• 펄프종이기술
• /
• 제44권5호
• /
• pp.32-38
• /
• 2012

This study was carried out to elucidate the potential in substitution of SB latex with eco-friendly starch based bio-binder as a coating binder. The part of SB latex in coating color of pre- and top layer was substituted with starch based bio-binder in order to evaluate the characteristics of coating color and coated paper, and printability. The viscosity and water retention of coating color were increased by substitution of SB latex with starch based bio-binder. Roughness of coated paper was increased by substitution with starch based bio-binder, although there was not significant changes in roughness when SB latex is used as a binder in pre-coating color. Brightness and whiteness of coated paper were not affected, but opacity and print mottle were improved by substitution with starch based bio-binder. The interesting result observed was that dry-pick did not affected significantly, and ink set-off was improved by starch based bio-binder. It is expected that starch based bio-binder can be commercialized if the systematic further research works are carried out.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1887-1889
• /
• 2002

One of the most frequent sources of the accident is metal contaminant in GIS. This paper deals with the characteristics of breakdown voltage of metallic particles using electrodes of various epoxy coating thickness. As experimental results, breakdown voltage of the thickly coated electrode is higher than that of thinly coated electrode. It is considered that resistance of the epoxy coating impedes the development of pre-discharges in the gas.

• 한국산림과학회지
• /
• 제109권1호
• /
• pp.41-49
• /
• 2020

본 연구는 벌개미취 종자의 대면적 파종 효율성을 증진시키기 위하여, 적절한 종자 전처리 조건과 펠렛코팅 소재를 선정하고자 실시하였다. 벌개미취 종자는 충실종자를 사용하기 위해 1일간 침지처리 후 침강 종자만을 사용하였다. 종자 전처리는 GA₃(200, 500 ppm), 24-epibrassinolide(10^-6, 10^-7, 10^-8 M) 호르몬 처리와 염류삼투프라이밍(100 mM KNO₃) 처리로 구분하였다. 펠렛코팅은 무처리와 프라이밍 처리 종자에 피복물질(DTCS와 DTK)과 접착제(PVA와 CMC)를 적용하여 제작하였다. 종자들은 필터페이퍼, 상토, 사양토 환경에서 파종하여 파종상에 따른 종자 처리 효과를 비교하였다. 필터페이퍼에 파종한 종자의 발아율은 무처리 종자가 41%, 프라이밍 종자가 65%로 가장 높았으며, 호르몬 처리 간 차이는 없었다. 프라이밍과 DTCS/PVA 펠렛 혼용 종자의 발아율은 71%로 가장 높았으며, 프라이밍과 DTK/CMC 펠렛 혼용 종자의 발아율은 42%로 가장 낮았다. 프라이밍 처리 후 펠렛코팅한 종자는 무처리 펠렛코팅 종자보다 발아율, 평균발아일수, 발아속도가 향상되었다. 온실의 상토에 파종한 프라이밍 종자의 발아율은 58%로 가장 높았으며, 평균발아일수는 9.4일, 발아속도는 7.0%·day로 27% 발아율의 무처리 종자보다 높았다. 또한 DTK/PVA 코팅 종자의 발아율(40%)은 무처리 종자의 발아율(27%) 보다 높았으며, 무처리 펠렛코팅한 종자의 평균발아일수는 15.0-27.0일로 프라이밍 처리 후 펠렛코팅한 종자보다 길었다. 온실의 사양토에 파종한 무처리 펠렛코팅 종자와 프라이밍 처리 후 펠렛코팅한 종자의 발아율은 모두 1-39%의 범위로 무처리 종자보다 낮았다. 펠렛 소재인 DTK는 DTCS보다 높은 발아율을 보였으며, 무처리 펠렛코팅 종자의 평균발아일수는 15.0-19.8일로 프라이밍 후 펠렛코팅한 종자보다 느렸다. 본 연구 결과를 기준으로, 벌개미취 종자의 프라이밍 전 처리는 유묘 출현율에 매우 효과적이며, 프라이밍과 펠렛코팅을 병행할 경우, 펠렛 소재로는 DTK가 더 적합하였고, 접착제는 PVA와 CMC 간 차이가 크지 않기 때문에 모두 사용이 가능한 것으로 판단되었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.118-125
• /
• 2000

