• Physical Therapy Korea
• /
• v.13 no.4
• /
• pp.10-15
• /
• 2006

This study examined the ability of human subjects to match a force in their quadriceps muscle during fatigue. Twenty subjects (mean age: 23.4 yrs, mean height: 167.8 cm, mean weight, 62.6 kg) were enrolled in the experiment. In the force-matching task, the quadriceps muscle generated 50% of the MVIC (maximum voluntary isometric contraction) torque under visual control and then without visual feedback. After inducing fatigue in the quadriceps muscle, the subjects were required to match 50% of the MVIC torque without visual feedback. The perceived magnitude of the force and force-matching errors were measured. 50% of the MVIC torque was perceived from 39.96 Nm in the pre-fatigue condition to 44.95 Nm in the post-fatigue condition. 50% of the MVIC torque-matching errors increased significantly from .55% in the pre-fatigue condition to 9.6% in the post-fatigue condition (p<.001). in addition, there were significantly more force-matching errors in women than in men (p<.01). In conclusion muscle fatigue can interfere with a subject's ability to match a force. This suggests that muscle fatigue may contributes to the sensitization of the proprioception.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1419-1427
• /
• 2007

In this paper, we propose an algorithm which implements a multi-sided side match finite-state vector quantization(MSMVQ). After extracting the edge information from an image and classifying the image into edge blocks or non-edge blocks, we construct an edge map. We subdivide edge blocks into sixteen classes using discrete cosine transform(DCT) AC coefficients. Based on edge map information, a state codebook is made from the master codebook, and side match calculation is done for two-sided or three-sided current block of image. For reducing transmitted bits, a decision is made whether or not to encode the non-edge blocks among the pre-coded blocks by using the master codebook. Also for reducing allocation bits of codeword indices to decoder, a variable length coder is used. Considering the comparison with side match finite-state vector quantization(SMVQ) and two-sided SMVQ(TSMVQ) algorithm about Zelda, Lenna, Bridge and Peppers image, the new algorithm shows better picture quality than SMVQ and TSMVQ respectively.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.1
• /
• pp.7-22
• /
• 2021

Purpose: This study aimed to identify the differences in pre-hospital and in-hospital triage (pre-hospital triage and KTAS(Korean Triage and Acuity Scale)) of patients with abdominal pain and the characteristics of high hospitalization probability in the treatment results. Methods: We analyzed 941 people who visited the area C emergency center for 2 years from January 2017 to December 2018. The collected data were analyzed using SPSS 26. Results: Among the transfer hospitals, 84.8% (798) of patients were selected by the 119 rescue service, and the most common diagnosis was simple abdominal pain (46.5%, 438 patients). A total of 50.7% (477) of patients classified as severe pre-hospital cases changed to mild in-hospital cases. There was a difference of 5.3% (50 cases) in cases where patients classified as mild pre-hospital were changed to severe in-hospital cases. The Kappa coefficient did not match with 0.04 (p=.051). Pre-hospital overtriage was 58.2% (548 cases), and 71.2% (670) of patients were discharged from the emergency room as a result of the treatment. Conclusion: The results of this study showed that pre-hospital and in-hospital triage were not consistent. The rates of pre-hospital overtriage were quite high. Most patients with abdominal pain were classified as mild cases, and pre-hospital triage classifiers should be trained to reduce errors in selecting transfer hospitals.

• Proceedings of the KACD Conference
• /
• 2004.05a
• /
• pp.304-308
• /
• 2004

Maxillary anterior crown fractures are a common form of injury that mainly affects children and adolescents. The position of maxillary incisors and their eruptive pattern carries a significant risk for trauma. In the pre-adhesive era, fractured teeth needed to be restored either with pin-retained inlays or cast restorations that sacrificed healthy tooth structure and were a challenge for dentists to match with adjacent teeth. But. recently the development of adhesive dentistry has allowed dentists to use the patient's own fragment to restore the fractured tooth. The purpose of this paper is to present 2 cases of reattachment of fractured teeth which had different fracture mode, and to evaluate prognosis of cases.

• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.80-86
• /
• 2009

The Cu-bearing PFS-700 steel which has yield strength over 700 MPa was developed to replace the existing submarine structural material, HY-100. The PFS-700 steel has a combination of good mechanical properties and superior weldability. Becaus of that, it can be welded without pre-heating. The application of PFS-700 steel to submarine or battle ship will give a great reduction of cost by omitting pre-heating or lowering pre-heat temperature. To develop pre-heating free welding consumables that match and take advantage of PFS-700 steel, new welding consumables have been designed for the GMAW, SAW processes and explosion bulge test(EBT) was conducted to see the reliability of welded structure. All welds were made without pre-heating, and the inter-pass temperature was below $50^{\circ}C$ for SAW50 and $150^{\circ}C$ for GMAW and SAW150. All EBT specimens show over 14% thickness reduction without through-thickness crack or crack propagation to the hole-down area. Tensile properties for all welding conditions show higher(GMAW) or similar values(SAW50, SAW150) to the base metal. Charpy impact values for the weld metal also show 163.5J(GMAW), 95.4J(SAW50) and 69.0J(SAW150), which meet the goal(higher than 50J) of this project.

