• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.155-159
• /
• 2000

This paper describes the self healing characteristics of metalized polypropylene film(MPPF) under ac condition. PDs were generally observed at relatively low voltage, and the PDIVs were differently varied depending on the number of pre-self healing due to void defects. Several pre-self healing events took place at lower voltage than the critical breakdown voltage of PPF. Self healing mainly occurred at pin tips, wrinkle sides, and cross points of wrinkles. The applied voltage at self healing was increased with PPF thickness. The burn out area at self healing was also increased with the applied voltage and PPF thickness. The peak currents in a grounding conductor at self healing was also increased with the applied voltage.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.31-36
• /
• 2004

본 논문에서는 UV 처리와 BOE 세정을 이용하여 레이저 어닐링 전의 실리콘 표면에 자연 산화막을 제거하여 다결정 실리콘 TFT의 신뢰성을 향상시키는 방법을 제안하였다. 전처리 공정이 다결정 실리콘의 표면 거칠기에 미치는 영향을 AFM으로 측정하였으며, 다결정 실리콘 TFT의 전기적 특성인 스위칭 특성과 항복특성을 대형 유리기판의 위치와 전처리의 유무에 대해서 조사하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.33-46
• /
• 2011

Concave surface boundary-layer flows are subjected to centrifugal instability which results in the formation of streamwise counter-rotating vortices. Such boundary layer flows have been experimentally investigated on concave surfaces of 1 m and 2 m radius of curvature. In the experiments, to obtain uniform vortex wavelengths, thin perturbation wires placed upstream and perpendicular to the concave surface leading edge, were used to pre-set the wavelengths. Velocity contours were obtained from hot-wire anemometer velocity measurements. The most amplified vortex wavelengths can be pre-set by the spanwise spacing of the thin wires and the free-stream velocity. The velocity contours on the cross-sectional planes at several streamwise locations show the growth and breakdown of the vortices. Three different vortex growth regions can be identified. The occurrence of a secondary instability mode is also shown as mushroom-like structures as a consequence of the non-linear growth of the streamwise vortices. Wall shear stress measurements on concave surface of 1 m radius of curvature reveal that the spanwise-averaged wall shear stress increases well beyond the flat plate boundary layer values. By pre-setting much larger or much smaller vortex wavelength than the most amplified one, the splitting or merging of the streamwise vortices will respectively occur.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.126-129
• /
• 2003

The electrical properties of a ZnO-based multilayered chip varistor (abbreviated as MLV) were studied as functions of firing condition and the degree of lamination. The fundamental varistor characteristics such as nonlinear coefficient and breakdown voltage were independent of the degree of lamination. As the number of the laminated ceramic sheets increased, however, not only the energy handling capability but also the capacitance and the leakage current which are relevant to delayed response to the voltage surge and the pre-breakdown energy loss, respectively, increased. With the increase of firing temperature between $950^{\circ}C$ and $1150^{\circ}C$, both the capacitance and the leakage current of the MLV increased due mainly to the grain growth of ZnO and the volatilization of $BiO_2O_3$. High performance MLVs with clear electrode pattern were obtained at the firing temperature range of $l000{\sim}1050^{\circ}C$ in this experiment.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권7호
• /
• pp.708-718
• /
• 1996

The microstructure and electrical properties of the nonlinear ZnO varistor with A1$_{2}$ $O_{3}$ additions is investigated. The variation of nonlinear behavior with A1$_{2}$ $O_{3}$ additions is indicated from J-E and C-V measurement to be a result of the change of the interface defects density $N_{t}$ at the grain boundaries and the donor concentration $N_{d}$ in the ZnO grains. The optimum composition which has the nonlinear coefficients of -57 was observed in the sample with 0.005wt% A1$_{2}$ $O_{3}$ additions. The conduction mechanism at the pre-breakdown region is consistent with a Schottky thermal emission process obeying a relation given by $J^{\var}$exp[-(.psi.-.betha. $E^{1}$2/)kT] and the conduction process at the breakdown region follows a Fowler-Nordheim tunneling mechanism of the form $J^{\var}$exp(-.gamma./E).

• The Journal of Korean Physical Therapy
• /
• 제15권3호
• /
• pp.153-165
• /
• 2003

This study was carried out to evaluate the body fat breakdown during topical seaweed extract treatment and in combination with the iontophoresis method to enhance skin absorption of lipolytic compounds. Of 14 female obesity subjects, 7 treated a gel types of seaweed extract only(control group) and 7 treated in combination with the iontophoresis(experimental group). Topical treatment of each sample was designed for 2 weeks, treated with 2 times a day about $10m{\ell}$ on the abdomen, triceps and thigh, respectively. Experimental group treat with the iontophoresis during 5 minutes immediately after topical treatment. After one and two weeks of topical treatment, measured body fat, skinfolds thickness, body circumference respectively. Then venous blood samples were taken and analyzed serum lipids. The results were as follows; 1) There were decrement of body weight, $\%$ of body fat, abdomen, triceps and thigh circumference and abdomen, triceps and thigh thickness between pre and post treatment in both group. These decrement were predominant in the iontophoresis treated group. Especially, there were $16\%$ of body fat decrement in the experimental group after two weeks iontophoresis treatment(control group VS experimental group = $33.54{\pm}2.70$ VS $28.37{\pm}3.38$, p<0.01). 2) There were decrement in total CHOL, LDL, TRIG and increment in HDL in both group. These phenomena were predominant in the iontophoresis treated group. CHOL decrement in the experimental group were significant after two weeks iontophoresis treatment(control group VS experimental group = $190.24{\pm}34.36$ VS $157.76{\pm}24.45$, p<0.001). These results suggest that the topical treatment of seaweed extract effective for fat breakdown and maximized in the combination with the topical seaweed extracts treatment and the iontophoresis.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.367-370
• /
• 2002

