• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.1 s.28
• /
• pp.39-45
• /
• 2007

Recently it is a tendency that the heavy fuel oil is considered to be used on board even middle or small sized vessels in order to reduce the operating cost of vessel mused by a rise in international oil prices. In this study, analyzed the physical & chemical properties and examined the effect of refining treatment and a fuel oil additive for MF30 fuel oil which is a mixture fuel oil mixed M.G.O and the heavy oil MF380 use to be possible in the middle&small class vessel. As a results, the effects of two of pre-refinery treatment methods as centrifugal purifier and heating & homogenizing system(M.C.H) are some feeble, but the pour point and the flash point came to be low more or less. The effect of property improvement which is mused by the fuel oil additive did not appear positively.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.92-97
• /
• 2006

A study of the adsorption site of CO in the Ni(111)$(2\times2)$-O/CO coadsorbed phase over different sample preparation temperatures revealed that the atop site is favoured. The Ni-C spacing is given by $1.77\pm0.01\;{\AA}$. A study of the adsorption site of Co in the Ni(111)$(2\times2)$-O/CO coadsorbed phase over different sample preparation temperatures revealed that the atop site is favoured. The Ni-C spacing is given by $1.77\pm0.01\;{\AA}$. The data from the sample prepared at 265 K showed atop sites, which is well consistent with vibrational spectroscopy, whilst the data from the low temperature preparation appears the mixture of atop and hop $(35\%)$. The occupation of hop hollow sites is probably due to an incorrect pre-coverage of atomic oxygen (different from 0.25ml). Similar observation of site mixture also found in recent high resolution XPS measurements using C 1s and O 1s chemical shifts.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.1019-1029
• /
• 2016

The probability hypothesis density (PHD) filter is an effective means to track multiple targets in that it avoids explicit data associations between the measurements and targets. However, the target birth intensity as a prior is assumed to be known before tracking in a traditional target-tracking algorithm; otherwise, the performance of a conventional PHD filter will decline sharply. Aiming at this problem, a novel target birth intensity scheme and an improved measurement-driven scheme are incorporated into the PHD filter. The target birth intensity estimation scheme, composed of both PHD pre-filter technology and a target velocity extent method, is introduced to recursively estimate the target birth intensity by using the latest measurements at each time step. Second, based on the improved measurement-driven scheme, the measurement set at each time step is divided into the survival target measurement set, birth target measurement set, and clutter set, and meanwhile, the survival and birth target measurement sets are used to update the survival and birth targets, respectively. Lastly, a Gaussian mixture implementation of the PHD filter is presented under a linear Gaussian model assumption. The results of numerical experiments demonstrate that the proposed approach can achieve a better performance in tracking systems with an unknown newborn target intensity.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.59-68
• /
• 2017

This study has been conducted to evaluate the effects of a single stage anaerobic co-biogasification of food waste and primary sewage sludge mixture (1 : 5 V/V%) according to mixing ratio (0% : CAP0, 0.5% : CAP0.5, 1%: CAP1.0) in red pepper powder, which was reported as the material anti-bacterial and anti-fungi, under mesophilic condition ($35^{\circ}C$). during 31 days. It showed that red pepper powder effected anaerobic bacteria, Especially, Hydrolytic bacteria and methanogenic bacteria was inhibited much more than Acetogenic bacteria with red pepper powder. at CAP0, Experimental cumulative methane yield (ECMY) and Experimental bio-energy production (EBEP) were 0.17 L $CH_4/g$ $VS_{fed}$ and 1,465 cal/g $VS_{fed}$ individually as the highest value during 31 days.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.3
• /
• pp.11-19
• /
• 1988

