• Asian Pacific Journal of Cancer Prevention
• /
• 제14권12호
• /
• pp.7761-7762
• /
• 2013

Alternative strategies such as visual inspection of cervix with acetic acid, are real time, economical and easily implemented methods for cervical cancer screening. However, variable sensitivity and specificity have been observed in various community based studies. The possible reasons could include variation in man power training, light source used for visualization, and preparation of diluted (4-5%) acetic acid and its storage. A standardized protocol for training, teaching material (easy to understand in the local language) for trainees, supervision and reinforcement by intermittent and supplementary training to check the quality of their observation, a standard protocol for preparation dilute acetic acid and its storage and a standard good light source (equivalent to day light) are needed to minimize the variation in sensitivity and specificity of VIA in community settings.

• 정보학연구
• /
• 제12권4호
• /
• pp.33-37
• /
• 2009

This paper analyzed effects Web-Based cooperation Learning have on improvement in Social Adaptability and problematic behavior, using Web-Based cooperation Learning system that is designed for Mental retardation children. Is Made Teaching Design according to students level, based on elementary school Bareunsaenghwal subject. Teaching and Learning program that is going with flash and PPT Embodied is. Designed to bulletin the evaluation data for cooperation studying after studying a part of the lesson. Verification of learning effect went with experimental group and comparison group consisted of groups of 8. Students studied the Internet web data and Teaching material paper and they took pencil test. As a result, point of post-inspection was higher than that of pre-inspection. Web-Based cooperation Learning is confirmed to be effective on Social Adaptability and problematic behavior improvement.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.14-23
• /
• 2007

Welding fabrication invariantly involves three district sequential steps: preparation, actual process execution and post-weld inspection. One of the major problems in automating these steps and developing autonomous welding system is the lack of proper sensing strategies. Conventionally, machine vision is used in robotic arc welding only for the correction of pre-taught welding paths in single pass. However, in this paper, multipass tracking more than single pass tracking is performed by conventional seam tracking algorithm and developed one. And tracking performances of two algorithm are compared in multipass tracking. As the result, tracking performance in multi-pass welding shows superior conventional seam tracking algorithm to developed one.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.982-987
• /
• 2006

In general, the braking system of high speed train has an important role for the safety of the train. To stop safely the train at its pre-decided position, it is necessary to combine property the various brakes. Generally high speed train has adopted a combined electrical and mechanical (friction) braking system. Electrical brakes are consist of rheostatic brake, regenerative brake and eddy current brake and mechanical brakes are composed of disc brake, wheel disc brake and tread brake. In this paper, we introduce braking performance analysis and inspection though simulation and research to reduce braking distance.

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.46-49
• /
• 2008

NDE(Nondestructive examination) detects a flaw or discontinuity in materials. Flaws detected by the pre-service or in-service examinations shall be sized for the purpose of analysis and repair. A flaw that is initiated from the surface is difficult to determine its depth by NDE. The depth of the surface flaw can be measured using an ultrasonic diffracted wave. To find the optimum standard for ultrasonic parameter(For example, frequency & size of transducer), a mock-up test and simulation were established and studied. This inspection technology may show the depth sizing possibility of the flaw down to nearly two(2) mm.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권3호
• /
• pp.177-187
• /
• 2004

탄소섬유시트 보강보를 구성하는 재료들의 거동상태에 따라 탄성구간, 항복이전구간, 항복이후구간으로 나누어 보강보의 휨성능을 해석하였다. 보강보 후미해석의 타당성을 검증하기 위해 보강보 실험에서 측정된 항복하중, 최대하중, 휨강성 등을 비교하였다. 검증된 보강보 후미해석 방법으로부터 보강보의 구성재료가 보강보의 휨성능에 기여하는 바를 살펴보았다. 또한 보강보의 최대휨모멘트 산정에 강도설계법의 적용여부를 고찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2761-2763
• /
• 2002

원자력발전소에서는 건설완료 단계에서 기기, 배관 및 각종 지지구조물에 대하여 PSI(Pre-Service Inspection)를 실시하여 시공된 설비의 건전성을 점검하고, 운영중에는 주기적으로 시간의 경과에 따른 취약화 정도를 비과괴검사로 감시 및 평가하는 ISI (In-Service Inspection)를 실시하여 안전성 관련 설비의 건전성을 점검하고 있다. 이 과정에서 방대한 양의 검사데이터가 생산되며 원전 가동년수가 증가함에 따라 검사자원을 체계적으로 관리하고 자동화 할 수 있는 시스템 개발이 필요하게 되었다. 본 논문에서는 PSI/ISI 검사결과 정보관리를 비롯하여 검사 기초자료 관리 및 검사계획 수립, 파괴역학 분식 기능 등을 포함한 Web 기반의 Application 개발 사례를 소개한다. 또한 가상현실 기법을 적용하여 기존의 2차원적 DB 운영을 3차원 가상공간에서 운영할 수 있는 'Touch & Tell' 기법을 개발하고 그 구현방법을 제시한다.

• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.85-94
• /
• 1998

Welding fabrication invariantly involves three district sequential steps: preparation, actual process execution and post-weld inspection. One of the major problems in automating these steps and developing autonomous welding system, is the lack of proper sensing strategies. Conventionally, machine vision is used in robotic arc welding only for the correction of pre-taught welding paths in single pass. In this paper, developed vision processing techniques are detailed, and their application in welding fabrication is covered. The software for joint tracking system is finally proposed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.333-334
• /
• 2023

Interest in the commercialization of research results is increasing according to the recent social atmosphere. In the field of construction, new technologies are also being actively commercialized. Pre-analysis of products is an important procedure for future market entry. This study aims to conduct a product-based importance-performance analysis as one of the preliminary analysis methods for the commercialization of technologies developed in the field of construction and to explore their applicability. This study conducts a survey on those involved by setting the categories of product quality, convenience, and usability for the commercialization of previously developed pipeline inspection product. Based on this, we would like to present an analysis that calculates importance and performance of the product and helps to set the development direction through interrelationship analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.572-577
• /
• 1994

The automatic detection of artifacts and vigilance level as for pre-processing of the automatic EEG interpretation are discussed. The equations for detecting artifacts and vigilance level were determined such that they would conform to the procedures that an EEGer (one of the authors, H.S.) usually adopts for visual inspection of the actual EEG record. The automatic EEG interpretation was found to be improved by the newly developed pre-processing method even will artifact contamination or in drowsy condition of the subjects.