건설 프로젝트의 초기단계에 타당성을 검토함에 있어서 공통가설공사의 경우 설계도서상에 표시가 되지 않거나, 시방서상에 간략하게 서술되어 있기 때문에 담당자의 경험 의존율이 다른 공종에 비해 높다. 이런 초기단계의 결전은 프로젝트의 진행과 더불어 많은 문제점들을 야기 시킬 가능성이 있다. 따라서 최근 활발히 논의가 되고 있는 기존 공사정보에 대한 실적 데이터베이스와 공통가설공사의 분류체계를 포함한 시스템을 개발하여 자료들을 분석, 활용함으로써 시공전(Pre-Construction) 단계의 공통가설공사에 대한 작업 및 원가 예측을 용이하게 하고, 후에 Feed Back 됨으로써 정확한 건설 프로젝트 타당성 분석을 가능케 하고자 한다.

• Journal of Animal Science and Technology
• /
• 제62권2호
• /
• pp.247-262
• /
• 2020

Birth weight and subsequent weight gain is of critical importance in the survival and performance of piglets on a commercial swine farm setting. Oropharyngeal microbiome could influence immunity, and feeding behavior thus impacting health and weight gain. We used 16S rRNA gene sequencing to profile the composition and predicted metabolic functionality of the oropharyngeal microbiota in 8 piglets (4 with a birthweight ≤ 1.0 kg and 4 with a birthweight ≥ 1.7 kg) at 11, 26, and 63 days of age. We found 9 genera that were significantly associated with average daily gain (ADG) at 11 days (false discovery rate, FDR < 0.05) and 26 days of age (FDR < 0.1), respectively. The microbial functional profile revealed several pathways associated with ADG (FDR < 0.05). Among these, pathways related to degradation of catechols showed a positive association with ADG at 11, 26, and 63 days of age, implying a potential to breakdown the host-derived catecholamines. We also noted that pathways related to the biodegradation of nucleosides and nucleotides increased with ADG during the pre-weaning phase, while those involved in their biosynthesis decreased. Our findings provide insights into the oropharyngeal microbial memberships and metabolic pathways that are involved in a piglet's weight gain. Thus, providing a basis for the development of strategies aimed at improving weight gain in pigs.

• 조명전기설비학회논문지
• /
• 제14권4호
• /
• pp.77-82
• /
• 2000

본 논문은 교류전압 인가시 보이드 형상에 따른 금속증착 폴리프로필렌 필름(Metalized Polypropylene Film : MPPF)의 셀프힐링 특성에 대해 연구하였다. 보이드 결함으로 인해 발생하는 프리 셀프힐링의 횟수가 증가함에 따라 PDIV는 증가하였으며, 프리 셀프힐링은 FPF의 절연파괴전압보다 낮은 전압에서 발생하였다. 셀프힐링은 주로 핀형, 주름형, X/Y형 보이드의 에지, 주름선상 및 교차점에서 발생하였으며, 주셀프힐링 전압은 PFP의 두께에 따라 증가하였다. 또한, 셀프힐링시 증착금속의 비산면적은 인가전압에 따라 증가하였으며, 셀프힐링시의 피크전류는 MPPF에 인가된 전압에 따라 증가하였다.

• 대한교통학회지
• /
• 제28권3호
• /
• pp.29-37
• /
• 2010

도시고속도로 연결로 접속부 교통혼잡을 해결하기 위한 가장 대표적인 전략은 램프미터링 전략이다. 램프미터링 이란 고속도로의 유입램프에서 램프유입량을 조절하는 것을 말하며, 램프교통량을 제한함으로써 고속도로의 흐름을 정상 교통류로 유지시키는 것을 목적으로 한다. 본 연구에서는 램프미터링 기법중에서 고정식 미터링 방식을 기초로 하여, 동일한 미터링율이 본선에 진입할 때 차량진입방식(단일차량, 차량군)에 따라 본선 교통류에 미치는 영향을 비교분석하고 평가하고자 한다. 연결로 차량의 진입방식별 본선 교통류의 효과를 살펴본 결과, 동일한 미터링율에서 한 주기에 많은 연결로 차량들이 진입하는 다중차량진입방식이 본선교통류의 속도, 밀도, 지체 측면에서 불리한 것으로 분석되었고, 또한 교통와해가 조기에 발생하여 합류용량도 감소시키고 정체로 전이되어 낮은 속도를 갖는 것으로 나타났다. 이러한 결과들은 본선 교통량수준이 높을수록 연결로 진입방식에 따른 미터링 전략이 매우 중요하다는 것을 의미한다.