• 대한건축학회논문집:구조계
• /
• 제36권2호
• /
• pp.127-136
• /
• 2020

Prism compressive strength is the most influential parameter to evaluate the seismic performance of non-structural concrete brick masonry walls, and is affected by the practice and workmanship of masonry workers. This study experimentally investigates the influence of workmanship on prism compressive strength throughout the compressive test with prism specimens constructed according to masonry workmanship. To do this, the workmanship is categorized into good, fair, and poor conditions which are statistically evaluated with thickness and indentation depth of bed-joints. Then, the effect of workmanship on the structural properties of masonry prisms is evaluated by investigating relations between properties such as their compressive strength, elastic modulus and numerical parameters such as thickness, filling of bed-joints. This study demonstrates that the indentation depth is more important parameter for structural properties of masonry prisms and masonry prisms with loss in bed-joint area less than of 7% can be in fair condition.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.596-601
• /
• 2013

In the current pavement construction practice, the state agencies traditionally determine the quality of the as-constructed pavement mix based on individual mixture material parameters (e.g., air voids, cement or asphalt content, aggregate gradation, etc.) and consider these parameters as key variables to influence payment schedule to the contractors and the present and future quality of the as-constructed mixture. A set of empirically pre-determined pay adjustment schedule for each parameter that was differently developed and being used by the individual agencies is then applied to a given project, in order to judge whether each parameter conforms to the designated specifications and consequently the contractor may either be rewarded or penalized in accordance with the payment schedule. With an improved quality assurance system, the Performance Related Specification, the individual parameters are not utilized as a direct judgment factor; rather, they become independent variables within a performance prediction function which is directly used to predict the performance. The quantified performance based on the prediction model is then applied to evaluate the pavement quality. This paper presents the brief history of the quality assurance in asphalt pavement construction including the Performance Related Specifications, statistical performance models in terms of fatigue and rutting distresses, as an example of the performance prediction models, and envisions the possibilities as to how this Performance Related Specification could be utilized in other infrastructures construction quality assurance.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제18권1호
• /
• pp.10-15
• /
• 2007

Probably the three most important components to a comprehensive evaluation of patients with attention-deficit hyperactivity disorder (ADHD) are the clinical interview, the medical examination, and the completion and scoring or behavior rating scales. Teachers and other school personnel are often the first to recognize that a child or adolescent might have ADHD, and often play an important role in the help-seeking/referral process. A diagnostic evaluation for ADHD should include questions about ADHD symptoms, other problems including alcohol and drug use, family history of ADHD, prior evaluation and treatment for ADHD. Screening interview or rating scales as well as interviews should be used. When it is feasible, clinicians may wish to supplement these components of the evaluation with objective assessments of the ADHD symptoms, such as psychological tests. These tests are not essential to reaching a diagnosis, however, or to treatment planning, but they may yield further information about the presence and severity of cognitive impairments that could be associated with some cases of ADHD. Screening for intellectual ability and academic achievement skills is also important in determining the presence of comorbid developmental delay or loaming disabilities. The number and type of symptoms required for a diagnosis of ADHD vary depending on the specific subtype. To receive a diagnosis of ADHD, the person must be experiencing significant distress or impairment in daily functioning, and must not meet criteria for other mental disorders which might better account for the observed symptoms such as mental retardation, autism or other pervasive developmental disorders, mood disorders, anxiety disorders. This report aims to suggest a practice guideline of assessment and diagnosis for children and adolescents with ADHD in Korea.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제28권2호
• /
• pp.58-69
• /
• 2017

