Sym-Bio process adopting an NADH Sensor without modification of the exiting aeration tank. The Dissolved Ozone Flotation process, which is an advanced oxidation process, to treat the remaining organics, nutrients, chromaticity, turbidity and bacteria. As a result in the Sym-Bio process, the biological treatment, even on the condition of single stage reaction tank, the treatment efficiencies of BOD, $COD_{Mn}$, $COD_{Cr}$, SS and T-N were 96.6%, 84.6%, 88.25%, 95.1% and 71.0%, respectively, while that for T-P was 25.0%, which required further treatment. In the Dissolved Ozone Flotation process, the advanced oxidation treatment, the treatment efficiencies of BOD, $COD_{Mn}$, $COD_{Cr}$, SS, T-N, T-P, chromaticity, turbidity, bacteria, coliforms were 78.9%, 34.6%, 28.7%, 48.0%, 70.4%, 82.4%, 84.0%, 74.5%, 99.8% and 99.4%, respectively.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.752-760
• /
• 2018

The lowering of temperature for combustion of diesel particulate matters (or diesel soot) is one of the important tasks in automotive industry that is searching for a way to meet up "high-fuel efficiency, low-emission" standard. In this study, it was discussed how the use of ozone over platinum-based catalyst promotes a low-temperature soot oxidation occurred at $150^{\circ}C$. The use of platinum catalyst did not increase oxidation rate largely but was very effective in improving the selectivity of carbon dioxide. The pre-oxidation of NO into $NO_2$ using ozone was rather crucial in improving the oxidation rate of soot at $150^{\circ}C$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.13-18
• /
• 2019

Sewage sludge treatment is increasing every year due to improvement of living and urbanization. However, interest in anaerobic digestion which is one of the recycling technology. There is anaerobic digestion of increasing due to limitations of ocean dumping and final disposal. But, the limit of anaerobic digestion efficiency due to the advanced treatment of sewage has been limited, and studies for solubilization technology have been actively conducted. Therefore, in this study, we aimed to investigate the variation of generation of scum and the solubilization efficiency in the application of pre-treatment of ozone reaction and the change of properties of digested sludge with wet milling. There are results of VS/TS increased by 4.4% and $SCOD_{cr}/TCOD_{cr}$ increased by 9.4% by wet milling alone. In addition, the increase of the specific surface area due to which the reduction of the particle size of the solid content of the sludge in the ozone reaction caused by wet milling decreased the generation rate of scum at 14.3% and increased VS/TS at 2.1%, compared with the ozone reaction alone. From these results, it is expected that the application of wet milling can be increased the contact efficiency with solids in the sludge during ozone reaction with suppress scum and increase the efficiency of the subsequent process in anaerobic digestion.

• Journal of Environmental Science International
• /
• v.26 no.5
• /
• pp.661-674
• /
• 2017

This study used questionnaires to investigate how pre-service elementary teachers understand ocean acidification. As a result of gender, female teachers were more aware of ocean acidification than male teachers, but male teachers had a higher average rate of correct answers, with a lower standard deviation. Teachers from the natural sciences knew more about ocean acidification than did teachers the liberal arts. Teachers ranked environmental crisis in order of most dangerous to least dangerous as follow: global warming and the greenhouse effect, ozone depletion, ocean acidification, and acid rain. About 46.7% of teachers learn about ocean acidification through education, followed by broadcasts, school lectures and the internet. The educational materials most desired for teachers were videos related to ocean acidification. Pre-service elementary teachers have two broad perspectives on ocean acidification. Firstly, they refer to economic loss and food shortages, and secondly, they note that there is a need for improved awareness and publicity about ocean acidification. The role of elementary school teachers is important because their awareness of environmental issues has a considerable effect on teachers perception of the environment. Revitalizing education on ocean acidification and government support are necessary to effectively communicate the seriousness of ocean acidification. Lastly, we need to study ocean acidification in detail so as to be able to persevere toward protecting our ocean ecosystem.