• Journal of Korean Elementary Science Education
• /
• v.36 no.3
• /
• pp.219-226
• /
• 2017

In this study, the reliability and validity of the retrospective pre-post test were analyzed in order to solve the problem of traditional pre-post test including response shift bias. Samples of the study were 162 elementary school students who are studying at the S university gifted education center in Seoul. Before completion of the field trip, we conducted pre test of science-related attitudes. After completion of the field trip, respondents were asked to compare their responses of pre and post science-related attitudes to quantitatively analyze the commonalities and differences of the two tests. To find out more characteristics, qualitative data such as daily records and interview were also gathered and analyzed. The major results of the study are as follows. First, for the paired t-test, there was no statistically significant difference between separate pre-test scores and retrospective pre-test. There was a very high correlation between the separate pre-test scores and the retrospective pre-test. Second, there were significant differences in all seven sub-factors of science-related attitudes between the retrospective pre-test and the post-test. Third, the separate pre-test scores showed a slightly higher tendency than the retrospective pre-test scores. This suggests that the response shift bias appears when it is performed the separate pre-test in affective domain. As a result of the interview, it was found that the evaluation standards of separate pre-test did not match with those of post-test. Forth, internal consistency reliability of the retrospective pre-test was higher than that of the separate pre-test. However, there were significant differences in six factors of science-related attitudes excluding the 'social implications of science' between the separate pre-test and the post-test. Based on these results, the retrospective pre-post test design provides simplicity and convenience to both respondents and investigators, as it is done with one test. The retrospective pre-post test design can be regarded as a valid design for the self-report measurement of affective domain on a single experimental group.

• Journal of Korean Academy of Nursing
• /
• v.36 no.5
• /
• pp.732-741
• /
• 2006

Purpose: This study was to investigate the effects of non-nutritive sucking on physiological and behavioral state of pre-term infants during tube feeding. Method: This nonequivalent, non-synchronized experimental study included 50 pre-term infants. An attempt was made to match gestational age and birth weight of infants in each group. Infants in the experimental group were given a pacifier 2 minutes before, during, and for 2 minutes after tube feeding. Infants in the control group did not get a pacifier. Both groups were tested at three stages for changes in the physiologic state and behavioral state - 2 minutes before, during, and 2 minutes after feeding. Date was analyzed with SPSS WIN 10.0 using an $X^2$-test, t-test, and repeated measures ANOVA. Result: Heart rates and oxygen saturation levels of the two groups were significantly different(P=.001, P=.000). The behavioral states of the two groups were significantly different during and post feeding(P=.000, P=.000). Conclusion: This result suggests non-nutritive sucking by using a pacifier is an effective intervention for pre-term infants during tube feeding.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.351-362
• /
• 2009

The Soil and Water Assessment Tool (SWAT) model, semi-distributed model, first divides the watershed into multiple subwatersheds, and then extracts the basic computation element, called the Hydrologic Response Unit (HRU). In the process of HRU generation, the spatial information of land use and soil maps within each subwatershed is lost. The SWAT model estimates the HRU topographic data based on the average slope of each subwatershed, and then use this topographic datum for all HRUs within the subwatershed. To improve the SWAT capabilities for various watershed scenarios, the Spatially Distributed-HRU (SD-HRU) pre-processor module was developed in this study to simulate site-specific topographic data. The SD-HRU was applied to the Hae-an watershed, where field slope lengths and slopes are measured for all agricultural fields. The analysis revealed that the SD-HRU pre-processor module needs to be applied in SWAT sediment simulation for accurate analysis of soil erosion and sediment behaviors. If the SD-HRU pre-processor module is not applied in SWAT runs, the other SWAT factors may be over or under estimated, resulting in errors in physical and empirical computation modules although the SWAT estimated flow and sediment values match the measured data reasonably well.

• Journal of The Korean Association For Science Education
• /
• v.41 no.4
• /
• pp.325-338
• /
• 2021

In this study, we developed a 15-week educational program for TPACK(Technological Pedagogical Content Knowledge) development of 40 pre-service teachers in a university for teacher training. We also developed a TPACK evaluation framework to evaluate the practical competency of TPACK of pre-service teachers. The developed evaluation framework consisted of 5 levels, from 0 to 4, TPK(Technological Pedagogical Knowledge), TCK(Technological Content Knowledge), and TPACK, respectively. As a result of the evlauation, the levels of TPK, TCK, and TPACK development stages of most pre-service teachers were consistent, but some pre-service teachers' TPK and TCK did not match. It was found that the TPACK stages follow the lower level between TPK and TCK. In addition, as a result of an investigation into the hindrance factors of the TPACK development of pre-service teachers with low TPACK stages in the use of technology, they have distrust of students' ability to learn with self-regulation, distrust of students' ability to interact, and recognition of practical limitations in the school field. Based on these findings, we argued that it was necessary to provide an educational program to help pre-service teachers develop balanced TPK and TCK and eliminate the hindrance factors of the TPACK development of pre-service teachers about technology-using classes.

• Journal of KIISE
• /
• v.44 no.2
• /
• pp.171-178
• /
• 2017

In this study, we propose an automated unit test generation technique for detecting vulnerabilities of Android kernel modules. The technique automatically generates unit test drivers/stubs and unit test inputs for each function of Android kernel modules by utilizing dynamic symbolic execution. To reduce false alarms caused by function pointers and missing pre-conditions of automated unit test generation technique, we develop false alarm reduction techniques that match function pointers by utilizing static analysis and generate pre-conditions by utilizing def-use analysis. We showed that the proposed technique could detect all existing vulnerabilities in the three modules of Android kernel 3.4. Also, the false alarm reduction techniques removed 44.9% of false alarms on average.