Attention-deficit hyperactivity disorder (ADHD) is a highly prevalent, impairing, and comorbid disorder that persists into adulthood. ADHD should be diagnosed in the same manner as other common adult mental health disorders. The three most important components in the comprehensive evaluation of patients with ADHD are the clinical interview, medical examination, and completion and scoring of behavior rating scales. The diagnostic evaluation of ADHD should include questions about the symptoms, family history, prior evaluation and treatment of ADHD, as well as other problems including alcohol and drug use. Screening interviews or rating scales, as well as interviews, should be used. When it is feasible, clinicians may wish to supplement these components of the evaluation with the objective assessments of the ADHD symptoms, such as through psychological tests. These tests are not essential to reaching a diagnosis, however, or to treatment planning, but may yield further information about the presence and severity of cognitive impairments that could be associated with some cases of ADHD. As comorbidity is the rule rather than the exception, clinicians should carefully screen for comorbid disorders as part of a comprehensive assessment of ADHD. To receive a diagnosis of ADHD, the person must be experiencing significant distress or impairment in his or her daily functioning, and must not meet the criteria for other mental disorders which might better account for the observed symptoms, such as mental retardation, autism or other pervasive developmental disorders, mood disorders and anxiety disorders. This report aims to suggest practice guidelines for the assessment and diagnosis of children, adolescents and adults with ADHD in Korea.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.2031-2042
• /
• 2017

In this paper, a novel traffic flow control method based-on ramp metering and speed regulation using an adaptive sliding mode control (ASMC) method along with a deadzoned parameter adaptation law is proposed at a stochastic macroscopic level traffic environment, where the influence of the density and speed disturbances is accounted for in the traffic dynamic equations. The goal of this paper is to design a local traffic flow controller using both ramp metering and speed regulation based on ASMC, in order to achieve the desired density and speed for the maintenance of the maximum mainline throughput against disturbances in practice. The proposed method is advantageous in that it can improve the traffic flow performance compared to the traditional methods using only ramp metering, even in the presence of ramp storage limitation and disturbances. Moreover, a prior knowledge of disturbance magnitude is not required in the process of designing the controller unlike the conventional sliding mode controller. A stability analysis is presented to show that the traffic system under the proposed traffic flow control method is guaranteed to be uniformly bounded and its ultimate bound can be adjusted to be sufficiently small in terms of deadzone. The validity of the proposed method is demonstrated under different traffic situations (i.e., different initial traffic status), in the sense that the proposed control method is capable of stabilizing traffic flow better than the previously well-known Asservissement Lineaire d'Entree Autoroutiere (ALINEA) strategy and also feedback linearization control (FLC) method.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.557-570
• /
• 2024

Due to interfacial ageing, chemical action and interfacial damage, the interface debonding may appear in the interfaces of composite laminates. Particularly, the laminates display a side-dependent effect at small scale. In this work, a three-dimensional (3D) and anisotropic thick nanoplate model is proposed to investigate the effects of imperfect interface and nonlocal parameter on the bending deformation, vibrational response and buckling stability of one-dimensional (1D) hexagonal quasicrystal (QC) layered nanoplates. By combining the linear spring model with the transferring matrix method, exact solutions of phonon and phason displacements, phonon and phason stresses of bending deformation, the natural frequencies of vibration and the critical buckling loads of 1D hexagonal QC layered nanoplates are derived with imperfect interfaces and nonlocal effects. Numerical examples are illustrated to demonstrate the effects of the imperfect interface parameter, aspect ratio, thickness, nonlocal parameter, and stacking sequence on the bending deformation, the vibrational response and the critical buckling load of 1D hexagonal QC layered nanoplate. The results indicate that both the interface debonding and nonlocal effect can reduce the stiffness and stability of layered nanoplates. Increasing thickness of QC coatings can enhance the stability of sandwich nanoplates with the perfect interfaces, while it can reduce first and then enhance the stability of sandwich nanoplates with the imperfect interfaces. The biaxial compression easily results in an instability of the QC layered nanoplates compared to uniaxial compression. QC material is suitable for surface layers in layered structures. The mechanical behavior of QC layered nanoplates can be optimized by imposing imperfect interfaces and controlling the stacking sequence artificially. The present solutions are helpful for the various numerical methods, thin nanoplate theories and the optimal design of QC nano-composites in engineering practice with interfacial debonding.