• Journal of the Korean Professional Engineers Association
• /
• v.15 no.2
• /
• pp.24-31
• /
• 1982

This study concerns with the reduction of the COD and deceleration of dyeing wastewater from DAEGU city area by ozonation. The COD reduction by ozonation follows near linear relationships versus ozonation time, temperature and concentration. The color in dyeing wastewater and of dyes can he strikingly reduced as the water is quasi colorless after ozone treatment. COD reduction rate of wastewater was found not to be dependented on pH, however, high temperature gave better results, although economically not feasible. The ozonation of dyeing wastewater can give good results when dyes, scouring agent and sticking agents were pre-separated.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1274-1279
• /
• 2006

The formation characteristics of $BDOC_{rapid}$ and $BDOC_{slow}$ with different ozone dosages for 3 different kinds of waters from Maeri raw water in the down stream of Nakdong river, Hoidong reservoir water in Busan City and treated Maeri raw water(sand filtered) has been investigated in this study. The ozone dosages for producing maximum $BDOC_{total}$ in the Maeri raw water, Hoidong reservoir water and sand filtered water of Maeri were 0.9, 1.1 and 1.4 $mgO_3$/mgDOC respectively. It could be concluded that the ozone dosages for formations of maximum $BDOC_{total}$ were determined by characteristics of water. The ozone dosages for producing maximum $BDOC_{rapid}$ in the Maeri raw water, Hoidong reservoir water and sand filtered water of Maeri were 0.9, 0.9 and 1.0 $mgO_3$/mgDOC respectively that were same or lower than the used ozone dosages for producing maximum $BDOC_{total}$. $BDOC_{slow}$ was being formated and increased continuously with the higher ozone dosages which were the used ozone dosages for maximum formation of $BDOC_{total}$ and $BDOC_{rapid}$. For the best results of a pre-treatment of biofiltration, the optimum ozone dosage ranges in formation of $BDOC_{rapid}/BDOC_{total}$ were $0.6{\sim}1.0\;mgO_3$/mgDOC that were lower than the ozone dosage ranges of $0.9{\sim}1.4\;mgO_3$/mgDOC for the maximum formation $BDOC_{total}$. The reported results indicated that the best and effective ways from economic and technical points of view to determine the optimum ozone dosages of the pretreatment of biofilteration process were investigating and classifying BDOC.

• Journal of Information Display
• /
• v.11 no.3
• /
• pp.113-118
• /
• 2010

The effect of hydrogen in the alumina gate insulator on the bottom gate oxide thin film transistor (TFT) with an InGaZnO film as the active layer was investigated. TFT with more H-containing alumina films (TFT A) fabricated via atomic layer deposition using a water precursor showed higher stability under positive and negative bias stresses than that with less H-containing alumina deposited using ozone (TFT B). While TFT A was affected by the pre-vacuum annealing of GI, which resulted in $V_{th}$ instability under NBS, TFT B did not show a difference after the pre-vacuum annealing of GI. All the TFTs showed negative-bias-enhanced photo instability.

• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.307-312
• /
• 2008

In this study, a new cleaning process with a low cost of ownership (CoO) was developed with ozonated DI water ($DIO_3$). An ozone concentration of 40 ppm at room temperature was used to remove organic wax film and particles. Wax residues thicker than $200\;{\AA}$ remained after only a commercial dewaxer treatment. A $DIO_3$ treatment in place of a dewaxer showed a low removal rate on a thick wax layer of $8000\;{\AA}$ due to the diffusion-limited reaction of ozone. A dewaxer was combined with a $DIO_3$ rinse to reduce the wax removal time and remove wax residue completely. Replacing DI rinse with the $DIO_3$ rinse resulted in a surface with a contact angle of less than $5^{\circ}$, which indicates no further cleaning steps would be required. The particle removal efficiency (PRE) was further improved by combining a SC-1 cleaning step with the $DIO_3$ rinsing process. A reduction in the process time was obtained by introducing $DIO_3$ cleaning with a dewaxing process.