• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1161-1166
• /
• 2010

테이퍼롤러 베어링은 축하중과 반경방향 하중이 동시에 인가되는 회전기계의 핵심 부품으로, 자동차 입력축과 출력축의 지지 베어링 등에 주로 사용되고 있다. 특히, 변속기에 사용되는 테이퍼롤러 베어링의 경우 조립시에 축방향 과다 예압이 인가된 상태로 조립된 경우 베어링의 수명이 단축되는 결과를 가져올 수 있다. 본 연구에서는 테이퍼롤러 베어링의 축방향 과다 예압에 의한 수명 단축 효과를 실험적으로 검증하고 그 결과에 의한 베어링의 수명 분포를 분석하였다. 또한, 기존의 $L_{10}$ 수명식에 비하여 현장 작동 조건에 따른 실질적인 수명을 산출할 수 있는 축방향과 반경방향을 고려한 수명식을 도출하고 이를 프로그램화 하여 설계 및 생산 현장에서 용이하게 활용할 수 있도록 하였다.

• 대한토목학회논문집
• /
• 제42권6호
• /
• pp.825-836
• /
• 2022

건물이나 구조물 증축 시 사용되는 마이크로파일은 추가하중의 일부만을 지지하여 기존 말뚝의 경우 허용지지력을 초과하는 문제가 발생할 수 있다. 본 논문에서는 건물의 하중을 마이크로파일에 분배하고자 선압축 공법을 적용하였고, 정착성능을 개선한 웨지형 정착장치의 적용성을 확인하고자 실내재하시험을 수행하였다. 시험결과, 정착장치의 최대변형률은 항복변형률의 0.63배였고, 웨지와 콘크리트 사이 슬립발생량은 0.11 mm로 구조적인 기준을 만족하였다. 또한, 지반범용 해석프로그램인 MIDAS GTS를 활용하여 선행 압축하중, 토사층 두께, 선단 지반조건이 기존 말뚝과 마이크로파일의 반력에 미치는 영향을 분석하였다. 해석결과, 선압축 하중의 크기가 증가할수록 기존말뚝의 반력이 감소하여 최대 36 %의 저감효과를 보였다. 토사층 두께가 5 m 증가됨에 따라 반력저감률은 4 % 감소하였고, 마이크로파일의 선단이 풍화암에 놓일 경우 풍화토와 비교하여 반력저감율이 14 % 증가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.144-145
• /
• 2021

This study analyzed the cases of cracks in piles due to the use of followers under construction conditions where water exists inside the piles, and confirmed whether the piles were cracked through a field test simulating the construction conditions in which water pressure inside the piles was generated by a hammer. According to the construction case, under the construction condition where the pile length is 20% to 30% shorter than the drilled length, about 80% cracks occur, so there is a high possibility of cracking due to water inside the pile. A field test was conducted to confirm the type of pile failure due to hammer under the construction condition in which water exists inside the pile. The pile head was not destroyed by the compressive load, and one or more longitudinal cracks occurred along the PC steel wire. The closed end pile generates water pressure by hammer. the follower and cushion(compression plywood) must be drilled at least 0.4D. It is expected that improved quality control will be possible as the water pressure inside the pile is reduced.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.128-134
• /
• 2009

This paper aims to design a variable-stiffness type economical safety joint for service robots. The safety joint was designed to have a passive shock absorbing mechanism for protecting human from a catastrophic collision under service condition of robots. A simple mechanism composed of two action disks for switching the load transfer, a spring and a screw for pre-load was proposed. In order to evaluate the performance of the safety joint a testing platform which can carry out the static and impact tests was also designed and fabricated. From the test results, the designed safety joint was proved to have a variable load-carrying capacity and about 42% impact absorption capacity with simple manipulation of the control screw.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.257-262
• /
• 2009

Capacitor is basically used for the power-factor compensation and sometimes as the passive filter to reduce harmonics of nonlinear load. Since the impedance of capacitor is inversely proportional to the frequency. The harmonic current may result in the problems of voltage distortion and resonance. Capacitor has easily fall under by two harmonic components, a nonlinear load and a distorted utility voltage. The amplified harmonic current and voltage may damage power capacitor. Hence the pre-investigation of harmonic is needed before designing and application the power factor for reducing fault rate. In this paper, we analyzed that voltage and current with harmonics components act on the capacitor under the resonance condition. we concluded that both voltage and current harmonics have an bad effect on the capacitor and current harmonics is a bitter rather than effect by voltage harmonics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.411-413
• /
• 2005