Gloss uniformity on unprinted coated papers is oftenly called as 'Surface Feeling' in market and roles as a very important criteria when a customer choose a paper. However, there is few researches on this quality so far and even there isn't much knowledge on the characteristics of gloss variation, ie what it is, where it comes from etc. Therefore, there should be a pre-research on its characteristics, factors, measuring method or tools prior to the following development activities. In this paper, we obtained about a dozen of papers including foreign products and measured not only basic properties of them, but also various characteristics related to ununiformity. Our experiments went further to printing, but that area is excluded in this paper. Also, we investigated several instruments for measuring gloss variation by an objective way all over the world and tested with our own samples so that we tried to find out which one is best-correlated with visual appreciation and suggest its results as possible. We found out several things from these experiments including what is difference between good and bad gloss uniformity, the factors of gloss variation, and the results of measurement for gloss variation with instruments.

• 기술사
• /
• 제34권5호
• /
• pp.29-33
• /
• 2001

This paper summarizes the design and construction of the roof canopy structure for the SEOUL 2002 World Cup Main Stadium with a design inspired by Korean traditional beauty emphasizing images of the Pangpae kite. The stadium has also been designed for maximization of its post-World Cup utility to be used on as every basis by the citizens. The stadium canopy is a unique spatial network of truss members with a tensile membrane roof suspended from 16 masts. The canopy covers 40,950 ㎡. which is clad with a pre-stressed tensile membrane of PTFE coated fiberglass fabric and the glass.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 춘계학술발표논문집
• /
• pp.124-131
• /
• 2006

It is well known that smoother surface in substrate for coating or converting can obtain better results. Generally paper substrate is taking machine calendar process in papermaking system to give more uniformity and to get better coating runnability. This paper was prepared to find better idea for obtaining smoother surface after precalendering precoated paper as a substrate of double coating system. It was shown precalendering had effect on roughness improvement for precoating layer but was difficult to say it was effected to supercalendering results for double coating. The porosity and ink evaluation with precalendered double coated paper is needed to identify more essential clue for precalendering effect.

• 보존과학회지
• /
• 제37권6호
• /
• pp.723-737
• /
• 2021

본 연구에서는 17세기 '숨 톨고이(Sum tolgoi)' 건축 유적지에서 출토된 지류 경전을 대상으로 재질의 성분 및 구조에 대해 분석하고 이를 바탕으로 보존처리를 진행하였다. 경전은 흙먼지와 이물질이 많고 형태를 알 수 없을 정도로 뭉쳐 있는 상태로 훼손, 결실, 변색 등이 확인되었다. 티베트어로 쓰인 경전은 UV-Vis 분석 결과 쪽과 먹을 종이 바탕에 사용한 것으로, 고대 몽골어 경전은 흑색의 필사 재료가 먹으로 추정되었다. SEM-EDS와 Micro-XRF 분석 결과를 통해 연단(Pb₃O₄)과 진사(HgS) 혼합 또는 진사(HgS)로 적색 외곽선을 긋고 은니로 경전의 내용을 적었음이 확인되었다. 글씨의 은니는 칼슘과 함께 염화은(AgCl)이 확인되었으며, 황색선에서는 칼슘(Ca)과 석황(As₂S₃)이 확인되었다. 고대 몽골어 경전의 종이는 초본류 섬유와 인피섬유가 혼합된 특징을, 티베트어 경전은 인피섬유의 특징을 나타냈다. 방사성 탄소동위원소 연대측정 결과, 경전의 바탕으로 사용된 종이가 15-17세기에 제작된 것으로 분석되었다. 경전의 보존처리는 출토된 종이의 형태 변형과 취약함으로 인한 2차 손상을 예방하기 위해 보강지(Pre-coated paper) 제작 및 보강 방법에 대한 실험을 바탕으로 진행하였으며, 처리 후 경전의 보관 및 앞·뒤로 기록된 경전 내용을 확인할 수 있도록 마운팅하고 중성지로 상자를 제작하였다. 이번 보존처리는 보존처리 가역성의 원칙에 따른 새로운 보존처리 재료와 방법을 적용한 연구 결과이다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1285-1285
• /
• 2001

