• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.191-197
• /
• 2014

To increase the heat transfer rate of the air pre-heating heat exchanger used for the condensing boiler, We investigated condensation heat transfer coefficients through plasma surface treatment. The hydrophilic surface showed about 10% increase in heat transfer rate than original plate. It shows that Shah correlation can be used to predict the condensation heat transfer coefficient on the original surface within 10% error range after the compatison between Shah correlation and the condensation heat transfer coefficients measured on the hydrophilic surface and original surface. Therefore, we have shown that Shah correlation is available when designing the air pre-heating heat exchanger using the original surface in this study.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.110-114
• /
• 2004

The optimized RAPD-PCR conditions, that can be utilized as a basic information for analysis of the gelletic characteristics were developed for genetic analysis of four mulberry varieties, named Milsung, Chungil, Suil, and Hansung using a primer, OPY15 (5'-AGTCGCCCTT-3') from Operon company. We tested several different factors for best PCR condition including concentrations of DNA, primer, Mgclu annealing temperature, number of PCR cycle, and prosence/absence of pre-heating time at the begining of PCR reaction in the $25 \mul$volume. The best RAPD profiles were obtained using 50 ng of DNA, 1 $\mu$M of primer, $1 \mum$of $MgCl_2\;,45^{\circ}C$ of annealing temperature and an absence of pre-heating time. An establishment of the stable and reproducible RAPD-PCR conditions are expected to be useful for the subsequent RAPD-related investigation, such as genetic characterization of the mulberry varieties, re-establishment of phylogenetic relationships and development of new varieties.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.4
• /
• pp.52-57
• /
• 2020

The frequency of the manufacturing and modification of automotive press dies via overlay welding has recently increased, but the welding quality depends on the operator skills and the working conditions. Therefore, this study presents a way to improve the overlay welding quality regardless of the operator skills. Three welding conditions with different pre- and post-heating treatments were tested on some specimens; the weld surface quality was analyzed by examining the cutting face. The results demonstrated the best quality of the weld surface that was heated before and after the welding.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1829-1836
• /
• 2010

The district heating system distributes the heat generated from a cogeneration plant to wider locations. In this process, the district heating pipe (DHP) is subjected to internal and external loadings. The internal loadings are generally caused by the operating conditions such as water temperature and internal pressure. Frictional interactions between the pipes and the soil contribute to the external loadings. Thus, investigation of the mechanisms of failure of DHPs will help to guarantee both mechanical stability and heating efficiency. In this study, we investigate the local buckling of DHPs using limit state design (LSD). Two methods are considered: the use of the limit state for the width-thickness ratio and the use of the limit state for the strain. The results are used to confirm that the DHP is stable under local buckling. Finally, we suggest a minimum preheating temperature for avoiding local buckling.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.354-354
• /
• 2011

ZnO 나노와이어는 밴드 갭이 3.37 ev로 큰 밴드 갭을 갖는 물질이며 엑시톤 결합에너지가 60 meV로 GaN(25 meV)같은 다른 반도체보다 매우 크다. 또한 밴드갭 에너지가 큰 GaN, SiC와 같은 반도체에 비해서 화학적, 열적 안정성이 크며 낮은 온도에서 성장이 가능하다는 장점이 있다. 본 연구에서는 pre-heating process를 이용하여 1차원 구조인 ZnO nanowire를 수열합성법으로 합성하였다. 실험방법으로는 E2K glass 기판위에 AZO40 nm를 증착후, 시드층으로 이용하여 ZnO nanowire를 성장하였다. precusor 전구체에는 ZN(NO3)2 ${\cdot}$ 6H2O와 Capping agent으로의 역할을 위해 PEI와 OH-source 공급을 위한 Ammonium chloride를 첨가하여 합성하였고, 그에 따른 ZnO nanowire의 morphology 및 aspect ratio를 조절하고자 하였다. 마지막으로 ZnO 나노와이어의 구조적, 광학적 특성 평가를 하기위해 XRD, FE-SEM, PL 등을 이용하여 측정 하였고, 향후 나노발전기, 태양전지 등 여러 광학기기 등에 전극재료로서 응용 가능성에 대해 알아보고자 하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.543-547
• /
• 2008

In the paper, we develop the ultrasonic bonding technique for LCD driver chips having small size and high pin-density. In general, the mounting technology for LCD driver ICs is a thermo-compression method utilizing the ACF (An-isotropic Conductive Film). The major drawback of the conventional approach is the long process time. It will be shown that the conventional ACF method based on thermo-compression can be remarkably enhanced by employing the ultrasonic bonding technique in terms of bonding time. The proposed approach is to apply the ultrasonic energy together with the thermo-compression methodology for the ACF bonding process. To this end, we design a bonding head that enables pre-heating, pressure and ultrasonic excitation. Through the bonding experiments mainly with LCD driver ICs, we present the procedures to select the best combination of process parameters with analysis. We investigate the effects of bonding pressure, bonding time, pre-heating temperature before bonding, and the power level of ultrasonic energy. The addition of ultrasonic excitation to the thermo-compression method reduces the pre-heating temperature and the bonding process time while keeping the quality bonding between the LCD pad and the driver IC. The proposed concept will be verified and demonstrated with experimental results.

• Corrosion Science and Technology
• /
• v.20 no.2
• /
• pp.69-76
• /
• 2021

In this work, we have performed a corrosion failure analysis of a leaking tube connected to an upper header of a condensate pre-heater in a heat recovery steam generator. It was revealed that the leakage position in the tube was the location where the materials were easily vulnerable due to tensile residual stresses induced by the material manufacturing process and welding process. In addition to an imbalance in the module induced by temperature difference during operation of the pre-heater, the weight of the modules and thermal fatigue provoked a type of stress of tensile-tensile fatigue on the tube. Thus, the leakage position of the pre-heater was exposed to the tensile stress on the inner surface of the tube facing the gas, which rendered the unstable oxide layer susceptible to corrosion and the formation of pits on the water side. The cracks propagated along with the degraded microstructure in a transgranular cracking mode under fatigue loading and finally resulted in water leakage.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.237-238
• /
• 2012

Recently, an energy-saving due to the energy utilisation efficiency enhancement is important. In order to improve the heat efficiency of the general residential boiler, We performed an experiment of condensation heat transfer to air pre-heat exchanger adhered to the condensing boiler. In this research, We analyze the heat transfer performance through the hydrophilic surface treatment(plasma, etching). The results of the research, On plasma and etching treated surface, Overall heat transfer coefficient is displayed the tendency to increase.

• Preventive Nutrition and Food Science
• /
• v.21 no.4
• /
• pp.338-347
• /
• 2016

The present study investigated the volatile compound, physicochemical, and antioxidant properties of beany flavor-removed soy protein isolate (SPI) hydrolyzates produced by combined high temperature pre-treatment and enzymatic hydrolysis. Without remarkable changes in amino acid composition, reductions of residual lipoxygenase activity and beany flavor-causing volatile compounds such as hexanol, hexanal, and pentanol in SPI were observed after combined heating and enzymatic treatments. The degree of hydrolysis, emulsion capacity and stability, 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity, and superoxide radical scavenging activity of SPI were significantly increased, but the magnitudes of apparent viscosity, consistency index, and dynamic moduli (G', G") of SPI were significantly decreased after the combined heating and enzymatic treatments. Based on these results, it was suggested that the enzymatic hydrolysis in combination with high temperature pre-treatment may allow for the production of beany flavor-removed SPI hydrolyzates with superior emulsifying and antioxidant functionalities.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.224-224
• /
• 2004