Static approaches usually employed in voltage stability analysis are based on the pre-determined scenarios of varying load and generation patterns. Thus, even though the approaches are applied to the same system condition, one may obtain different voltage instability phenomena using different scenarios. In the stage of concrete control strategy determination against voltage instability, dynamic approaches with full-time and/or quasi steady-state simulations need to be applied in order to confirm the effectiveness of the established control strategies. This paper describes the ULTC and dynamic load models, and discusses characteristics of the models.

• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.33-37
• /
• 2004

Since the preflex beam is fabricated by welding, the pre-compressive stresses that should occur over the concrete pier are diminished by the welding residual stresses. For this reason distribution of welding residual stresses must be analyzed accurately and welding residual stresses should be relieved during the fabrication. In this study strain history, displacement of beam and re-distributed welding residual stresses by different loading conditions are measured and compared to choose more appropriate preflex condition.

• 한국환경과학회지
• /
• 제13권9호
• /
• pp.779-878
• /
• 2004

This study was conducted to analyze the operating conditions of predenitrification process to improve the treatment efficiency in low organic loading sewage plant in use today, and to investigate the treatment efficiency of pilot plant added night soil as well as the nitrogen removal characteristics of pilot plant added carbon sources. In the operation under the condition of $BOD_{5}$ sludge load 0.03-0.28kg $BOD_{5}$/kg VSS/d and oxic ammoniac nitrogen sludge load 0.02-0.24 $kgNH_{4}^{+}$-N/kg MLVSS/d, nitrification efficiency is higher than 95%. In order to achieve 70% nitrogen removal at the T-N sludge loading 0.06kg T-N/kg VSSㆍd and the SRT 6～11 days, optimum operating factors were revealed to $CODc_{r}$/T-N ratio 9, recycle ratio 2.6, and denitrification volume ratio 0.33. At this time, denitrification capacity was approximately 0.09 kg $NO_{3}^{-}$-N/kg $CODc_{r}$; specific nitrification rate was 3.4mg $NH_{4}^{+}$-N/g MLVSS/hr; and specific denitrification rate was 4.8mg $NO_{3}^{-}$-N/g MLVSS/hr.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.133-134
• /
• 2020

The equation of end bearing capacity is applied differently depending on the type of pile, construction method, and load characteristics considering the construction standards. The bearing capacity equation of the design standard is presented in various ways according to the design conditions such as construction method and ground condition, etc. but, It does not reflect the ground strength according to the SPT-N value of weathered rock. This study analyzed the trend of allowable tip bearing capacity by pile diameter through about 480 dynamic loading tests conducted for the construction/quality management of piles for the last 6 years since 2015. The equation for the ultimate end bearing capacity per unit area according to the SPT-N value is presented. The proposed formula of ultimate end bearing capacity per unit area can be applied in the range of 15,000kN/m2 to 30,000kN/m2. The proposed formula, which complements the existing formula, enables pile design and construction/quality management.

• Journal of Information Processing Systems
• /
• 제14권3호
• /
• pp.569-589
• /
• 2018

Cloud computing, also known as "country as you go", is used to turn any computer into a dematerialized architecture in which users can access different services. In addition to the daily evolution of stakeholders' number and beneficiaries, the imbalance between the virtual machines of data centers in a cloud environment impacts the performance as it decreases the hardware resources and the software's profitability. Our axis of research is the load balancing between a data center's virtual machines. It is used for reducing the degree of load imbalance between those machines in order to solve the problems caused by this technological evolution and ensure a greater quality of service. Our article focuses on two main phases: the pre-classification of tasks, according to the requested resources; and the classification of tasks into levels ('odd levels' or 'even levels') in ascending order based on the meta-heuristic "Bat-algorithm". The task allocation is based on levels provided by the bat-algorithm and through our mathematical functions, and we will divide our system into a number of virtual machines with nearly equal performance. Otherwise, we suggest different classes of virtual machines, but the condition is that each class should contain machines with similar characteristics compared to the existing binary search scheme.