For NIR measurements of papers normally diffuse reflectance accessories are used which can provide a large sampling area. The in-line process control FT-NIR spectrometer MATRIX-E enables the contactless measurement of paper samples of low silicone coat weights on label-stocks in a paper converting factory. For this study concentrations of silicone between 0 and 2 g/$m^2$ on various paper substrates were included in a quantitative method. The aim was to achieve an absolute value for the deviation from the target value of 1 g/$m^2$ during continuous movement of the paper with velocities around 400 numinute. Influences from the uncoated paper type due to supplier, color, opacity, area densities, pre-coating as well as different compounds of the agent silicone were investigated and it was found that all these papers can be represented in one PLS-model. Especially the fact that silicone as an element is present in clay coated papers is of no consequence to the measurements with MATRIX-E. Moreover during in-line installations the variation of the moisture contents in the moving paper due to variable machine velocities as well as the reflecting material of the cylinder have to be considered. It is shown that the result of the in-line calibration has the same prediction ability compared to lab scale results(Root Mean Square Error of Cross-Validation RMSECV = 0.034 g/$m^2$).

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1193-1193
• /
• 2001

For NIR measurements of papers normally diffuse reflectance accessories are used which can provide a large sampling area. The in-line process control FT-NIR spectrometer MATRIX-E enables the contactless measurement of paper samples of low silicone coat weights on label-stocks in a paper converting factory. For this study concentrations of silicone between 0 and 2 g/㎡ on various paper substrates were included in a quantitative method. The aim was to achieve an absolute value for the deviation from the target value of 1 g/㎡ during continuous movement of the paper with velocities around 400 m/minute. Influences from the uncoated paper type due to supplier, color, opacity, area densities, pre-coating as well as different compounds of the agent silicone were investigated and it was found that all these papers can be represented in one PLS-model. Especially the fact that silicone as an element is present in clay coated papers is of no consequence to the measurements with MATRIX-E. Moreover during in-line installations the variation of the moisture contents in the moving paper due to variable machine velocities as well as the reflecting material of the cylinder have to be considered. It is shown that the result of the in-line calibration has the same prediction ability compared to lab scale results (Root Mean Square Error of Cross-Validation RMSECV = 0.034 g/㎡).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1719-1721
• /
• 1996

This paper describes the thermally stimulated current(TSC) of PAAS spin coated film and the electrical properties of pre TSC measurement and after TSC test specimens. The TSC measurement were performed from room temperature to about $280^{\circ}C$ and the temperature was increased by $5^{\circ}C/min$ automatically. It shows that two peaks of TSC are observed at about $50^{\circ}C$ and about $160^{\circ}C$. Result of this measurement indicate that one peak; $50^{\circ}C$ is from alkyl group; other peak at $160^{\circ}C$ is due to alkyl and C-O group of PAAS. Addition to larger peak at about $160^{\circ}C$ is due to dipolemoment of PAAS film. This result is proved by DSC measurement of PAAS film. The electrical properties of pre and after TSC were measured by currant-voltage(l-V) characteristics. The current-voltage characteristics after TSC specimens are increased the conductivity. The electrical properties of pre-after TSC measurement specimen is in the middle of imidization of PAAS. Because of this result a thermal imidization was performed at $300^{\circ}C$ for 1 hour.