• 한국소프트웨어감정평가학회 논문지
• /
• 제17권2호
• /
• pp.109-116
• /
• 2021

전통적으로 공학분야는 실험 실습 위주의 대면 교육이 주를 이루어 왔으나, IT 기술 및 인터넷 통신망의 급속한 발전과 최근 COVID-19 등의 사회적 환경 변화로 인해 온라인 학습에 대한 수요가 급증하고 있다. 다른 분야에 비해 실험 실습의 비중이 상대적으로 높은 공학 분야에서 효율적인 온라인 교육이 이루어지려면 실제 실험 실습을 대체할 수 있는 가상 실험실습 콘텐츠가 매우 필요하다. 본 연구에서는 전기전자 분야 뿐만 아니라 IT 융합이 이루어지고 있는 전반적인 공학 분야에서 필수적으로 사용되고 있는 마이크로프로세서의 효율적인 온라인 응용 학습을 위해 라인 트레이서 모델을 개발하고 이를 시뮬레이션 할 수 있는 가상실험 소프트웨어를 개발하였다. 개발된 라인 트레이서 모델에서 사용자는 원하는 형태로 하드웨어 파라미터 값들을 다양하게 설정하고, 이에 따른 소프트웨어를 어셈블리 언어나 C 언어 등으로 작성하여 컴퓨터 상에서 동작을 시험해 볼 수 있도록 구성되었다. 개발된 라인 트레이서 가상 실험 소프트웨어는 실제 수업에 활용하여 동작을 검증하였으며, 앞으로 온라인 상에서 이루어지는 비대면 수업에서 효율적인 가상 실험 실습 도구가 될 것으로 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1905-1910
• /
• 2003

It is well known that parameter uncertainties and time-delays cannot be avoided in practice and result in poor performance and even instability. Nevertheless, to the authors' best knowledge, there exist few results on model predictive control (MPC) handling explicitly uncertain time-delayed systems. In this paper, we present an MPC algorithm for uncertain time-varying systems with input constraints and state-delay. An optimization problem is suggested to find a memoryless state-feedback MPC law and the closed-loop stability is established under feasibility and certain conditions.

• 한국습지학회지
• /
• 제2권1호
• /
• pp.49-58
• /
• 2000

The frequency analysis of annual maximum rainfall data and the derivation of probable rainfall intensity formula at Masan station are performed in this study. Based on the eight different rainfall duration data from 10 minutes to 24 hours, eight types of probability distribution (Gamma, Lognormal, Log-Pearson type III, GEV, Gumbel, Log-Gumbel, Weibull, and Wakeby distributions), three types of parameter estimation scheme (moment, maximum likelihood and probability weighted methods) and three types of goodness-of-fit test (${\chi}^2$, Kolmogorov-Smirnov and Cramer von Mises tests) were considered to find an appropriate probability distribution at Masan station. The Lognormal-2 distribution was selected and the probable rainfall intensity formula was derived by regression analysis. The derived formula can be used for estimating rainfall quantiles of the Masan vicinity areas with convenience and reliability in practice.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권8호
• /
• pp.1298-1309
• /
• 1999

The nutritional value of protein varies between feedstuffs. It is possible to feed animals using crystalline amino acids as a sole nitrogen source, but in practice only some limiting amino acids are added to the diet. In order to use feedstuffs efficiently, it is important to determine exact amino acid requirements. Reported values differ widely because the requirements are affected by various factors. In this report, therefore, the factors affecting amino acid requirements are reviewed as follows: 1) availability of dietary amino acids, conversion factors of nitrogen to protein, interaction of amino acids, and strain, sex and age of animals; 2) amino acid requirements for maximum performance and maintenance, usefulness of non-essential amino acids; 3) plasma amino acid concentration as a parameter to determine amino acid requirements; and 4) nitrogen excretion to reduce environmental pollution. These factors should be considered, it is to improve the dietary efficiency, which is to reduce excess nitrogen excretion for environmental pollution.