The purpose of this study is to investigate ways to control the wind dispersal of contton-wrapped seeds of such poplars and willows as Poplus alba, P. tomentiglandulosa, P. euramericana, P. deltoides, and Salix pseudo-lasiogyne. These trees are hated by many people because of their seeds blowing all over the place during May. These cottony seeds can be nuisance to various types of outdoor activities, pose safely threat to drivers, become fire hazards during prolonged spring dry spells, and cause many types of health hazards of allergy such as sneezing. rhinitis, asthma, and skin rashes. Four control methods can be used to resolve the problem. First, pruning can be a solution, but it is unsatisfactory in terms of costs and outcome. Second, planting of male trees only can be a solution, but it is hard to identify sexes of saplings. Third, female trees can he replaced with other species. But it requires high costs and takes at least ten years to functionally replace the removed ones. As an alternative to such unsatisfactory control methods, the possibility of applying plant growth regulators has been investigated since 1983. During the pre-test, various concentrations and mixtures of them were either sprayed or injected, but failed to achieve any promising results. But the injection of a mixture made up of 0.75g of 2-chloroethane phosphonic acid with 0.2 mg of GA in 300cc water in the end of March produced premature falling of almost all aments and capsules of treated poplars and willows. It was found that the effect of the injection lasts two years. The results of the main experiment of 1987 can be summarized as follows ; First, the injection of the mixture of 2-chloroethane phosphonic acid and GA increases the premature abscisin of aments and capsules, thus reducing the wind dispersal of the cottony seeds of S. pseudolasiogyne, P. tomentiglandulosa, and P. euramericana 1644.09, 1200.61, and 1485.11 times, respectively, than that of the naural abscisin, It is estimated that the average number of wind-blown seeds reduced are approximatively 6,185,100, 4062,900, and 2,830,670 per tree, respectively. Second, the treatment causes no observable side effects on the growth of the samples tested.

• Journal of Plant Biotechnology
• /
• v.5 no.2
• /
• pp.83-86
• /
• 2003

A reverse transcription polymerase chain reaction (RT-PCR) protocol was developed using two specific 22-mer primers located in coat protein gene of SPFMV. A 411 bp PCR-product was detected in virus infected plants as well as tissue culture raised sweet potato but not in healthy plants. For optimization of RT-PCR protocol, the optimum crude nucleic acid concentration, annealing temperature, primer concentration and numbers of PCR-cycle for maximum sensitivity and specificity were determined. The optimum condition for RT-PCR was as follows: RT-PCR reaction mixture was one-step mixture, containing 50 pmol of primer, 30 units of reverse transcriptase, 5 units of RNasin, and the crude nucleic acid extracts (200 ng). In RT-PCR, cDNA was synthesized at $42^{\circ}C$ for 45 min before a quick incubation on ice after pre-denaturation at $95^{\circ}C$ for 5 min. The PCR reaction was carried out for 40 cycles at $96^{\circ}C$ for 30 see, $63^{\circ}C$ for 30 sec, $72^{\circ}C$ for 1 min, and finally at $72^{\circ}C$ for 10 min. The viral origin of the amplified product was confirmed by sequencing, with the sequence obtained having $95-98\%$ homology with published sequence data for SPFMV. The benefits of this RT-PCR based detection of SPFMV would be simple, rapid and specific.

• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.791-803
• /
• 2015

The effective cross sections (XSs) in the direct whole core calculation code nTRACER are evaluated by the equivalence theory-based resonance-integral-table method using the WIMS-based library as an alternative to the subgroup method. The background XSs, as well as the Dancoff correction factors, were evaluated by the enhanced neutron-current method. A method, with pointwise microscopic XSs on a union-lethargy grid, was used for the generation of resonance-interference factors (RIFs) for mixed resonant absorbers. This method was modified by the intermediate-resonance approximation by replacing the potential XSs for the non-absorbing moderator nuclides with the background XSs and neglecting the resonance-elastic scattering. The resonance-escape probability was implemented to incorporate the energy self-shielding effect in the spectrum. The XSs were improved using the proposed method as compared to the narrow resonance infinite massbased method. The RIFs were improved by 1% in $^{235}U$, 7% in $^{239}Pu$, and >2% in $^{240}Pu$. To account for thermal feedback, a new feature was incorporated with the interpolation of pre-generated RIFs at the multigroup level and the results compared with the conventional resonance-interference model. This method provided adequate results in terms of XSs and k-eff. The results were verified first by the comparison of RIFs with the exact RIFs, and then comparing the XSs with the McCARD calculations for the homogeneous configurations, with burned fuel containing a mixture of resonant nuclides at different burnups and temperatures. The RIFs and XSs for the mixture showed good agreement, which verified the accuracy of the RIF evaluation using the proposed method. The method was then verified by comparing the XSs for the virtual environment for reactor applicationbenchmark pin-cell problem, as well as the heterogeneous pin cell containing burned fuel with McCARD. The method works well for homogeneous, as well as heterogeneous configurations.

• Advances in environmental research
• /
• v.9 no.4
• /
• pp.275-284
• /
• 2020

We provide the first study on the occurrence of microplastics in Dal lake, Kashmir, India. Microplastics act as catastrophe that trigger many environmental problems. The key origins of microplastics are larger plastics, which split into smaller plastics after UV light disintegration. There is relatively little work carried out on the existence of microplastics. The present work has been undertaken on the occurrence of microplastics at four pre-selected sites (surface water) in Dal lake, Kashmir. The samples were taken to the laboratory to dissolve organic matter by using H2O2 (6%). To speed up the organic digestion; the treated mixture was heated on a hot plate at 70℃. The mixture was then subjected to density separation. The supernatant obtained was observed under the microscope (10X) and measurements were taken. At site-I, the microplastics ranged from 2-3 mm, site-II 5-6 mm, site-III 3-4 mm, site-IV 4-5 mm in thickness, indicating the presence of microplastics in the lake. The presence of microplastics indicated that the lake has undergone an anthropogenic change over a period of time. Our research highlights the value of enhancing the quality of the drainage system and sewage disposal. This work can be helpful to recognize successful microplastic control management techniques and possible threats associated with the Dal lake. So far, no such data on the presence of microplastics in Kashmir lakes is available.

• Korean Journal of Organic Agriculture
• /
• v.25 no.3
• /
• pp.631-642
• /
• 2017

For effective control of insect pest which can outbreak in a field during crop cultivation, various control agents such as eco-friendly agricultural materials (EFAM) including microbial control agents and chemical pesticides have been applied at fields and these control agents may be treated simultaneous or sequential in the same field to suppress diverse pests and diseases. The agents may influence each other and control efficacy may also differ from interactions. Therefore we need to test compatibility of microbial control agents with other agricultural agents. In this study, we investigated influence of pre-treated EFAMs, which are registered for whitefly control in greenhouse, on germination, mycelial growth and control efficacy of Isaria javanica isolate against sweet potato whitefly. The results showed that a mixture of paraffin oil+cinnamon oil among 4 EFAMs highly reduced germination ($8.9{\pm}1.3%{\sim}24.5{\pm}0.9%$) and mycelial growth ($0.81{\pm}0.01cm{\sim}0cm$) of I. javanica. To investigate the effects of the treatment interval between EFAMs and I. javanica on sweet potato whitefly control, four different EFAMs were pre-treated 0, 1, 4, and 7 days before applying I. javanica. Pre-treatment of four EFAMs inhibited insecticidal activity of I. javanica against sweet potato whitefly. Therefore when EFAMs and a mycopesticide using I. javanica spray simultaneous or sequential, application of EFAMs need more than 7 days interval after treatment of mycopesticide at field.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.2
• /
• pp.99-110
• /
• 1998

The effects of pre-heat treatment(Q/T) on microstructure and hardness of SCM435 structural steel nitrided by micro-pulse plasma was investigated. The quenching and tempering temperatures for obtaining matrix hardness of SCM435 steel on range of HRC30 to HRC40 desired for machine parts were about $860^{\circ}C$ and $500^{\circ}C$ respectively. The case depth of SCM435 nitrided at $480^{\circ}C$ for 5 hours was independent of pre-heat treatment condition and was approximately $150{\mu}m$. However, hardness and compactness of nitrified layer on Q/T treated specimen were more heigher than annealed specimen. The case depth increased linearly with the increase of nitriding temperature, however, the hardness of nitrified layer decreased with the temperature. Phase mixture of ${\gamma}^{\prime}$-phase($Fe_4N$) and ${\varepsilon}$-phase($Fe_3N$) were detected by XRD analysis in the nitrified layer formed at optimum nitriding condition, and only single ${\gamma}^{\prime}$-phase was detected in the nitrified layer formed at higher nitriding temperature such as $540^{\circ}C$. The optimum nitriding temperature was approximately $480^{\circ}C$ which is lower than tempering temperature for preventing softening behavior of SCM435 matrix during nitriding process and the surface hardness of nitrified layer obtained by optimum preheat treatment condition was about Hv930.